Well despite curts objections I went to lowes and compared the husky
side by side with that poulan 20. visual inspection the 20 was much
more heavy duty than the 18 I first had. It also seems very similar to
the Husky so I bought the Poulan. i will give it a go and see what happens.
On 8/12/
Buy this at Lowes and be done with it.
http://www.husqvarna.com/us/products/chainsaws/455-rancher/
Go to a saw shop and get a real chain (or Baileys). That lawyer mandated,
estrogen induced, feminized, metro-sexual, low kickback chain won't cut butter.
You want to hang drapes, or cut wood?
Ri
Curt Raymond wrote:
My Husky has an interesting system where the choke is linked to the throttle.
Start the saw with the choke on and it goes right to high idle, blip the
throttle and it settles down.
I had the carb out last year as the fuel hoses had softened and were collapsing
under vacuum
I had the 42cc or whatever 18" and thinking about the 50cc 20", seems like a
better saw, but curt says husky.
Sent from my iPhone
On Aug 12, 2013, at 8:16 PM, Mitch Haley wrote:
>
> So you've got a Poulan Pro 40cc and you're thinking about a PP 50cc?
> I'm don't know much about the 40cc, but
Curt Raymond wrote:
Wikipedia says Husky bought Poulan but Husky and Jonsered are both owned by Electrolux.
Then Wiki is outdated.
I don't remember details, but the Electrolux thing changed a few years ago.
I think the Outdoor Power Equipment lines got spun off into their own company
about tim
So you've got a Poulan Pro 40cc and you're thinking about a PP 50cc?
I'm don't know much about the 40cc, but generally the PPs have been decent
homeowner saws. The 50cc actually seem to have a bit of a following.
I thought you'd bought a $99 Poulan, like a Woodshark.
http://www.arboristsite.co
Kaleb C. Striplin wrote:
I thought about that, and I am sure they will, I would be willing to pay
extra for a better saw. I thought these were made by Husquvarna though?
I think the Woodshark and Wild Thing are pretty similar to the bottom end
Huskies like the 235/240. But the Huskies might h
ld when it was new anyway. Thats why you buy from a saw shop as
Mitch and I have been saying.
Put a half ounce of seafoam gas additive in it and run a tank through and see
how it goes.
-Curt
Date: Mon, 12 Aug 2013 20:33:02 -0400
From: Rich Thomas
To: Mercedes Discussion List
Subject: Re: [MBZ] I f
Dieselhead wrote:
I don't know that for sure, so I defer to Mitch's expertise. I can't
say that I ever flooded one, but the rental Huskq... concrete saws that
would not run, they said were flooded after we took them back. But those
have a choke, so I think maybe I got the different types mixe
45 does everything I need.
-Curt
Date: Mon, 12 Aug 2013 19:25:00 -0500
From: "Kaleb C. Striplin"
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
Message-ID:
Content-Type: text/plain; charset=us-ascii
Ok Maybe I will swing for that one, but I still don
t; catalyst. This one doesn't or it doesn't that I've found anyway and I've had
> the exhaust apart several times.
>
> -Curt
>
> Date: Mon, 12 Aug 2013 17:50:30 -0500
> From: Dieselhead <126die...@gmail.com>
> To: Mercedes Discussion List
> Subject:
be ahead on money if
>> you'd just bought a good saw from a real saw shop in the first place.
>>
>> My Husky is a mid-line Ford, your Poulin is a Yugo...
>>
>> -Curt
>>
>> Date: Mon, 12 Aug 2013 17:15:40 -0500
>> From: "Kaleb C. Striplin&quo
t smoke at all. Mitch had mentioned most saws having a catalyst. This one
doesn't or it doesn't that I've found anyway and I've had the exhaust apart
several times.
-Curt
Date: Mon, 12 Aug 2013 17:50:30 -0500
From: Dieselhead <126die...@gmail.com>
To: Mercedes Discussion L
On Mon, 12 Aug 2013 17:22:06 -0700 (PDT) Curt Raymond
wrote:
> 25-30 years ago Poulan made good saws. I borrowed one when I first
> moved into the house, 20" bar, big profile chain, lots of power. Poulan
> is now all Wal-Mart quality.
That's too bad. The Poulan we have I bought in 1981, 32 years
15:40 -0500
> From: "Kaleb C. Striplin"
> To: Mercedes Discussion List
> Subject: Re: [MBZ] I fought the saw and the saw won
> Message-ID: <52095e8c.40...@striplin.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Husky owns Poulan. So,
ted on that cheap saw. You'd be ahead on money if
> you'd just bought a good saw from a real saw shop in the first place.
>
> My Husky is a mid-line Ford, your Poulin is a Yugo...
>
> -Curt
>
> Date: Mon, 12 Aug 2013 17:15:40 -0500
> From: "Kaleb C. Strip
Subject: Re: [MBZ] I fought the saw and the saw won
Message-ID:
Content-Type: text/plain; charset="us-ascii" ; format="flowed"
Mine that start are poulan pro
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/arc
"Kaleb C. Striplin"
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
Message-ID: <52095e8c.40...@striplin.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Husky owns Poulan. So, doing some looking on lowes website, and
no more than I wi
Well I took the new one back and go a gift card. They did not have the 20" so I
will pick one when I am in Tulsa tomorrow at a different lowes that show then
in stock online.
Sent from my iPhone
On Aug 12, 2013, at 6:22 PM, Dieselhead <126die...@gmail.com> wrote:
>> From what I have read the b
Taiwan is the best Asian place to buy bicycle parts from. Some of the
best rims and frames are made there, both carbon and aluminum.
Luther KB5QHUForest Park, IL
'98 ML320 "Max" (169,xxx mi)
On 8/7/2013 5:53 PM, Gary Hurst wrote:
i still like bicycles and advise anyone looking for a bic
odel from a saw shop will give a lot more satisfaction and have
> much better support. According to Kaleb the price difference isn't all that
> much either.
>
> -Curt
>
> Date: Mon, 12 Aug 2013 16:26:46 -0500
> From: Randy Bennell
> To: Mercedes Discussion List
>
From what I have read the bigger 20" may be more Husky than Poulan,
if it makes a different. I am thinking about doing the sway when I
head back to town shortly
I have to say that to me the 18" is more usable than the 20" saw.
But then I like small saws. My all time favorite is the 16"
home
It seems to me you have a variable definition for "flooded".
To me flooded means theres more gas available than can be handled by
the spark plug. A wet spark plug produces considerably less spark
than a dry one so theres no starting.
It seems you start by using "flooded" to mean "primed" but t
Kaleb,
I hope the new saw (Poulan or other) works out. I urge you to use only
fresh gas (to avoid gumming up the carb) and keep the mix mixed (for
longevity). As far as I know, all these 2-cycle carbs are similar (and
fundamentally different from 4-cycle carbs) and bad fuel can harm any of
them
From what I have read the bigger 20" may be more Husky than
Poulan, if it makes a different. I am thinking about doing the
sway when I head back to town shortly
On 8/12/2013 5:36 PM, Dieselhead wrote:
Mine that start are poulan pro
Husky owns Poulan. So, doing some looking on lowes website
Mine that start are poulan pro
Husky owns Poulan. So, doing some looking on lowes website, and no
more than I will use the thing, I can't really justify spending an
extra $100 or more to get the same size 18" husky. Looking at the
reviews it seems these can also suffer the hard start. What
have much better
support. According to Kaleb the price difference isn't all that much either.
-Curt
Date: Mon, 12 Aug 2013 16:26:46 -0500
From: Randy Bennell
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
Message-ID: <52095316.1000...@bennell.ca>
Content-
rt
Date: Mon, 12 Aug 2013 14:35:05 -0500
From: Dieselhead <126die...@gmail.com>
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
Message-ID:
Content-Type: text/plain; charset="us-ascii" ; format="flowed"
Does it have the primer bulb an
Kaleb,
I hope the new saw (Poulan or other) works out. I urge you to use only
fresh gas (to avoid gumming up the carb) and keep the mix mixed (for
longevity). As far as I know, all these 2-cycle carbs are similar (and
fundamentally different from 4-cycle carbs) and bad fuel can harm any of
the
Husky owns Poulan. So, doing some looking on lowes website, and
no more than I will use the thing, I can't really justify spending
an extra $100 or more to get the same size 18" husky. Looking at
the reviews it seems these can also suffer the hard start. What I
am thinking about though is ta
I have no idea about that but I bought a Husquvarna a couple of years
back and so far am happy with it.
Randy
On 12/08/2013 3:51 PM, Kaleb C. Striplin wrote:
I thought about that, and I am sure they will, I would be willing to
pay extra for a better saw. I thought these were made by Husquvarn
I thought about that, and I am sure they will, I would be willing
to pay extra for a better saw. I thought these were made by
Husquvarna though?
On 8/12/2013 2:45 PM, Randy Bennell wrote:
Quick - before you put fuel in it etc. - take it back and see if
they will swap you for a Husquvarna.
Yes, it has a bulb and a choke.
On 8/12/2013 2:35 PM, Dieselhead wrote:
Ok so as I was loading it up to take it to lowes I decided to
pull the rope. No prime, no choke no nothing it start and ran
great on the first pull. Nice and responsive etc. turned it
off, tried to start it again, would no
Well they just swaped it out but I have not opened it yet or
anything. I thought about seeing if there was a different brand
up there that would be better.
On 8/12/2013 2:34 PM, Rich Thomas wrote:
You should be able to get store credit on returns too if you
want to buy another kind or use the
On 12/08/2013 2:35 PM, Dieselhead wrote:
Ok so as I was loading it up to take it to lowes I decided to pull
the rope. No prime, no choke no nothing it start and ran great on the
first pull. Nice and responsive etc. turned it off, tried to start it
again, would not start. Took it back to lowes a
Quick - before you put fuel in it etc. - take it back and see if they
will swap you for a Husquvarna.
Will cost a bit more but you will be happier in the long run.
Randy
On 12/08/2013 2:12 PM, Kaleb C. Striplin wrote:
Ok so as I was loading it up to take it to lowes I decided to pull the ro
Ok so as I was loading it up to take it to lowes I decided to pull
the rope. No prime, no choke no nothing it start and ran great on
the first pull. Nice and responsive etc. turned it off, tried to
start it again, would not start. Took it back to lowes and I will be
damned if they did not swap
You should be able to get store credit on returns too if you want to buy
another kind or use the credit to buy other stuff.
--R
On 8/12/13 3:12 PM, Kaleb C. Striplin wrote:
Ok so as I was loading it up to take it to lowes I decided to pull the rope. No
prime, no choke no nothing it start and
Makes starting the old sled a breeze, especially the
really old ones where the tank is under the engine.
-Curt
Date: Mon, 12 Aug 2013 12:57:31 -0400
From: Mitch Haley
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
Message-ID: <520913fb.5030...@voyager.net>
C
On Mon, 12 Aug 2013 14:12:24 -0500 "Kaleb C. Striplin"
wrote:
> Ok so as I was loading it up to take it to lowes I decided to pull the
> rope. No prime, no choke no nothing it start and ran great on the first
> pull. Nice and responsive etc. turned it off, tried to start it again,
> would not sta
Ok so as I was loading it up to take it to lowes I decided to pull the rope. No
prime, no choke no nothing it start and ran great on the first pull. Nice and
responsive etc. turned it off, tried to start it again, would not start. Took
it back to lowes and I will be damned if they did not swap i
So after calling about 5 different places listed on the poulan site none of
them wanted to mess with it, said they do not do warranty work. I called lowes
and the guy said he was 95% sure they would exchange it if I brought it down
there. I may try that just to see what happens. Long story short
On Aug 12, 2013 11:13 AM, "Dieselhead" <126die...@gmail.com> wrote:
>>
>> I think EPA made chokes disappear.
My Husky 445 saw that I bought in 2010 or so and the 3xx-something trimmer
that I bought a week ago both have manual chokes.
Alex
___
http://www.okiebe
Kaleb C. Striplin wrote:
Ok I just wondered if maybe pumping it too much was flooding it.
I don't think so.
Loren does.
If you went here, you'd get the definitive answer:
http://arboristsite.com/chainsaw/
__
I don't know that for sure, so I defer to Mitch's expertise. I can't
say
And run out all over the place.
Wilton
- Original Message -
From: "Dieselhead" <126die...@gmail.com>
To: "Mercedes Discussion List"
Sent: Monday, August 12, 2013 12:17 PM
Subject: Re: [MBZ] I fought the saw and the saw won
>If you pump it too much w
Kaleb C. Striplin wrote:
Ok I just wondered if maybe pumping it too much was flooding it.
I don't think so.
Loren does.
If you went here, you'd get the definitive answer:
http://arboristsite.com/chainsaw/
___
http://www.okiebenz.com
To search list archives
Ok I just wondered if maybe pumping it too much was flooding it.
Sent from my iPhone
On Aug 12, 2013, at 11:18 AM, Mitch Haley wrote:
> Kaleb C. Striplin wrote:
>> If you pump it too much will it flood the carb?
>
> I don't see how.
> If the bulb fills with fuel, that pretty much tells you the
If you pump it too much will it flood the carb?
Sent from my iPhone
It is 'sposed ta. If it is working right, it will flood the carb.
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
To Unsubscribe or change delivery op
Kaleb C. Striplin wrote:
If you pump it too much will it flood the carb?
I don't see how.
If the bulb fills with fuel, that pretty much tells you the fuel filter and carb
inlet screen are OK, but there could be other things wrong with the carb.
Mitch.
__
If you pump it too much will it flood the carb?
Sent from my iPhone
On Aug 12, 2013, at 10:33 AM, Randy Bennell wrote:
> On 09/08/2013 7:25 PM, Mitch Haley wrote:
>> Kaleb C. Striplin wrote:
>>> Yes it's new. It does have a primer bulb, it says pump it 6 times warm or
>>> cold to start. I have
On 10/08/2013 6:20 AM, Hans Neureiter wrote:
On my tiller the choke does not seal when closed. Starts only when I squirt
some gas in the intake.
Have you looked to see if it is possible to adjust something so that the
choke plate will close?
I have a similar problem with a couple of small eng
Randy Bennell wrote:
Sounds to me, more like the primer is not sucking the gas up and feeding
it to the carb. If it was, one would think there would be an issue of
flooding rather than a dry spark plug.
The primer sucks the air out of the carb. When there's no air in the carb the
primer bulb
On 09/08/2013 7:27 PM, Craig wrote:
On Fri, 9 Aug 2013 19:05:39 -0400 "WILTON" wrote:
As I was falling and jumping backward off the ladder, I threw the saw
way off the right at about 2 o'clock. As I was getting up, I realized
that the saw was lying across the yard idling perfectly, and contin
On 09/08/2013 7:25 PM, Mitch Haley wrote:
Kaleb C. Striplin wrote:
Yes it's new. It does have a primer bulb, it says pump it 6 times
warm or cold to start. I have tried pumping it 6 times, 20 times, no
times make no difference when it gets to not wanting to start
The primer bulb sucks from a
+1 for Where's the Diesel chain saws?
Well, the Unimog that the US Army's SEE is based upon
has some attachments, and one is (IIRC) a hydraulic-powered
chain saw that hooks to the Mog. Which is diesel, so there
you go. Gotta be a drag with a couple of hoses running
behind you, though.
-- Jim
>> -Original Message-
>> From: Mercedes
>> [mailto:mercedes-bounces@**okiebenz.com]
>> On Behalf Of Kaleb C.
>> Striplin
>> Sent: Friday, August 09, 2013 3:08 PM
>> To: Mercedes Discussion List
>> Subject: Re: [MBZ] I fought the saw and the saw won
>
On Fri, 9 Aug 2013 19:05:39 -0400 "WILTON" wrote:
> As I was falling and jumping backward off the ladder, I threw the saw
> way off the right at about 2 o'clock. As I was getting up, I realized
> that the saw was lying across the yard idling perfectly, and continued
> to do so henceforth. What
Kaleb C. Striplin wrote:
Yes it's new. It does have a primer bulb, it says pump it 6 times warm or cold
to start. I have tried pumping it 6 times, 20 times, no times make no
difference when it gets to not wanting to start
The primer bulb sucks from a carb vent and pumps back to the tank.
If i
] On Behalf Of Kaleb C.
Striplin
Sent: Friday, August 09, 2013 6:39 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
I was getting a nice blue spark when I did that
On 8/9/2013 3:29 PM, G Mann wrote:
> I've had some success with 2 stroke engines with fouled
aw was lying across the yard idling perfectly, and
continued to do so henceforth. What it needed was a good throwing/tossing
across the yard.
Wilton
- Original Message -
From: "Kaleb C. Striplin"
To: "Mercedes Discussion List"
Sent: Friday, August 09, 2013 6:37 PM
S
I was getting a nice blue spark when I did that
On 8/9/2013 3:29 PM, G Mann wrote:
I've had some success with 2 stroke engines with fouled plugs by spraying
the plug with brake cleaner to flush off the oil/carbon..
Then with the plug out and hooked up lay it in contact with the cylinder
head an
drained (or boiled off) it
will not start without choke.
-Original Message-
From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Kaleb C.
Striplin
Sent: Friday, August 09, 2013 3:08 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
I did
I've had some success with 2 stroke engines with fouled plugs by spraying
the plug with brake cleaner to flush off the oil/carbon..
Then with the plug out and hooked up lay it in contact with the cylinder
head and pull the engine through and watch the spark.. Good hot blue
spark.. likely plug is g
[mailto:mercedes-boun...@okiebenz.com] On Behalf Of Kaleb C.
Striplin
Sent: Friday, August 09, 2013 3:08 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
I did, plug was dry, I was getting spark when cranked.
Sent from my iPhone
On Aug 9, 2013, at 2:05 PM
On 09/08/2013 2:19 PM, Kaleb C. Striplin wrote:
Yes it's new. It does have a primer bulb, it says pump it 6 times warm or cold
to start. I have tried pumping it 6 times, 20 times, no times make no
difference when it gets to not wanting to start
Now we are getting somewhere.
There is a proble
Yes it's new. It does have a primer bulb, it says pump it 6 times warm or cold
to start. I have tried pumping it 6 times, 20 times, no times make no
difference when it gets to not wanting to start
Sent from my iPhone
On Aug 9, 2013, at 2:17 PM, Randy Bennell wrote:
> On 09/08/2013 2:08 PM, Ka
On 09/08/2013 2:08 PM, Kaleb C. Striplin wrote:
I did, plug was dry, I was getting spark when cranked.
Sent from my iPhone
Ok, so we know it is starving for fuel.
Now the question is why?
Fuel pickup in the tank and hose to carb.
Carb is probably also acting as the fuel pump via a diaphram e
I did, plug was dry, I was getting spark when cranked.
Sent from my iPhone
On Aug 9, 2013, at 2:05 PM, Randy Bennell wrote:
> Pull the plug when that happens again and see if it is wet or dry and check
> to see if there is spark.
>
> Got to be either flooded, not getting fuel, or not getting
Pull the plug when that happens again and see if it is wet or dry and
check to see if there is spark.
Got to be either flooded, not getting fuel, or not getting spark.
Randy
On 08/08/2013 6:33 PM, Kaleb C. Striplin wrote:
Oh yea I pulled the cover and squirted a short squirt of either in the
-boun...@okiebenz.com] On Behalf Of Kaleb C.
Striplin
Sent: Thursday, August 08, 2013 7:33 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
I got the darn thing started today fished what I needed to clear to close
the gate which was not much cutting at all, turned
the engine.
-Original Message-
From: Mercedes [mailto:mercedes-boun...@okiebenz.com] On Behalf Of Kaleb C.
Striplin
Sent: Wednesday, August 07, 2013 7:36 PM
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw and the saw won
So back to the say, it is a POS. I went out to star
Kaleb C. Striplin wrote:
Oh yea I pulled the cover and squirted a short squirt of either in the carb and
it still did not start
Might have a weak coil that dies when hot?
Mitch.
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/a
Oh yea I pulled the cover and squirted a short squirt of either in the carb and
it still did not start
Sent from my iPhone
On Aug 8, 2013, at 11:23 AM, Rich Thomas
wrote:
> On my 2-cycle things I squirt in a bunch of carb cleaner to loosen up the
> dried gunk (which appears very rapidly) tha
I got the darn thing started today fished what I needed to clear to close the
gate which was not much cutting at all, turned it off to
Move the logs and could not get to start. Almost started the first attempt then
that was it
Sent from my iPhone
On Aug 8, 2013, at 11:12 AM, Dieselhead <126die.
--R wrote:
> ...but still have my Schwinn 10spd in the garage I bought in high school,
> trading in my Stingray i outgrew, which would be worth a fortune today.
>
I used to assemble Stingray bikes at the Schwinn shop. And, I still
ride my 1938 rear drop-out New Departure Chicago Schwinn balloon
On my 2-cycle things I squirt in a bunch of carb cleaner to loosen up
the dried gunk (which appears very rapidly) that clogs the jets. The
carb cleaner will usually fire it off but you might need a couple
shots. Sometimes ether but that is probably not good as there is no oil
in there, but it
Try pulling off the filter cover and squirting a little gas into the
carb intake.
That should at least tell you if it is starving for fuel.
I am guessing that is the most likely cause of hard starting.
Did you check to see if it has spark?
Maybe a new spark plug?
Small engines like this ar
On 07/08/2013 6:36 PM, Kaleb C. Striplin wrote:
So back to the say, it is a POS. I went out to start it, have not ran
it in a couple days. Wore myself pulling on the damn thing, it never
started. I am going to take it to their nearest service provider I
guess and tell them either to fix it o
On 07/08/2013 5:48 PM, Dieselhead wrote:
Or take a dremel tool with a thin blade on it and cut a slot in the
end of the adjuster and use a regular screw driver. Works just fine
on my Poulan.
Manfred
Mitch Haley wrote:
Wow, all the eBay sources seem to have dried up.
Found a Zama double D f
I ride good ol merkin carbon these days but still have my Schwinn 10spd in the
garage I bought in high school, trading in my Stingray i outgrew, which would
be worth a fortune today.
--R (sent from my miniPad)
On Aug 7, 2013, at 5:05 PM, Gary Hurst wrote:
i learned about jap goods in the late
Foci
--R (sent from my miniPad)
On Aug 7, 2013, at 5:23 PM, Dan Penoff wrote:
> Both of the Ford Focus' we have/had are great cars. 170k and still going
> strong with minimal maintenance.
___
http://www.okiebenz.com
To search list archives http://www.okieb
i was a GM guy my whole life but they aren't even real to me anyone. Wrote Gary
Didn't you have a Saturn with timing chain issues?
Rick Knoble
Sent from My Samsung tablet
___
http://www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/
LMAO !!!
On Wed, Aug 7, 2013 at 6:39 PM, Kaleb C. Striplin wrote:
> thats back to the saw, sorry, cant type, arm is wore out.
>
>
>
> --
OK Don
"They who can give up essential liberty to obtain a little temporary
safety, deserve neither liberty nor safety." - Benjamin Franklin 1775
"in this worl
thats back to the saw, sorry, cant type, arm is wore out.
On 8/7/2013 6:36 PM, Kaleb C. Striplin wrote:
So back to the say, it is a POS. I went out to start it, have not ran
it in a couple days. Wore myself pulling on the damn thing, it never
started. I am going to take it to their nearest s
So back to the say, it is a POS. I went out to start it, have not ran
it in a couple days. Wore myself pulling on the damn thing, it never
started. I am going to take it to their nearest service provider I
guess and tell them either to fix it or shove it up their ass.
On 8/7/2013 5:53 PM, G
i still like bicycles and advise anyone looking for a bicycle that if they
see the words "tig welded taiwan" on the frame they are in good shape.
i've also been having good luck selling taiwan parts for mercedes to those
who don't want to be screwed by PRC yet dont want to buy something real
kore
don't think
> it will get any better.
> >
> > Richard
> >
> >
> >
> > From: Curt Raymond
> > To: Diesel List
> > Sent: Wednesday, August 7, 2013 3:40 PM
> > Subject: Re: [MBZ] I fought the saw and the saw won
&g
Or take a dremel tool with a thin blade on it and cut a slot in the
end of the adjuster and use a regular screw driver. Works just fine
on my Poulan.
Manfred
Mitch Haley wrote:
Wow, all the eBay sources seem to have dried up.
Found a Zama double D for $24, which is about $19 more than I pai
You could buy one here
http://www.lilredbarn.net/product-p/530035560.htm
Manfred
Kaleb C. Striplin wrote:
So I was at the lawn mower parts store today to get a belt for my mower and
asked if they has those special adjustment screw drivers. EPA won't let then
sell them
__
Or take a dremel tool with a thin blade on it and cut a slot in
the end of the adjuster and use a regular screw driver. Works
just fine on my Poulan.
Manfred
Mitch Haley wrote:
Wow, all the eBay sources seem to have dried up.
Found a Zama double D for $24, which is about $19 more than I pai
On Aug 7, 2013, at 4:05 PM, "Gary Hurst" wrote:
> for me, japanese good from japanese companies are the best there is,
> although i'm developing some very warm feelings towards korea and taiwan as
> well.
Correctly so. If you ever shop at Harbor Freight, the quality on any tools made
in Taiwan
gt;
> ____________________________
> From: Curt Raymond
> To: Diesel List
> Sent: Wednesday, August 7, 2013 3:40 PM
> Subject: Re: [MBZ] I fought the saw and the saw won
>
>
> Tut tut sir, American cars (which is a mis-nomer but lets stick with it, I
> obviously mean
The W140 is a very well built car if you can get past the wiring harness and
evaporator. If those are done the car is pretty much bulletproof in my opinion.
Consider that these were near $100k cars in their day and you'll understand the
design and engineering. You can find very nice examples for
i learned about jap goods in the late 70s. as young people, we mostly got
around by bicycle. our dads maybe or may not have had a car but dads
worked 15 hours a day, so they weren't going to be driving us around. moms
did not drive for the most part. our main mode of personal transportation
was
Japan sold a lot of cheap consumer goods; toys, notions, etc; during the
1930s; house slippers with paper soles, for example; such that "made in
Japan" was synonymous with junk. This continued after WW-2 until Japan set
up an agency that tested export goods and would not issue an export licence
labor unions
control the auto industry I don't think it will get any better.
Richard
From: Curt Raymond
To: Diesel List
Sent: Wednesday, August 7, 2013 3:40 PM
Subject: Re: [MBZ] I fought the saw and the saw won
Tut tut sir, American cars (which is a
Tut tut sir, American cars (which is a mis-nomer but lets stick with
it, I obviously mean the big 3) are of comparable, some would even
say higher, quality to the Asian brands right now. In particular
Honda and Toyota are in a bit of trouble lately. I wonder if maybe
they've gotten bit by the s
y the same bug
that caught Mercedes 20 years ago?
When it comes to rental cars lately I prefer American, specifically Ford if it
comes right down to it.
-Curt
Date: Wed, 7 Aug 2013 08:45:27 -0700 (PDT)
From: Richard Hattaway
To: Mercedes Discussion List
Subject: Re: [MBZ] I fought the saw an
> Dieselhead wrote:
>
> +1 for Where's the Diesel chain saws?
It's old and underpowered. Comet A or Comet B, or a Jonsered XA.
A couple youtube videos of them.
>From http://www.youtube.com/watch?v=PAUjEsgPXJI
>From http://www.youtube.com/watch?v=hXR3ZOPlRys
--Philip
_
On 07/08/2013 12:08 PM, Scott Ritchey wrote:
The great irony here is that the Japanese learned quality management from
the US after WWII (Google: W. Edwards Demming). The US developed/used these
quality approaches for the massive WWII war production. The ironic part is
that US industry then ble
1 - 100 of 137 matches
Mail list logo