s
> *Sent:* Saturday, 22 July 2017 3:33 AM
> *To:* Legacy Ornamental Mills
> *Subject:* Re: Wiring diagram
>
>
>
> Tim
>
> The drive motor is on but I just can't think where to put the control box.
> Looks like it's going to be on the carriage -- but a b
Mills
Subject: Re: Wiring diagram
Tim
The drive motor is on but I just can't think where to put the control box.
Looks like it's going to be on the carriage -- but a bit prone to get
damaged in that position.
The way I have the Revo mounted- it is fastened to a 3/4 " sheet of
58 . It works well. The motor side
>>> coupler slides away for free spinning. The other side connects to a 5/8"
>>> shaft that connects to the lead screw with a solid coupler. Does that make
>>> sense? I think I can find a photo if you need one.
>>>
&
he other side connects to a
>5/8"
>> shaft that connects to the lead screw with a solid coupler. Does
>that make
>> sense? I think I can find a photo if you need one.
>>
>> Hope that helps a little.
>>
>> Tim
>>
>>
>> Sent f
=10066>
> On Jul 20, 2017, at 11:41 PM, Richard Ellis <rchrd....@gmail.com
> > wrote:
>>
>> Tim
>> Thanks for the answer, If there has been no wiring diagram for the
>> Legacy, that is all I needed to know. I was a little surprised that no one
>> a
Tim
Thanks for the answer, If there has been no wiring diagram for the Legacy,
that is all I needed to know. I was a little surprised that no one asked
what power voltage I was thinking of using, could have been 12 or 24 volt
dc as i;e Windscreen wiper motors,.I don't think that would kill me
Well I knew my generic answer was not going to be enough. I'm not aware of a
wiring diagram for the legacy drive system. It was all pre-wired and the
manuals only showed where to and how to mount the components to the machine.
Since you are familiar with electronic, I'm not sure where you
Roger
I asked for a wiring diagram, No good looking at the wires ---I HAVE
NONE regards safety, I have an always do take note !! However I do
not think a wiring diagram as used by legacy is going to kill me. I have
been involved with electrics for many years, *A wiring diagram
ever seen a wiring diagram for the drive motor,
>controller and limit switches
>
>Be nice to have it hope someone does and posts it
>
>
>
>Bill
>
>
>
>
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] O
have ever seen a wiring diagram for the drive motor, controller
and limit switches
Be nice to have it hope someone does and posts it
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Thursday, 20 July 2017 5:2
I don’t think i have ever seen a wiring diagram for the drive motor, controller
and limit switches
Be nice to have it hope someone does and posts it
Bill
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent
of a professional. That is what help I can offer you at the moment.
-TIM
Sent from BlueMail
On Jul 20, 2017, 12:23 AM, at 12:23 AM, Richard Ellis <rchrd.ell...@gmail.com>
wrote:
>Hi All
>I have now got a motor for my Revo, Leadscrew but am a bit stuck
>for a
>wiring
Hi All
I have now got a motor for my Revo, Leadscrew but am a bit stuck for a
wiring diagram, I assume they are the same for other Legacy non CNC models.
If any one has one that shows the control box and limit switches etc. Can
you post it on here or email me
Thanks
Richard
--
You received
13 matches
Mail list logo