Angus Leeming wrote:
> Alfredo Braunstein wrote:
>
>> A bit hacky, though.
>>
>> Would be more straightforward if PosIterator had a vector instead of
>> a stack as internal container, so I could have a InsetOld *
>> PosIterator::inset() method.
>
> This is presumably not for now, but if you wan
1) I can open any citation insets as of the last update. Clicking or
double-clicking only creates the following messages on the console,
but no open inset: "InsetBase: edit left/right"
2) Backspace in a Note inset sometimes deletes two or three spaces.
--
Kayvan A. Sylvan | Proud
Alfredo Braunstein wrote:
> A bit hacky, though.
>
> Would be more straightforward if PosIterator had a vector instead of
> a stack as internal container, so I could have a InsetOld *
> PosIterator::inset() method.
This is presumably not for now, but if you want neat code, why not
define Spellc
On Thu, 6 Nov 2003, Angus Leeming wrote:
> was fairly calm, but the swell outside in
> the North Atlantic proper was 3-4 metres, peak-to-trough.
>
> Would you go wind surfing on the ocean-proper in such conditions? The
> locals would --- and did. Nutters!!!
I'd go if the wind was good... (dry
A bit hacky, though.
Would be more straightforward if PosIterator had a vector instead of a stack
as internal container, so I could have a InsetOld * PosIterator::inset()
method.
Comments?
Alfredo
Index: frontends/controllers/ControlSpellchecker.C
Hello Angus and Developpers of lyx!
Thanks for the help. I am now very deappointed because I tried the patch
and it chenges nothing. So I compiled xfroms 1.0 in a special directory.
So I do not get any more the warning message during ./configure but I
still get the same bug at 'make install' time.
Juergen Spitzmueller wrote:
> Juergen Spitzmueller wrote:
>> > Can you test now if there are no regressions?
>>
>> I have found one regression: LyX spellchecks ERTs
>
> Another thing:
> In 1.3, f&r sets collapsables to their original state after leaving it
> (e.g., if it finds a word in a collaps
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 6. November 2003 20:45, Martin Vermeer wrote:
...
> Oops. Long time no see.
>
> Yes, the default is
>
> height value = 1
> "non-special" height unit = inches
> "special" height unit = \totalheight.
>
> If height_special == none, the non-special
On Thu, Nov 06, 2003 at 06:16:38PM +0100, Kornel Benko spake thusly:
> > If I create a new minipage from default I get:
> > \begin_inset Frameless
> > position "t"
> > hor_pos "c"
> > has_inner_box 1
> > inner_pos "t"
> > use_parbox 0
> > width "100col%"
> > special "none"
> > height "1in"
> > he
On Thu, Nov 06, 2003 at 12:28:23PM +0100, Juergen Spitzmueller spake thusly:
> The only item I have no good solution is the "Has inner box" checkbox. I think
> this is way too esoteric. Unfortunately, I do not understand it either, so I
> don't know how a better ui should look like.
>
> Jürgen
On Thu, Nov 06, 2003 at 06:30:06PM +, Jose' Matos spake thusly:
> On Thursday 06 November 2003 15:33, Martin Vermeer wrote:
> >
> > I am open to (good) suggestions.
> >
> > Attached the latest, in which André's and Jean-Marc's remarks (and
> > some other things) were considered/fixed.
>
>
On Thu, Nov 06, 2003 at 11:52:03AM +0100, Andre Poenitz spake thusly:
> On Thu, Nov 06, 2003 at 11:45:02AM +0100, Lars Gullik Bjønnes wrote:
> > Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
...
> > Is "Element" the right name for these things?
>
> It's a bit too generic for my taste, too.
On Thursday 06 November 2003 15:33, Martin Vermeer wrote:
>
> I am open to (good) suggestions.
>
> Attached the latest, in which André's and Jean-Marc's remarks (and
> some other things) were considered/fixed.
Martin notice that you still have the ascii method in insetelement.[Ch]
Compiling t
[EMAIL PROTECTED] (Lars Gullik Bjønnes) writes:
| But they had Nothern Lights as far south as California... so I am a
| bit surprised that you have none in de.
But you are not Andre...
--
Lgb
Angus Leeming <[EMAIL PROTECTED]> writes:
| This time around, it should be spectacular. The sun has just let off
| the largest ever recorded solar fart and the Aurora Borealis are
| fantastic apparently. Lars is presumably enjoying the show too.
I sleep at night.
(sometimes)
But they had Nothe
Andre Poenitz wrote:
> On Thu, Nov 06, 2003 at 05:47:41PM +, Angus Leeming wrote:
>> I would love to help, but am off to see a long-lost uncle who
>> lives in far-away Orkney to show him the bride ;-)
>
> Are you trying to go by boat again are you will you do something
> safer for a change? R
On Thu, Nov 06, 2003 at 05:47:41PM +, Angus Leeming wrote:
> I would love to help, but am off to see a long-lost uncle who
> lives in far-away Orkney to show him the bride ;-)
Are you trying to go by boat again are you will you do something safer
for a change? Riding on a shark perhaps?
Andr
Andre Poenitz wrote:
>
> See attached. Basic operations on nested text insets work, tables
> and some of the mouse related stuff is defunct but not nearly as bad
> as last time.
>
> Someone willing to help me to fix that mess?
>
> It's probably mostly making sense of the stuff in '#ifdef LOCK'
See attached. Basic operations on nested text insets work, tables and
some of the mouse related stuff is defunct but not nearly as bad as last
time.
Someone willing to help me to fix that mess?
It's probably mostly making sense of the stuff in '#ifdef LOCK' and
replacing it with a 'modern' equiv
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 6. November 2003 18:07, Jose' Matos wrote:
> On Thursday 06 November 2003 16:57, Kornel Benko wrote:
> > > Martin?
> >
> > No, not Martin. It is lyx2lyx, which writes this output.
> > lyxconvert_224.py:166
>
> I now that. :-)
> I just out
On Thursday 06 November 2003 16:57, Kornel Benko wrote:
> >
> > Martin?
>
> No, not Martin. It is lyx2lyx, which writes this output.
> lyxconvert_224.py:166
I now that. :-)
I just output all the arguments with default/null values for compatibility.
If I create a new minipage from de
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 6. November 2003 17:43, Jose' Matos wrote:
> On Thursday 06 November 2003 16:37, Kornel Benko wrote:
> > > Maybe that: [0\totalheight] looks suspicious. Who knows. :-)
> >
> > Yes, it is. But ...
> > 1.) Open with lyx 1.4
> > 2.) Save as
On Thursday 06 November 2003 16:37, Kornel Benko wrote:
> >
> > Maybe that: [0\totalheight] looks suspicious. Who knows. :-)
>
> Yes, it is. But ...
> 1.) Open with lyx 1.4
> 2.) Save as ...
> 3.) edit the lyx-file with say vi
> 4.) remove lines
> - h
Small stuff.
But maybe we're ready now for the next long shot...
Andre'
Index: cursor.C
===
RCS file: /usr/local/lyx/cvsroot/lyx-devel/src/cursor.C,v
retrieving revision 1.14
diff -u -p -r1.14 cursor.C
--- cursor.C6 Nov 2003 11:
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 6. November 2003 17:18, Jose' Matos wrote:
> I would say that the lyx2lyx code is inocent here.
>
> I attach the difference between the code produced by 1.3 and 1.4. That
> looks minimal.
>
> I leave this to latex experts to decide what is th
On Thursday 06 November 2003 15:53, Kornel Benko wrote:
> >
> > Should be fixed now, please test. :-)
>
> Perfect.
> This one is gone, but there are others. The minipage in the next example
> will be mangled into the text above. (In the dvi-output of 1.4)
I would say that the lyx2lyx code is
On Thu, Nov 06, 2003 at 01:41:13PM +0100, Andre Poenitz wrote:
> I don't know, I think either is ok. I'd probably use 'allowSpellCheck'
> as this indicates exactly its single purpose and we'd separate two
> ideas ('language is unknown', 'dont spellcheck') cleanly.
Please don't call it unknown tho
On Thu, Nov 06, 2003 at 11:50:33AM +0100, Andre Poenitz wrote:
> Maybe we could move Marginal Note and even Foot Note to the 'Note'
> submenu to free two letters for shortcuts?
Tried that once already, was argued out of it by Michael S and others.
regards
john
--
Khendon's Law:
If the same poi
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 6. November 2003 15:50, Jose' Matos wrote:
> On Thursday 06 November 2003 11:30, Kornel Benko wrote:
> > The attached is perfectly correct lyx-file, created with the 1.3.4cvs
> > Version.
> >
> >1.) Opened with the 1.4-version -> looks already
On Thu, Nov 06, 2003 at 05:49:13PM +0200, Martin Vermeer wrote:
> On Thu, Nov 06, 2003 at 04:28:39PM +0100, Andre Poenitz spake thusly:
> >
> > On Thu, Nov 06, 2003 at 05:33:25PM +0200, Martin Vermeer wrote:
> > > Attached the latest, in which André's and Jean-Marc's remarks (and
> > > some other
On Thu, Nov 06, 2003 at 04:28:39PM +0100, Andre Poenitz spake thusly:
>
> On Thu, Nov 06, 2003 at 05:33:25PM +0200, Martin Vermeer wrote:
> > Attached the latest, in which André's and Jean-Marc's remarks (and
> > some other things) were considered/fixed.
>
> Better now, but note that ws is still
On Thu, Nov 06, 2003 at 05:33:25PM +0200, Martin Vermeer wrote:
> Attached the latest, in which André's and Jean-Marc's remarks (and
> some other things) were considered/fixed.
Better now, but note that ws is still off in the src/LaTeXFeatures.C
chunk.
What editor are you using?
Andre'
--
Thos
Martin Vermeer <[EMAIL PROTECTED]> writes:
| On Thu, Nov 06, 2003 at 11:45:02AM +0100, Lars Gullik Bjønnes spake thusly:
>>
>> Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
>
| ...
|
>> | Element Filename
>> | ...
>> | End
>
| Done.
|
>> Is "Element" the right name for these things?
>
| Go
On Thursday 06 November 2003 15:13, Andre Poenitz wrote:
>
> Sorry. I did not read that thread...
Oh yes, you did. That is the one we are using. :-)
> So why are you asking? ;-)
Honestly to see if there are cases that I am missing and if the solution I
proposed is incomplete, or in the wors
On Thu, Nov 06, 2003 at 11:45:02AM +0100, Lars Gullik Bjønnes spake thusly:
>
> Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
...
> | Element Filename
> | ...
> | End
Done.
> Is "Element" the right name for these things?
Good question.
For XML it certainly is.
I am also a little unhapp
On Thu, Nov 06, 2003 at 03:07:18PM +, Jose' Matos wrote:
> On Thursday 06 November 2003 14:57, Andre Poenitz wrote:
> >
> > No. A 'pagebreak above' should be translated into a pagebreak inset as
> > first 'character' in the paragraph, and a 'pagebreak below' to one at
> > the end.
>
> No, it
On Thursday 06 November 2003 14:57, Andre Poenitz wrote:
>
> No. A 'pagebreak above' should be translated into a pagebreak inset as
> first 'character' in the paragraph, and a 'pagebreak below' to one at
> the end.
No, it should not. Or else perfectly valid files before will give errors
now. Th
On Thu, Nov 06, 2003 at 02:50:18PM +, Jose' Matos wrote:
> On Thursday 06 November 2003 11:30, Kornel Benko wrote:
> > The attached is perfectly correct lyx-file, created with the
> > 1.3.4cvs Version.
>
> >1.) Opened with the 1.4-version -> looks already weird. 2.)
> >View->DVI ->La
> "Andre" == Andre Poenitz <[EMAIL PROTECTED]> writes:
Andre> Jean-Marc,
Andre> please consider putting this into 1.3.4cvs.
I just did it. Thanks.
JMarc
On Thursday 06 November 2003 11:30, Kornel Benko wrote:
> The attached is perfectly correct lyx-file, created with the 1.3.4cvs
> Version.
>1.) Opened with the 1.4-version -> looks already weird.
>2.) View->DVI ->LaTeX errors
Should be fixed now, please test. :-)
> Kornel
On Thursday 06 November 2003 11:30, Kornel Benko wrote:
> The attached is perfectly correct lyx-file, created with the 1.3.4cvs
> Version.
>
>1.) Opened with the 1.4-version -> looks already weird.
>2.) View->DVI ->LaTeX errors
>
> Kornel
Thanks Kornel, I noticed the problem today
> "Andre" == Andre Poenitz <[EMAIL PROTECTED]> writes:
>> I thought LaTeX2e had some extensions for height...
Yes it does. See section 3.5 of usrguide.dvi.
Andre> I don't know, but it's hard to imagine. Where does the text go
Andre> that does not fit into the width x height area?
The intere
Andre Poenitz wrote:
> I don't know, I think either is ok. I'd probably use 'allowSpellCheck'
> as this indicates exactly its single purpose and we'd separate two
> ideas ('language is unknown', 'dont spellcheck') cleanly.
I'll do that then.
Regards, Alfredo
Andre Poenitz wrote:
> What's the LaTeX equivalent?
\begin{minipage}[][][]{}
...
\end{minipage}
see usrguide, p. 15
Jürgen
On Thu, Nov 06, 2003 at 01:32:54PM +0100, Alfredo Braunstein wrote:
> Shouldn't we have a language "ignore" or "unknown"?
> I think this is a must in a lot of situations.
Why not.
> Incidentally, we could then put ERT text automatically in that
> language and automatically solve the spellcheck-er
Juergen Spitzmueller wrote:
> > Can you test now if there are no regressions?
>
> I have found one regression: LyX spellchecks ERTs
Another thing:
In 1.3, f&r sets collapsables to their original state after leaving it (e.g.,
if it finds a word in a collapsed footnote, the footnote will be collap
Shouldn't we have a language "ignore" or "unknown"?
I think this is a must in a lot of situations.
Incidentally, we could then put ERT text automatically in that language and
automatically solve the spellcheck-ert problem.
Of course, alternatively, I can reintroduce the bool
InsetOld::allowSpellCh
On Thu, Nov 06, 2003 at 12:54:42PM +0100, Juergen Spitzmueller wrote:
> Alfredo Braunstein wrote:
> > > Of course. Just keep it in mind please. IMHO spellchecking really needs
> > > some overhaul. The fact that it uncollapses collapsables literally keeps
> > > me from spellchecking my documents if
Juergen Spitzmueller wrote:
> Alfredo Braunstein wrote:
>> > Of course. Just keep it in mind please. IMHO spellchecking really needs
>> > some overhaul. The fact that it uncollapses collapsables literally
>> > keeps me from spellchecking my documents if not absolutely necessary.
>>
>> Can you test
Alfredo Braunstein wrote:
> > Of course. Just keep it in mind please. IMHO spellchecking really needs
> > some overhaul. The fact that it uncollapses collapsables literally keeps
> > me from spellchecking my documents if not absolutely necessary.
>
> Can you test now if there are no regressions?
I
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 6. November 2003 13:01, Alfredo Braunstein wrote:
> Kornel Benko wrote:
> > The attached is perfectly correct lyx-file, created with the 1.3.4cvs
> > Version.
> >
> >1.) Opened with the 1.4-version -> looks already weird.
> >2.) View->DVI
Kornel Benko wrote:
> The attached is perfectly correct lyx-file, created with the 1.3.4cvs
> Version.
>
>1.) Opened with the 1.4-version -> looks already weird.
>2.) View->DVI ->LaTeX errors
Hi Kornel,
The only error I get is a missing "preamble.tex"
PS: but ideed it looks strange: t
On Thu, Nov 06, 2003 at 12:52:41PM +0100, Lars Gullik Bjønnes wrote:
> Andre Poenitz <[EMAIL PROTECTED]> writes:
>
> | On Thu, Nov 06, 2003 at 11:47:27AM +0100, Lars Gullik Bjønnes wrote:
> >> Andre Poenitz <[EMAIL PROTECTED]> writes:
> >>
> >> | There should be some short cut to access the sub m
Andre Poenitz <[EMAIL PROTECTED]> writes:
| On Thu, Nov 06, 2003 at 11:47:27AM +0100, Lars Gullik Bjønnes wrote:
>> Andre Poenitz <[EMAIL PROTECTED]> writes:
>>
>> | There should be some short cut to access the sub menu.
>> >
>> | I don't think it is sensible to have the possibility to enter a fi
Andre Poenitz wrote:
> Tooltips for the parbox/minipage choice would be nice (i.e. what's the
> difference...)
I have been thinking about how to lay out the dialog for qt. I think that it
is possible to make the dialog a bit more understandable (e.g. tell the user
what the different "placement o
Kornel Benko wrote:
> Wow. Thanks.
> Unfortunately, both errors have gone, therefore no more reports :)
> I have to end this thread.
Such a pity. ;-)
> Now, there is new error, related maybe to lyx2lyx ... I am trying to
> provide a minimal lyx-file in a new thread.
>
> Your last provided patc
-BEGIN PGP SIGNED MESSAGE-
The attached is perfectly correct lyx-file, created with the 1.3.4cvs Version.
1.) Opened with the 1.4-version -> looks already weird.
2.) View->DVI ->LaTeX errors
Kornel
- --
Kornel Benko
[EMAIL PROTECTED]
-BEGIN PGP SIGNATURE-
Versi
Lars Gullik BjÃnnes wrote:
> Alfredo Braunstein <[EMAIL PROTECTED]> writes:
>
> | inside floats etc.
> | Works ok for .lyx bad tokens.
> | For some reason, latex errors are still filed (and then placed) under
> | top-paragraphs.
>
> sure, if it is better than what we have now -> shove it in.
Y
On Thu, Nov 06, 2003 at 12:22:14PM +0100, Alfredo Braunstein wrote:
> Andre Poenitz wrote:
>
> >> - trying to insert an inset, inside an inset, inside an inset exits the
> >> second one and does nothing.
> >
> > That's strange as current CVS uses the old dispatch route...
>
> Better stated: put
Andre Poenitz wrote:
>> - trying to insert an inset, inside an inset, inside an inset exits the
>> second one and does nothing.
>
> That's strange as current CVS uses the old dispatch route...
Better stated: put a text-inset inside another text-inset and put the cursor
there.
Then almost every e
Alfredo Braunstein <[EMAIL PROTECTED]> writes:
| inside floats etc.
| Works ok for .lyx bad tokens.
| For some reason, latex errors are still filed (and then placed) under
| top-paragraphs.
sure, if it is better than what we have now -> shove it in.
--
Lgb
Andre Poenitz <[EMAIL PROTECTED]> writes:
| Goal is to have the global cursor in sync with inset locking...
[no patch]
--
Lgb
Andre Poenitz wrote:
> It should. Move into a footnote and back again...
Ah yes.
Alfredo
On Thu, Nov 06, 2003 at 11:47:27AM +0100, Lars Gullik Bjønnes wrote:
> Andre Poenitz <[EMAIL PROTECTED]> writes:
>
> | There should be some short cut to access the sub menu.
> >
> | I don't think it is sensible to have the possibility to enter a fixed
> | height of a minipage.
>
> Why not?
What'
-BEGIN PGP SIGNED MESSAGE-
On Mittwoch, 5. November 2003 22:29, Alfredo Braunstein wrote:
> Hi Kornel,
>
> Kornel Benko wrote:
> > I have one more. While searching for undo I found, that
> > deleting Title in this file crashes lyx too.
> >
> > 1.) Open file
> > 2.) Move cursor to title-sta
On Thu, Nov 06, 2003 at 11:54:00AM +0100, Alfredo Braunstein wrote:
> Andre Poenitz wrote:
>
> > Goal is to have the global cursor in sync with inset locking...
>
> It doesn't seem to get triggered...
It should. Move into a footnote and back again...
Andre'
--
Those who desire to give up Free
Andre Poenitz <[EMAIL PROTECTED]> writes:
| There should be some short cut to access the sub menu.
>
| I don't think it is sensible to have the possibility to enter a fixed
| height of a minipage.
Why not?
--
Lgb
Andre Poenitz wrote:
> Goal is to have the global cursor in sync with inset locking...
It doesn't seem to get triggered...
Alfredo
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
>> "Andre" == Andre Poenitz <[EMAIL PROTECTED]> writes:
>
| Andre> There should be some short cut to access the sub menu.
>
| Actually, I think the submenu should be removed. I do not think that
| people need different kind of boxen often enough
On Thu, Nov 06, 2003 at 11:45:02AM +0100, Lars Gullik Bjønnes wrote:
> Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
>
> >> "Martin" == Martin Vermeer <[EMAIL PROTECTED]> writes:
> >
> | Martin> I think this is about as good as it gets. I plan to commit
> | Martin> this evening, speak out n
On Thu, Nov 06, 2003 at 11:42:47AM +0100, Jean-Marc Lasgouttes wrote:
> > "Andre" == Andre Poenitz <[EMAIL PROTECTED]> writes:
>
> Andre> There should be some short cut to access the sub menu.
>
> Actually, I think the submenu should be removed. I do not think that
> people need different kin
Jean-Marc Lasgouttes <[EMAIL PROTECTED]> writes:
>> "Martin" == Martin Vermeer <[EMAIL PROTECTED]> writes:
>
| Martin> I think this is about as good as it gets. I plan to commit
| Martin> this evening, speak out now or forever hold your peace ;-)
>
| Small details:
>
| +Element
| + Name
> "Andre" == Andre Poenitz <[EMAIL PROTECTED]> writes:
Andre> There should be some short cut to access the sub menu.
Actually, I think the submenu should be removed. I do not think that
people need different kind of boxen often enough to warrant a submenu.
An Insert>Box... menu entry should b
> "Martin" == Martin Vermeer <[EMAIL PROTECTED]> writes:
Martin> I think this is about as good as it gets. I plan to commit
Martin> this evening, speak out now or forever hold your peace ;-)
Small details:
+Element
+ NameFilename
+ LatexType Command
+ Late
There should be some short cut to access the sub menu.
I don't think it is sensible to have the possibility to enter a fixed
height of a minipage.
Tooltips for the parbox/minipage choice would be nice (i.e. what's the
difference...)
Andre'
--
Those who desire to give up Freedom in order to ga
Goal is to have the global cursor in sync with inset locking...
Andre'
--
Those who desire to give up Freedom in order to gain Security, will not have,
nor do they deserve, either one. (T. Jefferson or B. Franklin or both...)
inside floats etc.
Works ok for .lyx bad tokens.
For some reason, latex errors are still filed (and then placed) under
top-paragraphs.
If someone wants to have a look at that... (Jose'?). Should be easy to fix
if one knows where ;-)
Alfredo
Index: paragraph_funcs.C
===
On Thu, Nov 06, 2003 at 11:52:11AM +0200, Martin Vermeer wrote:
> On Wed, Nov 05, 2003 at 04:13:23PM +, Jose' Matos spake thusly:
> >
> > On Wednesday 05 November 2003 15:29, Martin Vermeer wrote:
> > >
> > > > Better even, what if I check this in now?
> > >
> > > Comments... please?
> >
> >
On Wed, Nov 05, 2003 at 04:13:23PM +, Jose' Matos spake thusly:
>
> On Wednesday 05 November 2003 15:29, Martin Vermeer wrote:
> >
> > > Better even, what if I check this in now?
> >
> > Comments... please?
>
> What are the differences between your and André's proposal?
The attached comes
On Thu, Nov 06, 2003 at 09:54:44AM +0100, Alfredo Braunstein wrote:
> With one user.
>
> comments?
Fine with me. [Also the finxing of the comment...]
Andre'
--
Those who desire to give up Freedom in order to gain Security, will not have,
nor do they deserve, either one. (T. Jefferson or B
> "Angus" == Angus Leeming <[EMAIL PROTECTED]> writes:
>> /miro/local/potato/lyx-1.3.3-1/share/lyx/xfonts/PSres.upr make[3]:
Angus> This is a known bug. Try the attached patch.
Your patch needs to re-run automake.
I guess using make -k would work too...
JMarc
> "Angus" == Angus Leeming <[EMAIL PROTECTED]> writes:
>> I can do that too, but I cannot see cases where the test will
>> fail. Is -ne 100% portable?
Angus> Shrug. That I cannot answer. It is in my O'Reilly book and
Angus> works on both the linux and tru64 machines I have access to...
The
With one user.
comments?
Alfredo
Index: iterators.C
===
RCS file: /usr/local/lyx/cvsroot/lyx-devel/src/iterators.C,v
retrieving revision 1.28
diff -u -p -u -r1.28 iterators.C
--- iterators.C 5 Nov 2003 11:17:11 - 1.28
+++ iterato
83 matches
Mail list logo
