by simple balanced ring
modulator, where both inputs have the same signal.
If you done it in DSP, you will get excellent results than in analog
electronics due non-linear characteristics of diodes.
Regards
Jaroslav Lukesh
--
note
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
, but mathematically right. Finally, all that is mathematically
right, should not be right in life.
Regards
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
playable in a club)
I'd
| prefer to keep this and just remove the DC offset... I think it can be
then remove all under 5Hz, these freqs you do not need, or it is created in
another way (by rythm) from transients.
Regards
Jaroslav Lukesh
ker at Qts 1.17, rez 45Hz
Vas 50lt. Much better response at 16-100Hz +/- 6dB than speakers with Qts
about 0.3 (not usable for this way of use).
Regards
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing l
?
so better -h -abr 128 -mf
mf because they have very little differential signal, thus will make more
bits for summing - monophonic signal and without switching artefacts.
| Please note: I do have perfectionist tendencies. :)
me too :)
Jaroslav Lukesh
| Odesílatel: Stephan Ebertshäuser [EMAIL PROTECTED]
| I just want to ask which layer2 encoder do you prefer or recommend??
| (SOLOH or toolame?)
I like hardware DAB codecs :(expensive)
But if I will time, I try toolame and soloh to test it.
Regards
Jaroslav Lukesh
home stereo, but no lower.
Regards
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
.
Regards
Jaroslav Lukesh
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
| After monday I got only two messages ( both on wednesday ) :
|
| - [MP3 ENCODER] test please ignore , from Jan Penman
| - [MP3 ENCODER] presets , by Robert Hegemann
|
| David Balazic
me too. Maybe holidays?
Jaroslav Lukesh
TP servers,
maybe you are attacked by spammers (our mailserver was attacked by spammer
- legacy internet advertising agency at begin of june - within 3 days it
send more than one million e-mails - where our e-mails has none - up to few
hours - delay).
Regards
Jaros
--cwlimit (default is cca 8, yoiu can test it from 0 to
11.025).
Regards
Jaroslav Lukesh, K-net
--
http://www.k-net.cz
Multimedia, Networking, Communications
Windows terminals, NC
compute
| On Fri, Aug 18, 2000 at 08:37:30AM +0200, Jaroslav Lukesh wrote:
| | Now all I need is to find (or write) a program to create a correct
Xing
| | header. I really don't feel like re-ripping all those cds (about 30).
|
| www.chat.ru\~lrsp\English\util.html
|
| Heh, just after replying
| Now all I need is to find (or write) a program to create a correct Xing
| header. I really don't feel like re-ripping all those cds (about 30).
www.chat.ru\~lrsp\English\util.html
Regards JL.
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
hadphones.
Regards
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
| I assume that most users of LAME are using the Linux OS, as the GTK
extensions are based around (I believe) X-windows. I don't use Linux, and
am stuck with windoze. Are there any utilities around to run the frame
analyser with windoze 95, 98 or NT ?
|
| PS: I know windoze sux, but most of the
e CD collection
with many files under one subdir, then CPU load goes too high (130% :-)
and currently played song has dropouts, because it open and scan each MP3
file for its length.
But it runs at 486-66 (with limited quality).
Regards
I get around to coding it up)? That seems to be
what
| is making the difference in the case of LAME; I assume that FhG is using
| some filtering as well, though there's no way to disable it and see for
use option -bw 22050 as bandwidth in Hz
Jaroslav Lukesh
| Hi folks,
|
| Just found this link to Mayah EditPro:
| http://cooler.irk.ru/sound/software/editors/edpro22.zip
Hmmm... And what about Editpro v 3.0...?
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER
| Odesílatel: Stephan Ebertshäuser [EMAIL PROTECTED]
| Jaroslav Lukesh schrieb:
|
| | For cassette you do not need to have bitrate higher than 160k CBR,
when you
|
| use phase corrector. Else use higher and stereo (dual channel).
|
| I would like to know more about your phase corrector tool
?
| Above 192kbps is much better MPEG 1 or 2 Layer 2.
| And how i make it?
| Give some keys ;-)
toolame or my yesterdays mails about it.
Regards
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing l
*** ??? why
-q n
is meant for internal testing, its behaviour may change from day to day,
so get out of a habit using it
To answer Alexander's question, using -h will be the best.
*** -q 1 with lame 3.85beta works fine
Ciao Robert
Regards
Jaroslav Lukesh
Hi,
Toolame is fairy good. But I prefer proffessional hardware DAB :-()
encoders. There are fantastic!! (but not as compatible with software mpeg
players :-(((
Syntrillium MPEG L1-2 encoder is too good, but not as hardware one.
Regards
Jaroslav Lukesh
quality sound (minimal additional
processing) which in europe you can hear with really good equipment, with
boomboxes you will hear better (s)Hit-Stations.
No flame please, just for your informations.
Regards
Jaroslav Lukesh
I have some file from this backup (mostly spoken word), over weekend I will
try to reencode at 22kHz, 56-64kbps stereo and give feedback.
Regards
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
Odesílatel
Sincerely, Alexander from Russia
| PS.LAME is the BE$T!
SURE! (but not for 80kbps, here are still better mp3enc31 and l3enc too)
Regards
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing list ( http://g
| Odesílatel: [EMAIL PROTECTED]
|
| On 27-Jul-2000 Jaroslav Lukesh wrote:
| Above 192kbps is much better MPEG 1 or 2 Layer 2.
| I still haven't seen any documenation or listening tests which support
this.
| Anyone seen any references worth checking on?
|
Refferences no. But personal listening
it for that, you do not need buy full
version)
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
Curretly none MP2, only mp3 for home story/music-jukebox.
But If I use in past times, then CoolEdit MPEG plugin that was free
downloadable for cooledit 95 (it is not MP3 plugin). It has two
psychoacoustics models, ATT and NICAM and should save Layer 1 and layer 2
miscelaneous stereo modes and
"thicker".
Regards
Jaroslav Lukesh
--
note: (Bill) Gates to Hell!
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
he flames of hell."
Dear all, I am very sorry for OT, but if someone could put this advertising
into MPEG (or some else digital video format), I will very happy.
Many thanks for encoding, you should send it by e-mail to [EMAIL PROTECTED]
(unlimited size of mailbox) and I will put into some
But price is more than twice as much than it cost if you will import
individually one sample from HongKong.
Regards JL.
--
| Odesílatel: Meister Roger [EMAIL PROTECTED]
| Another good one :
| http://www.pineusa.com/d'music/sm200c_features.htm
|
| anything you need, but expansive... :(
mailto:[EMAIL PROTECTED]
If you download upx packer, you can simply to unpack packed files.
regards
Jaroslav Lukesh
--
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
t, because
each
| mp3 is decoded separately.
You can use --nores option in LAME for disabling bit reservoir :-)
In fact, you little go down with quality, but you can safely cut MP3s.
Regards
Jaroslav Lukesh
--
--
MP3 ENCODER ma
Can you try to change broadcast protocoll to UDP transfers? Here should be
problem.
Jaroslav Lukesh, K-net
--
http://www.k-net.cz
Multimedia, Networking, Communications
Windows terminals, NC
(and from CD too!)
without WAV file, wheen you check appropriate option at MP3 tab. I use it
for recording from terrestrial radio stations, soundtracks from TV etc. But
I do not have grabbable CD-ROM (Mitsumi FX400 :((
Regards
Jaroslav Lukesh
ponse to 9-10k).
REgars
Jaroslav Lukesh
--
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
sorry for test, but I do not receive any message for 2 days.
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
amplifier and soundcard, aou dont need it.
Regards
Jaroslav Lukesh
--
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
use EQ in single file mode (it is good to max gain 16k band when you
resample to 22kHz, other leave flat).
Regards
Jaroslav Lukesh
--
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
D recorded on multitrack from
Yamaha. But standard stereo mode sounds same as SONY.
Jaroslav Lukesh
--
--
MP3 ENCODER mailing list ( http://geek.rcc.se/mp3encoder/ )
41 matches
Mail list logo