.
- Original Message -
From: Tim Krause
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday, December 05, 2011 12:47 AM
Subject: Re: Re: Extruded rail material source
http://dependableacme.com/class.htm#screwis one source of 5/8-4tpi acme
thread in long lengths. I don't know
, December 05, 2011 12:47 AM
Subject: Re: Re: Extruded rail material source
http://dependableacme.com/class.htm#screwisone source of 5/8-4tpi acme
thread in long lengths. I don't know if they do international shipping or
not.
-Tim
- Original Message -
From: Bill
, December 05, 2011 4:25 AM
To: Legacy Ornamental Mills
Subject: Re: Extruded rail material source
Hello All,
Other than needing to acquire a longer lead screw, what is there
preventing someone from using two 900s to make a 8 foot system? I
believe the carriage would still be able to ride through from
,
Grant
-Original Message-
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of begatbrown
Sent: Monday, December 05, 2011 4:25 AM
To: Legacy Ornamental Mills
Subject: Re: Extruded rail material source
Hello All,
Other than
12:56 AM
Subject: Re: Extruded rail material source
Hi guys
Let me just correct one small item, Legacy are not out of the large or
small ornamental mill market. They have had to do what any sane
business person would do in a business down turn, they have looked at
their market and consolidated
, December 05, 2011 12:47 AM
Subject: Re: Re: Extruded rail material source
http://dependableacme.com/class.htm#screwisone source of 5/8-4tpi
acme thread in long lengths. I don't know if they do international
shipping or not.
-Tim
- Original Message -
From: Bill
@googlegroups.com
Sent: Monday, December 05, 2011 10:34 AM
Subject: Re: Extruded rail material source
Hello Roger,
It's good to know the legacy's still interested in the manual market on both
the large and the small end. Yet, as I tell me friends on Wall Street, in the
long run the market may
thank you Carl when you say similar did they have anything with the wide groove
in it the same that is in the legacy rails that's the hard one to find the wide
groove
Bill
- Original Message -
From: carsten stigers
To: legacy-ornamental-mills@googlegroups.com
Sent: Monday,
Bill, If memory serves me right the tekno slot will take a 3/4 wide 1/4 thick piece of bar stock which we used to drill out to either 1/4-20 or 5/16-18 for standard bolts. I do believe that when you download the modutek catalogue is shows the bolt head also sliding in the slot. I have been moving
, 2011 9:27 PM
Subject: Re: Re: Extruded rail material source
interesting, I am very interested in the longer acme thread is it 1/4 pitch
4TPI like the legacy one? please can you give me the web sight of that
Bill
- Original Message -
From: carstenstig...@verizon.net
10 matches
Mail list logo