Hi Guys.
My head hurts just trying to work this out.
But how about doing it the old faction way. and still use the legacy.
What I am thinking is, angle your board (as Mike Suggested.)
cut your dove tails like you would doing regular mortises/flutes.
then transpier the dovetails into your mating
Roger,
I had to take another look at your sketch. I see what you're doing now. I think
you're right on as this is the way to go.
So I'm clear, I would rip a series of spacers all the same size and line them
up on 2 pieces of wood (the spacing between them being the width of my piece)
at a 45 d
Andy, think of it as building a large dovetail jig, like Leigh, only the
fingers where the guide bushing rides are a lot longer, if you cut the
spacers all the same size you end up with equally spaced tails On the wood,
just make it long enough that you can cut all of them without moving the
jig, I
iding dove tails on the mill
I was originally planning on rotating the stock to 45 degrees and then use
the Y axis only to cut the sliding dovetails. The more i think about this,
It may be easier to perform on my router table by making a jig to cut my
first 45 deg dovetail slot. Then pull that off
I was originally planning on rotating the stock to 45 degrees and then use the
Y axis only to cut the sliding dovetails. The more i think about this, It may
be easier to perform on my router table by making a jig to cut my first 45 deg
dovetail slot. Then pull that off and mount a piece of squar
.
_
From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Wednesday, August 01, 2012 5:41 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: sliding dove tails on the mill
I think the jig you are referring to is shown
To: legacy-ornamental-mills@googlegroups.com
Sent: Wednesday, August 01, 2012 8:49 PM
Subject: Re: sliding dove tails on the mill
yes thats it a more accurat one could be made i think, then you would not
have to move the wood for each few slots well thats my crazy idea i get lots of
those :)
02, 2012 10:37 AM
Subject: Re: sliding dove tails on the mill
Bill is this what you are sugesting?
- Original Message -
From: Bill Bulkeley
To: legacy-ornamental-mills@googlegroups.com
Sent: Wednesday, August 01, 2012 8:08 PM
Subject: Re: sliding dove tails on
, 2012 5:08 PM
Subject: Re: sliding dove tails on the mill
legacy made an old jig for doing square spirals which would do a pattern like
that I'm sure it would not be too hard to make something similar I cant show
you a picture as I lost all my legacy information in my house fire but I&#
Agree, stock needs to be angled not the cut.
- Original Message -
From: Okla Mike (Liltwisted)
To: legacy-ornamental-mills@googlegroups.com
Sent: Wednesday, August 01, 2012 5:21 PM
Subject: Re: sliding dove tails on the mill
Instead of a angled travel for the router as
sage -
*From:* Andy <mailto:atmarti...@gmail.com>
*To:* legacy-ornamental-mills@googlegroups.com
<mailto:legacy-ornamental-mills@googlegroups.com>
*Sent:* Thursday, August 02, 2012 1:31 AM
*Subject:* sliding dove tails on the mill
Okay, I have a desire to try
Subject: sliding dove tails on the mill
Okay, I have a desire to try this on my mill. I've read that it can only be
reasonably achieved using a CNC. However. I think if you somehow used a
dovetail jig (i was thinking the portercable dovetail jig because that's what i
have) to pro
ble but an incra router
fence might get you close. Same problem of getting each pin and tails to be
the same width. Even with a cnc, you need to sneak up on the dimensions.
-Tim
- Original Message -
From: "Andy"
To:
Sent: Wednesday, August 01, 2012 10:12 AM
Subject: Re: s
I'm building my twin screw face vise for my bench and wanted to add something
unique to the jaws. The picture is exactly what I'm trying to copy. It give the
illusion that all 4 sides are dovetailed together when infact they are simply
sliding dovetails on a 45 deg angle. Because of the 45 deg a
groups.com
Sent: Wednesday, August 01, 2012 11:31 AM
Subject: sliding dove tails on the mill
Okay, I have a desire to try this on my mill. I've read that it can only be
reasonably achieved using a CNC. However. I think if you somehow used a
dovetail jig (i was thinking the portercable dovet
@googlegroups.com
Subject: sliding dove tails on the mill
Okay, I have a desire to try this on my mill. I've read that it can only be
reasonably achieved using a CNC. However. I think if you somehow used a
dovetail jig (i was thinking the portercable dovetail jig because that's
what
: legacy-ornamental-mills@googlegroups.com
Sent: Wednesday, August 01, 2012 8:31 AM
Subject: sliding dove tails on the mill
Okay, I have a desire to try this on my mill. I've read that it can only be
reasonably achieved using a CNC. However. I think if you somehow used a
dovetail j
Okay, I have a desire to try this on my mill. I've read that it can only be
reasonably achieved using a CNC. However. I think if you somehow used a
dovetail jig (i was thinking the portercable dovetail jig because that's
what i have) to properly space the cuts and offset the 2 pieces so you cut
18 matches
Mail list logo
