Bill Wilson wrote:
Exactly my sentiments! There are some helpful people here but there
are also many on this list who will berate anyone for any small
infraction or the slightest mistake.
I must disagree with your assessment that there are many on this list who will
berate anyone.
It is an
Dave Naylor wrote:
Hello folks
The recent insults, etc. have shown that Millennia are unable to run
a mailing list correctly. In my opinion this is the last straw for a
list that has had more than its share of upsets and angry members.
Not only is there inadequate moderation of this list,
Roy Ferguson wrote:
Because it is MRIN 2, not phantom 35, that is then deleted.
Working on a back up copy of course, I would print out all information on the corrupted individual
(Not to imply your wife is corrupt) then I would delete the individual. I would then run a
check/repair and
Belinda wrote:
Thanks Ron and Jane,
Ron I was being lazy I suppose. As I tend to use narratives I was hoping to
utilize the pre-defined sentences. Oh well, best come up with my own not
that that is too difficult but I would have been interested to see what
sentence the output would have been
Alan Jones wrote:
Sourcing a Birth Announcement
I was wondering how one would source a Birth Announcement card one gets
in the mail from the parents announcing a child's birth? They usually
I create a source with:
Source List Name - Birth Announcement - [person's name here]
Type - Written
momalo...@aol.com wrote:
On start up, I use the Tips Window, so I can continue to learn about Legacy
BUT the print is so small, it is hard to read. How can I change this to say
a 20 point . . . or even less would be better.
Grab a corner of the window and drag it to enlarge the window.
momalo...@aol.com wrote:
Just now, I got my FIRST Family Pedigree Report to print (38) pages, BUT, it
printed in reverse (GOOD) BUT the Printer ran out of paper. I still need
Pages 1, 2, 3. How should I go about this???
By following the directions that came with your printer describing
ronald ferguson wrote:
Keith,
Milltown, Bannocburn, Scotland is perfectly correct. I understand you to mean that it does not work in the Geo Location Database, and you are correct (although I haven't tried this one). This is because it is an American designed Database for American locations.
MKO wrote:
Ok I found the address button.
Unless I don’t understand something here I have never liked this much as
it is only for the current address and has no history.
I prefer to use events to keep track of where people have lived.
Anyway, the only way I can find to access the address
Kathy Westlake wrote:
Good AM
I purchased Legacy 7.0 in May at the Ontario Genealogy Conference in
London, ON.
I loaded on my home pc and my laptop. I take my laptop to do research
with. Everything worked great for me until I upgraded the laptop with
the latest updates for 7.0
jmglover wrote:
Hello Dennis,
Yes, I did copy it to the hard drive, and it works perfectly there,
jut wont open from the flash drive. I'll copy it from the hard drive to the
flash later this evening, and see if it works then.
Thanks for replying,
Cheers,
Jill
Brisbane
myrn...@prodigy.net.mx wrote:
Gene,
I have several flash drives of varying sizes and none of them
have a slide anywhere. We also have two MP3 players and they both
have slides to lock them. Is there something I am missing?
Not all USB Drives have the lock-out switch. If it does, it is
Elizabeth Richardson wrote:
Ruth - a gedcom works anywhere. It's the Legacy file itself that can't
be opened in a previous version. Go ahead and try it!
What she said is that all she has is a V. 7 LEGACY File. Apparently she had V.7 loaded, opened her
file (thus converting it) then
Dennis M. Kowallek wrote:
On Wed, 24 Dec 2008 17:00:46 -0800, JLB j...@telus.net wrote:
Has it ever been possible to set fonts for the Descendants Book report
for html output, or am I expecting too much?
Use CSS style sheets. Very easy and you can change the fonts for the entire web site by
JLB wrote:
This is not for a website. I'm just trying to output dozens of
Descendant Book reports one at a time using a specific font. I can
change the font after the fact using Kompozer but I'd rather, of course,
be able to set it to what I want before producing each report.
-
JL
JLiki
Michael Harnois wrote:
I tried today to use IntelliShare and have no idea what went wrong.
I had given my wife a copy of the file and she had made changes to
maybe a dozen entries out of about 4000. Imported the file with no
problem. Ran IntelliShare and it came up with 9067783 duplicates
GeoSci wrote:
ELIZ Said:
The beta site is now the pilot site and can be accessed thru
familysearch.org
NOW - has anyone come up with the Customized Search String needed to
use the Search Internet for Current Person option?
momalo...@aol.com wrote:
Some
one sent me a HORRIBLE email to download about Christmas, graphics,
homepage changes, etc. and I can't even find the name of it now.
Before you do anything else, run a good antivirus program. When you can, have your computer guy
clean out your hard drive.
Elizabeth Richardson wrote:
JL, I don't usually work from the Name List (I prefer Family View), but
I just checked and I can cite a new source from there if I wish.
However, the buttons available were New and Cite only.
If you select a souce, the Edit Detail and Del buttons become active.
[EMAIL PROTECTED] wrote:
I have been a member for three years? Why am I suddenly excluded from
posting a message??!!!
In as much as your message made it to the list you are obviously NOT excluded. That message was an
anomaly to be ignored.
--
Gene Y.
n2kvs
Researching Young, Zies, Harer
I hope that Millenia releases a list of what defaults this latest update changed. It has screwed up
a lot of settings that I keep finding, some of which will take me HOURS to correct. This is very
poor behavior for any program update. I have just discovered that I have to edit every single
Has anyone else experienced that the push pins in the master locations maps do not show after
updating to 7.0.0.76?
--
Gene Y.
n2kvs
Researching Young, Zies, Harer Cox with
Legacy Family Tree
http://h1.ripway.com/egptech/
Legacy User Group guidelines:
Carolyn Smith wrote:
I have ancestors in my database [Legacy 7 (Deluxe)] that emigrated to
the US from the Hungarian part of the Austro-Hungarian Empire (now
Slovakia). In entering data, I have read I should put the current
location in the Location Field (that reflects where the vital records
Michele Lewis wrote:
I am sitting here playing around with the creating web pages function.
I do like how you can preview how it will look before it uploads.
If y'all have a web site created by Legacy do you mind linking it here
so that I can browse some examples?
michele
This was
GeoSci wrote:
We are not to place LINKS on the list (text only) - but mine is shown
in my signature (below). Just copy and paste. Pick the Latest Family
Tree.
Keith
Putting a link in a signature is the same as putting it the message body. There is no difference,
it is still in the
music-line wrote:
Hi Susan,
The link you gave me included messages from Feb 2006 - June 2006. Thanks
for that. It does seem to me that, in order to encourage people to use the
archives, they need to be sorted out a little! Perhaps someone from the
Millennia team might be able to help.
Best
SHIRLEY ANDERSON wrote:
I just upgraded to 7deluxe so I could strip HTML, only to find that the strip HTML button
has disappeared. It is mentioned in Help. I know the workaround to save the
information in a text program, but I have over 100 items to strip. They are from the
pilot Family
marilyn E B wrote:
I need to know if the number of messages on the Legacy User Group has
dwindled to almost nothing. If not I am not receiving all the group
messages. I have searched my spam and none there. As I use Gmail I will
have to figure out where to go to find where my messages are
JLB wrote:
It's not way way complicated. This is what I'm after:
Person 1/Cemetery A/county/state
Person 2/Cemetery A/county/state
Person 3/Cemetery A/county/state
Person 4/Cemetery B/county/state
Person 5/Cemetery B/county/state
Person 6/Cemetery C/county/state
Person 7/Cemetery C/county/state
Tish wrote:
I am wondering if I could put into the family files - a fake file just
to practice all the different and wonderful things that are in Legacy
7. Would this harm all the info I have in there that is legit? Could I
delete it when I am finished without harming the information that I
ronald ferguson wrote:
Dave,
I take it you mean Burial *Addresses*, which is what this thread is about. The
problem is, as JLB has drawn to our attention, this field cannot be searched.
Ron Ferguson
Actually it can be searched. I just tested this. Go to search Query by example and in
such as they exist in my database. I do not put
cemetery names anywhere except in the Burial Address field that follows
the Burial field by the +sign.
-
JL
JLog - simple computer technology for genealogists
http://www.jgen.ws/jlog
Gene Young wrote:
Actually it can be searched. I just tested
Pat wrote:
Thanks Bill,
I have a HP C4280 scanner/printer and the scanned negative looks real
good on the monitor. So far I can't find how to change it to a positive
using just my printer.
Pat
As has been mentioned, download Irfanview (totally free) and open the image in it. On the
Mary Figgins wrote:
I have an interested case that others might have especially with
military deaths. Clarence was killed in Central Africa 11 July 1943 and
was buried in a small church there on 14 July 1943. He was later
reburied in Lake Cemetery, Republic, Republic County, Kansas on 20
Mike Fry wrote:
Kate Myslinski wrote:
Help!
I hope your panties are fireproof!
What he means is that you sent an attachment to the list. That is a big NO NO. Please read the
group guidelines, accessible by the link
Mary Young wrote:
After I generate my Legacy website (Pedigree pages), Legacy tells me
it's handled 774 Individuals
But the Surname Page in the set says This site contains 650 Individuals ...
Why the discrepancy in numbers?
Regards
Mary Young
If you stop and think about it, the program must
Kelly Horst wrote:
Good Morning,
I have just upgraded to Legacy 7.0 (Deluxe) and am trying to convert my
Basic Sources. According to the User Manual the Source Template
Conversion Tool is reached from the Master Source List by clicking the
Options Button and then choosing Source Template
GeoSci wrote:
Recently discovered an ODD twist - that REALLY messes things up! In
the past - I could go to Cite a Source - pick on (say 1910 Lancaster
County, PA Census) - choose EDIT and make a new one for 1920 - then
HAD AN OPTION TO SAVE AS A NEW SOURCE or REPLACE THE OLD ONE. Lately
-
Wynthner wrote:
AMEN!
Luckily, the program I use has an ID number for each individual you can
change.. but thankfully that does *not* change the internal record number
Carol,
It puzzles me why Legacy even has this feature. Since Legacy is a
relational database, an RIN is nothing
Dick Davis wrote:
In response to Richard's posting, I would like to know if the new
version of Legacy calculates all the relationships in the tree? I know
that in Version 6, the tree stopped at a lower level, but did not do all
the relationships. With this limitation in the earlier version, it
Mary Young wrote:
On 9/23/08, *RICHARD SCHULTHIES* wrote:
That is accurate. The program calculates the new relationships only
when asked.
I don't think this is the case in v.6. I Set Relationships for myself,
then created a new son for my parents. _Without resetting relationships_
Lavern Hall wrote:
Greetings!
Is there a way to make a report that would take all the names in my
database and group them by date? An example of what I'd like to generate
is a list of names that would reflect all the births for a given year.
Is that possible?
Thanks for the help,
Roger Jarrett wrote:
Does anyone know how to quickly clear the Not Duplicate List without
having to remove each entry one at the time. I have over one thousand
entries :(
Roger
FIRST!!!
Make a fresh back-up of your family file and then make a copy of your file and do all your work on
the
Michele Lewis wrote:
On the Family View Screen I have tags 1, 2, 3 displayed. I taged
everyone on Tag 1.
michele
I have several people tagged as #1. None of these tags show up on the Family view screen. Only the
Marriage tags display there. The individual tags only show up on the
Lill Ann Parry wrote:
In your original post, I believe that you said that you tagged them as
9. If you have 1,2,3 dispalyed on the initial family view screen, you
need to open each individual to see all nine tags and verify that the 9
tag is marked.
Lill Ann
Michele Lewis wrote:
NOTE:
On
ronald ferguson wrote:
Date: Fri, 19 Sep 2008 11:39:13 -0400
From: [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] Tag problem again
Michele Lewis wrote:
On the Family View Screen I have tags 1, 2, 3 displayed. I taged
everyone on Tag 1.
michele
I have
Elizabeth Richardson wrote:
- Original Message - From: Gene Young [EMAIL PROTECTED]
To: LegacyUserGroup@legacyfamilytree.com
Sent: Friday, September 19, 2008 8:33 AM
Subject: Re: [LegacyUG] Tag problem again
All nine tags show on the bottom of the individual screen and all nine
Richard and Evita Piepho wrote:
Myrna...well I didn't get those messages until I joined the
legacyusergroup so I know it is coming from legacy... And I have anti
virus but being let through because it is from legacy... Richard
No, it is not coming from Legacy. It is coming from someone who
Evert van Dijken wrote:
No problem with the Archive now.
Evert
At 11:59 AM Eastern Daylight Saving Time this is what displays on the archive page when viewing
sorted by thread.
# KlikRupiah lviant
# CARA GRATIS VERIFIKASI Paypal lviant
# Langkah Baru lviant
# INVESTASI MURAH PASTI.!!
v pedersen wrote:
I am using the standard Legacy 7 as a trial right now. I am looking for
an alternative to FTM. I have several questions, but will ask one at a
time and hope to get at least a few people's ideas or comments on each.
My first question is how does one enter a child when the
Gary Templeman wrote:
Ruth,
Did you check out any of the solutions I posted yesterday? The entire
series of messages on this topic today seems to indicate *no one* has
considered what I posted as viable options. I listed three PDF
converters and you can Google for more. Personally, if I had
Michael A. Palmieri wrote:
Sherry,
To ignore something you assume we have control. It is your organization
that has control of the issue and the barking from fellow listers should
let you know we do not want you to ignore it.
Block the address (your statement tells us you can) until you
Jim Hughes wrote:
Good Day ...
... your direction is appreciated
... I searched but, could not find a 'person, and/or, title' to direct
'kudos/gripes' correspondence within Legacy 7, re: Customer Service.
... I appreciate a job well done and, I do not appreciate a job not well
done.
Ruth Nerud wrote:
Ron - with due respect - I referred to Descendent Book Report in my
original e-mail - bottom of this e-mail and YOU also referred to
Descendent Book Report in one of your e-mails to me - also below - so it
was not left out.
I would be so appreciative if you could tell me
ronald ferguson wrote:
A highly intelligent, senior lecturer in English at my old university was what you would
appear to call spastic. You may care to remember this when thinking of using
the word in such an ignorant, insulting and derogatory fashion.
Ron Ferguson
In the UK it can be
kozar wrote:
Can you please help me with following
Is there a greek version of legacy?
This is from the Legacy web site:
International Versions of Legacy
1. Dansk (Danish) - Released on 28 August 2006.
2. Deutsch (German) - Released on 3 June 2008.
3. Nederlands (Dutch) - Released
M Stowe wrote:
Is someone working on a French version?
Marielle
If you would like to help test
one of our new International versions of Legacy, please Click Here.
( http://www.legacyfamilytree.com/InternationalLegacyVersions.asp )
Try clicking on the link and see.
--
M Stowe wrote:
Merci Gene
Marielle
Vous êtes les bienvenus.
--
Gene Y.
n2kvs
Researching Young, Zies, Harer Cox with
Legacy Family Tree
http://h1.ripway.com/egptech/
Legacy User Group guidelines:
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
Margaret Wilkinson wrote:
''you're the only person who has taken time to write that they miss it!''
Not so Sherry.
I used the 'Suggest a new feature' in Legacy itself to write about this issue
some weeks ago. I did not have a reply.
I used the append multiple sources frequently in Version 6,
Ron Bernier wrote:
Gene,
I could not disagree with you more. No software company, be it Millenia,
Microsoft, or any other company has any obligation to let the customers decide
how the software should be developed. You, me, and all of the other folks who
purchased Legacy purchased the
Michele Lewis wrote:
No, not the tab things. I am having a hard time explaining this. Ok
Let's say I pull up a person and I am looking at their list of sources.
I can highlight a source and hit that copy button on the left hand side
at the bottom and a box will come up that says, Copy
Nancy Burgardt wrote:
Hi,
I'm new here. I bought ver. 5 years ago. Then upgraded to ver. 6 and
later to ver. 7. I want to install this on my laptop. Can I just
install ver 7 or do I need to do ver. 5 6 first?
Just install V7 by itself. It does not need prior versions as it is a
Gene Wheeler wrote:
Gene Y:
Thanks!! That did the trick. It also fixed the non-sticking font
settings. Thanks much!
Gene W.
==
No problem. This was a known problem that was discussed a couple of times previously. It was quite
a while ago, though, and I don't know if the
Gene Wheeler wrote:
I'm using V6 and when I start it up this evening, instead of seeing the
splash screen and then opening in the Family View with the last used
family (as I specified in Customize), it opens the splash screen then
opens up the Set Report Fonts window. When I close this
Sherry/Support wrote:
Syble,
Legacy will not run from a flash drive. It needs to be installed on the hard
drive of the computer you wish to run it from.
You can save the Family Files, pictures, etc on the flash drive and access
them from there.
Thanks for using Legacy.
Sherry
Customer
Bernard Doddema wrote:
I've been trying to preview the interview report and get the following
error:
Run-time error '339':
Component 'MSCOMCTL.OCX' or one of its dependencies not correctly
registered; a file is missing or invalid
Once I click on OK, Legacy shuts down. Is there
[EMAIL PROTECTED] wrote:
Sherry:
Please explain something. If the setting up of a second monitor is
off topic even though Legacy apparently posted a tip on how to do it
(before I joined), then why is this thread on the pros and cons of
Ancestry.com not off topic? Shouldn't it be found
DimJim wrote:
Another nice little feature, but does NOT perform as advertised.
After checking Popup Automatically, it allows you to set the number
of seconds to delay the automatic popup. Doesn't matter whether the
delay is set to 10 seconds or 30 seconds, the popup is almost
immediate, which
JLB wrote:
Isn't a gedcom just a gedcom? There might be some setting in FTM where
it claims precedence to open all ged files but it isn't necessary.
Maybe there's a setting there you can turn off. You can just as well
import it back into Legacy instead.
JL
JLog - simple computer technology
aplebary wrote:
Sorry if this question has been addressed before. Will Legacy and
Pocket PC work on an iphone? I tried to find the answer on Legacy's
website (since they sell Pocket PC) but could not find the answer.
Pocket PC is a device. Pocket Genealogist is the program and it runs on
Pat Jones wrote:
I found the archives. If anyone else is wondering where they are
go to the Legacy Home tab, then click on the Help Center
button, go down the list to Email Lists and just under the
title of the page (Legacy Mailing Lists) is Archives. Click on
that and you can read to your
Can someone check if this is a bug or just a problem on my box.
Go to an individuals assigned sources screen and select Add a New Source
Next select Cancel
Then select Cite a Master Source...
When I do this I always get the message:
Run-time error '3167':
Record is deleted.
When selecting
Jackie King wrote:
Good lord ...
They are not based on what you decide either. Until you are employed by
the folks at legacy you have no more basis than anyone else.
I agree wholeheartedly, however, please delete his messages when responding to him. I kill filed
him so I wouldn't have to
Melody B wrote:
I don't know if this is a bug or not. I have a date for something or
other that is 29 Feb 1894.
To me, that sure looks like a valid date. 1894 should have been a leap
year.
1894/4= 473.5
Not divisible by 4, therefor not a leap year.
--
Gene Y.
n2kvs
Researching Young,
Dave Naylor wrote:
On 11 Jul 2008 Bill wrote:
Dave Naylor Wrote;
If you can come up with program code that will sort records
by date and still keep records with blank dates in their
correct place then you'll make a fortune! ;-))
Cheers, -- Dave
TMG already has this. They have a place to
Jan Roberts wrote:
Looked at the link you provided Robert - deleted the contents of Windows /
Temp. as suggested. No change. Ironically the info page also suggests
updating Legacy!! However, I have done that just via the Legacy Homepage
(not from within Legacy) and it still made no
Jan Roberts wrote:
Hi,
Having successfully updated to 7.0.0.53 (despite still not being able to
access the Home Page via the tab) I can report that there is something weird
with the numbering of the source citations in the Descendant Narrative
Report when created as an rtf file. I have only two
Chick Lewis wrote:
I did search for the answer myself. I looked in the Help files and
read the manual. There was nothing there about error messages. I
didn't think to look on line.
You would be amazed at the number of people who don't think to use the link in the Email. Now you
know its
Elizabeth Cunningham wrote:
I could find no way to fix it, so I eventually deleted
the person and re-entered it correctly, Is there anyway for me to have
just changed the sex?
on the Individual's Information screen, just to the right of the Title Suf. box are three radio
buttons. They
Johnny V wrote:
Has anyone had a Run-time error '9': subscript out of range when
This is a known error and Millenia is working on it.
--
Gene Y.
n2kvs
Researching Young, Zies, Harer Cox with
Legacy Family Tree
http://h1.ripway.com/egptech/
Legacy User Group guidelines:
Dede Holden wrote:
Sherry,
I read the help file to learn how to access this list. The Help file
states The USA County Verification List can be reached from the
message box reporting a questionable county entry in a location field
or by clicking the USA County Verifier button on the Master
Chick Lewis wrote:
I have had several instances where I have clicked on View - Master
List - Source - and got a pop-up that said Run Time Error 3167 Record
is Deleted The Legacy Program then closes. When I reboot Legacy,
everything appears and works normal. What record was deleted ? Any
one
ronald ferguson wrote:
The information can be found by selecting the search item on the top tool bar.
Select the Detailed
Search tab. Choose individual living equal to yes create list. If you then
select print
you may direct the output to the screen, a printer, a CSV file or a PDF file.
Jane Sarles wrote:
Can anyone suggest the correct report to use in order to get a list of
all people in my entire data base that are given as living? There
shouldn't be many.
I can't figure out from the names of the reports.
Jane Sarles
The information can be found by selecting the search
Jane Sarles wrote:
I just meant states that had their counties put in a timeline that
indicates their lineage (if that is the proper word) formed from so and
so county with year, etc.
I am looking particularly for VA NC TN and KY.
I guess, upon reflection, what is want is county timelines for
David Baker wrote:
For anyone that is interested in getting their mapping side done as best as
possible, I wrote a small application have put it on my website at:
http://www.jodael.com/gedtokml.exe
To use it, all you need to do is Export a gedcom file in Legacy 7 format to
your computer,
Art Seddon wrote:
Full name: Hiram Ulysses Simpson Grant, also called 'Unconitional Surrender
Grant.
Actually, Hiram Ulysses Grant, Mother maiden name SIMPSON. The official who nominated him to West
Point erroneously listed his name as Ulysses S. Grant and the academy would not allow him
Jenny M Benson wrote:
Ruth Nerud wrote
http://ssdi.rootsweb.ancestry.com/cgi-bin/ssdi.cgi
which I got by googling rootsweb ssdi
That's not a search string, that is a URL. What the OP was asking for
is the search string to create a Customised Search within Legacy's
Search the Internet
Robert57P via Gmail wrote:
What e-mail programs allow for threads, even if the board does not? Are
any
of them free or cheap? Many people on this list have asked about this
option (at least in part) for this LUG - if a reader on the PC will do
that trick, it could help a lot of us.
Bob
Jane Sarles wrote:
Sorry to pepper the list with questions, but if I don't submit them when
I come across the (during trying to clean up my just imported file) I
will not remember the problems. I do think the day will come (perhaps
when my manual arrives in the mail) when I don't have such
Jane Sarles wrote:
Many of the people in my imported data base have strange characters
after their name in the children view. Some have a +. Some have a
(_). I don't understand this at all. I have tried to change some
things globally, using search and replace, but it doesn't seem to work.
Larry Binenbaum wrote:
Does Legacy save my data input every few minutes, or do I have to do a
manual save of my data input.
Every time your course leaves a field the data just entered in that field is
automatically saved.
--
Gene Y.
n2kvs
Researching Young, Zies, Harer Cox with
Legacy
Rich Heckman wrote:
Dear LUGgies,
I would like to upload my family's genealogy to my personal website.
Using Legacy, I've created my web pages to appear the way I want but only in my
web browser; however, I can't figure out how to take the next step:
How do I upload my genealogy that Legacy
Jane Sarles wrote:
3. In my practice set, I have Helen Holloway dying in Shelbyville,
Shelby County, Kentucky, USA. I have put in the place, but wish to add
the hospital. However, when I click on the plus sign after the place
space, nothing happens - no other screen opens up. How do I
[EMAIL PROTECTED] wrote:
Seems as though each time I review a section of the videos, I wind up having to correct hundreds of records to bring my files into some semblance of standardization. I just ran the 'USA County Verification' and have 27 pages of discrepancies!! The bulk of them have to
Amrit Yegnanarayan wrote:
I purchased the upgrade to LG7 and upgraded. The VE does not work. I get
an error message:
Error creating Virtual Earth map
Error 53: File not found
Would you like to try again
Yes/No/Quit
I have IE7.* on my m/c, but it is not my default browser (FFX3.*
Roxanne wrote:
Is there a workaround for this? I use Firefox exclusively, and when I
attempted to use the mapping feature, I got a popup which stated I had
to have IE7. Yes, I HAVE IE, but since I don't use it, I never update
it. Wondering, too, if this means I can't use Firefox as my default
[EMAIL PROTECTED] wrote:
What is the best way to deal with unknown maiden names?
Using Unknown, or ??? creates a lot of individuals named Unknown
without any hint of who they are connected to.
One idea is to enter ???husb where husb is the husband's surname (as
an identifying reference
]
[mailto:[EMAIL PROTECTED] On Behalf Of Gene Young
Sent: Wednesday, June 18, 2008 4:06 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: [LegacyUG] run-time error '6': overflow
Has anyone else had this error message?
It occurred when I went to edit a source detail that had been entered in
V.6
Has anyone else had this error message?
It occurred when I went to edit a source detail that had been entered in V.6. The Source text is
680 lines of text and I had about 2 lines of text in comments. When selecting edit detail a pop up
box appears with the above error message and upon
101 - 200 of 345 matches
Mail list logo
