*snmp_client.c::snmp_sess_synch_response(*) code is erroneous.
snmpget request must sent a query for discovering snmpEngineID which the
following code is sending.
After this it is supposed to send the actual SNMP get request for a MIB
variable say sysContact.0
When it does context probing it invok
I have installed net-snmp 5.6.2.1 and sent out snmp get request using
snmpget command. This is a SNMPv3 request over TLS that i'm sending.
snmpget request sends out two get request
1) Read operation for snmpEngineID.0
2) Actual get request querying for a MIB variable say sysContact.0
>From the to
On 10 January 2013 14:38, Felipe Augusto de Souza wrote:
> However, I have been trying to set a structure which is intended to be a
> command with two paramaters (actually, two integers), but I always need to
> be sent together.
>
> I am trying to do like this:
>
> Command ::= SEQUENCE {
> command
2010/1/19 sanjaykumar :
> But In below function and other similar function,
> data are not access from below Pointer but try to access the other element
> of "fTable_data data;"
Please take a look at the file 'ifTable/ifTable_defs.h'
Dave
Thanks you... Dave
sanjay
Dave Shield wrote:
> 2010/1/19 sanjaykumar :
>
>> But In below function and other similar function,
>> data are not access from below Pointer but try to access the other element
>> of "fTable_data data;"
>>
>
> Please take a look at the file 'ifTable/ifTabl
Extract the current value of the ifMtu data.
* copy (* ifMtu_val_ptr ) from rowreq_ctx->data
*/
(*ifMtu_val_ptr) =
rowreq_ctx->data.ifMtu; /*my doubt is here and in other similar
function in
"if-mib/i
2010/1/19 sanjaykumar :
> I have a doubt regarding IF-MIB.
> As I found that We get the data for if Table
> from structure "ifTable_data data;" an member of structure
> "ifTable_rowreq_ctx * rowreq_ctx"
> but what I observe that most of the member of
Hi All,
I have a doubt regarding IF-MIB.
As I found that We get the data for if Table
from structure "ifTable_data data;" an member of structure
"ifTable_rowreq_ctx * rowreq_ctx"
but what I observe that most of the member of structure
"ifTable_data
users@lists.sourceforge.net
Subject: Re: Multi-Agent doubt
Sergio Cabaço wrote:
> Hello you all,
>
>
> I'm have encountered a problem to what a still don't have a clue how to solve
> or if it is possible to do so.
>
> It is a simple situation but a com
Sergio Cabaço wrote:
> Hello you all,
>
>
> I'm have encountered a problem to what a still don't have a clue how to solve
> or if it is possible to do so.
>
> It is a simple situation but a complicated jigsaw till the moment. The
> objective is to have different ip addresses or different ports
Hello you all,
I'm have encountered a problem to what a still don't have a clue how to solve
or if it is possible to do so.
It is a simple situation but a complicated jigsaw till the moment. The
objective is to have different ip addresses or different ports that can receive
snmp requests. The
2008/6/17 Bhaskararao vakamullu <[EMAIL PROTECTED]>:
> How the above value looks like when a walk is done on ipCidrRouteTable
> for example?.
$ netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
169.254.0.0 0.0.0.0 255.2
Hi All,
How the above value looks like when a walk is done on ipCidrRouteTable for
example?.
Please reply and thanks in advance.
Thanks and Regards,
Bhaskararao.V
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for
the use of
2008/6/16 Mike Ayers <[EMAIL PROTECTED]>:
>You may be able to create entries in an ipNetToMediaTable,
> but you cannot change them, as the MAX-ACCESS of the
> two non-index objects is read-create.
Sorry, Mike - that's not correct.
"read-create" is the highest level of access, and covers "r
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of Bhaskararao vakamullu
> Sent: Friday, June 13, 2008 7:48 AM
> I am using net snmp for my router for managing.I am trying
> to configure ipNetToMedia Table
> entries using snmpset command.
You may be able to create
Hi net snmp group,
I am using net snmp for my router for managing.I am trying to configure
ipNetToMedia Table
entries using snmpset command.I loaded RFC 4293 MIB.
I am using netsnmp-5.4.1 and would like to know whether this configures
ipNetToMedia Table
entries as RFC itself says this tab
Hi net snmp group,
I am using net snmp for my router for managing.I am trying to configure
ipNetToMedia Table
entries using snmpset command.I loaded RFC 4293 MIB.
I am using netsnmp-5.4.1 and would like to know whether this configures
ipNetToMedia Table
entries as RFC itself says this tab
Hub is impossible - unless its some fancy managed hub (never used one
- if they exist) - must do physical survey.
Most switches will have a forwarding database you can look at, just
eliminate all IPs/MACs that are connected to uplink ports from the
list and you'll have it.
On Jan 29, 2008 12:10 P
Hi ,
how can i do the topology of a network??
For example , how can i know whether a group of PC's are connected to a
switch or hub or router??
Thanks in advance for your help,
Mano
-
This SF.net email is sponsored by: Micr
@lists.sourceforge.net
Subject: Re: Doubt related to SNMPGET
On 16/03/07, [EMAIL PROTECTED] wrote:
> 1) Is there any error condition such that SNMP agent will not send any
> response PDU to manager?
Yes.
If you specify an unknown community (with SNMPv1 or SNMPv2c),
then the agent simply drops the r
,
Somenath
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Dave Shield
Sent: Friday, March 16, 2007 3:24 PM
To: Somenath Pal (WT01 - Broadband Networks)
Cc: net-snmp-users@lists.sourceforge.net
Subject: Re: Doubt related to SNMPGET
On 16/03/07, [EMAIL PROTECTED
On 16/03/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> 1) Is there any error condition such that SNMP agent will not send any
> response PDU to manager?
Yes.
If you specify an unknown community (with SNMPv1 or SNMPv2c),
then the agent simply drops the request altogether. It does not
send ba
Hi all,
I have the following doubt about SNMPGET.
1) Is there any error condition such that SNMP agent will not send any
response PDU to manager?
In case of error condition which is not known to SNMP agent (which is
return by the subsystem responsible for implementing MIB attribute)
what SNMP
On Thu, 2007-03-01 at 22:48 +, Dave Shield wrote:
> On 01/03/07, Joao Miguel Ferreira <[EMAIL PROTECTED]> wrote:
> > I'dd like to know where I can find documentation explaning the
> > contents/types of each of the arguments passed to the function when it
> > gets called...
>
> AGENT.txt
Hi Da
On 01/03/07, Joao Miguel Ferreira <[EMAIL PROTECTED]> wrote:
> I'dd like to know where I can find documentation explaning the
> contents/types of each of the arguments passed to the function when it
> gets called...
AGENT.txt
Dave
-
Hello all,
bellow is an excerpt of code generated by mib2c for the implementation
of some MIB (the upsMIB in this case...)
I'dd like to know where I can find documentation explaning the
contents/types of each of the arguments passed to the function when it
gets called...
specially this one: "oid
hi,
hi,
Iam using SNMP version 5.3.0.1.All the user and
access control informations are configured with
"rwuser".
When a v 3 set request is sent for a read-only scalar object,
I get the response messagse as
./snmpset -v 3 -l authNoPriv -u antonyraj -a MD5 -A joseph12
On 2 Nov 2006 05:49:50 -, joseph antony
<[EMAIL PROTECTED]> wrote:
> What ever SIGNAL it may be say SIGKILL or SIGTERM or HUP the
> behaviour is same.
I'm surprised.
The expected behaviour of KILL, TERM and HUP is very different.
HUP ought to signal the agent to re-read the config file, whi
Thomas, What ever SIGNAL it may be say SIGKILL or SIGTERM or HUP thebehaviour is same.net-snmp-users@lists.sourceforge.net wrotejoseph antony wrote:> 4. Now stop the agent by giving a kill -9 agent_pid.Argh. You've been saying "SIGTERM" initially, but you're sending SIGKILLhere. Don't do.+
On 31 Oct 2006 12:16:23 -, joseph antony wrote:
> 4.Now stop the agent by giving a kill -9 agent_pid.
As Thomas said.
If you send a daemon the emergency stop signal (-9), then:
a) the agent may indeed end up in an unexpected state
b) you deserve all you get!
You should *NEVER* use
joseph antony wrote:
> 4. Now stop the agent by giving a kill -9 agent_pid.
Argh. You've been saying "SIGTERM" initially, but you're sending SIGKILL
here. Don't do.
+Thomas
--
Thomas Anders (thomas.anders at blue-cable.de)
--
Dave, Steps to reproduce the problem.1.Configure a user by adding "createUser antony MD5 joseph123" in the /var/net-snmp/snmpd.conf file.2.add the line "rouser antony" in /usr/local/share/snmp/snmpd.conf3. start the agent and open the /var/net-snmp/snmpd.conf file you can see a usmUser lin
[ First - *please* don't mail me privately, without copying
any responses to the mailing list. I don't have the time
or inclination to offer private, unpaid, SNMP consultancy.
Keep discussions to the list, where others can both learn
and offer advice. Thanks. ]
On 31 Oc
ted the snmp agent the usmUser line got
> deleted from the /var/snmp/snmpd.conf file.
I doubt that the "trapsess" line is relevant here.
I'm more interested in how you restart the agent.
In particular, are you shutting the agent down before restarting it,
or just sending it a re
Hi, I have configured a user name in /var/snmp/snmpd.conf file i.e added the following line"createUser antony MD5 joseph123" , added "rouser antony" in usr/local/share/snmpd.conf file and started the agent a usmUser line has got created in the /var/snmp/snmpd.conf file.Then I added this user wi
Hi ALL,
I have a doubt regarding GETNEXT in snmpv3.
Suppose we have three tables T1, T2, T3
they are in lexicographic order. Table T1 and T3 are in same view and T2 in
different view.
Now for GETNEXT in the last row, last
column of table T1 should the agent return error or first
On 26/09/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> Suppose we have three tables T1, T2, T3 they are in lexicographic order.
> Table T1 and T3 are in same view and T2 in different view.
>
> Now for GETNEXT in the last row, last column of table T1 should the agent
> return error or first row
On 04/08/06, [EMAIL PROTECTED] wrote:
> Is there any relation between engine Id and community?
No.
If nothing else, an SNMP agent will only have one engineID, but could
easily respond to several communities (with potentially different
views for each one).
The two are not connected in the slig
Hi
All,
Is there any
relation between engine Id and community? If so will any one explain me how they
are related.
Regards,
Raghavendra.
S
-
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.n
Title: Doubt regarding BITS
Hi All,
I am using BITS in my snmp agent implementation is there any sample code available for reference for both SET and GET operation.
I am having another doubt i.e. how the bits values to be given from manager side. I am using the following command for
Hi,
I am implementing snmpset the index is a string index I used
following command to generate the .c and .h files
./mib2c -c mib2c.iterate.conf Vlan-MIB::VlanTable
The command is is
./snmpset -v 2c -c private localhost Vlan-MIB::Vlantype.\'lr\' i 1
But in the case MODE_SET_RESERVE1 I am prin
Title: snmp set doubt
Hi All,
I am refering the the following link for implementing snmp set http://net-snmp.sourceforge.net/tutorial/tutorial-5/toolkit/mib_module/index.html
My doubt is in MODE_SET_COMMIT only we are writing the data to the memory if somthing goes wrong how net-snmp
Hi All, I am using
net-snmp-5.3.0.1. I have very basic doubt about engineID's. Which goes as
below. From net-snmp documents I found out few things about
engineID. (1) if u put some command say :
rwuser ---> in
/usr/local/share/snmp/snmpd.conf createUser
my
Hi All,
I am using net-snmp-5.3.0.1. I have
very basic doubt about engineID's. Which goes as below.
From net-snmp documents I found
out few things about engineID.
(1) if u put some command say :
rwuser ---> in
/usr/local/share/snmp/snmpd.conf
createUse
>>>>> On Fri, 23 Dec 2005 12:39:54 +0530, <[EMAIL PROTECTED]> said:
sasikumar> In one of the document I read this, the content of the
sasikumar> document is (Oreilly Essential SNMP this raised the doubt).
One of the things I hate when picking up books in book store
On Fri, 2006-01-27 at 21:36 +0530, [EMAIL PROTECTED] wrote:
>In the below mentioned case only one file we will be using how
> my other modules will be compiled. Will configure_require take of
> that
What do you think?
Don't ask me - *try* it!
> and does this require myModules.c file also.
Title: RE: --with-mib-module doubt
Hi Dave,
Normally what is observed is by giving all the module names in the configure command the module names are added in the make file. In the below mentioned case only one file we will be using how my other modules will be compiled. Will
On Fri, 2006-01-27 at 14:24 +0530, [EMAIL PROTECTED] wrote:
> Hi All,
> I am having one doubt, I am trying to register 35 mib handler
> functions using --with-mib-modules option but only few are getting
> registered i.e first 30 in the list are getting registered the last
> few
Title: --with-mib-module doubt
Hi All,
I am having one doubt, I am trying to register 35 mib handler functions using --with-mib-modules option but only few are getting registered i.e first 30 in the list are getting registered the last few are not getting registered. Is there any
Hi,
Thanks for your reply,
In one of the document I read this, the content of the document is (Oreilly
Essential SNMP this raised the doubt).
"After making these changes, stop and restart the agent. When the agent is
started, it reads the configuration
file, computes secret keys for the
> On Fri, 23 Dec 2005 11:04:32 +0530, <[EMAIL PROTECTED]> said:
sasikumar> If I am creating a v3 user an unique key will be generated
sasikumar> from engineID, for net-snmp engineID is IP address(Is this
sasikumar> IP address is the managers IP address).
By default, net-snmp uses it's own alg
Hi All,
If I am creating a v3 user an unique key will be generated from
engineID, for net-snmp engineID is IP address(Is this IP address is the
managers IP address).
Regards,
Sasikumar.B
---
This SF.net email is sponsored by: Splunk Inc.
Thanks Dave...
On Tue, 2005-06-14 at 19:07, Dave Shield wrote:
> On Tue, 2005-06-14 at 13:59, Sasikumar Bodathula wrote:
> > Hi Dave,
> > I have attached the code which i little bit modified to learn abt
> > set function scalar_int.c is the example file that i took from the
> > net-snmp code
On Tue, 2005-06-14 at 13:59, Sasikumar Bodathula wrote:
> Hi Dave,
> I have attached the code which i little bit modified to learn abt
> set function scalar_int.c is the example file that i took from the
> net-snmp code and modified.
Thanks.
I've configured that file into my agent, and it wo
> I am having doubt do i need to set requests->delegated to zero.
>
> You shouldn't normally need to touch the 'delegated' flag.
> This is a very specialised requirement, and isn't relevant
> for a simple watched instance, as you've been describing.
>
On Tue, 2005-06-14 at 13:23, Sasikumar Bodathula wrote:
> I am having doubt do i need to set requests->delegated to zero.
You shouldn't normally need to touch the 'delegated' flag.
This is a very specialised requirement, and isn't relevant
for a simple watched instance,
Hi All,
I am having doubt do i need to set requests->delegated to zero.
for me the function netsnmp_check_for_delegated() is returning 1.
On Mon, 2005-06-13 at 16:13, Sasikumar Bodathula wrote:
> Can any one tell me why netsnmp_assert(requests->agent_req_info ==
> asp->reqin
Can any one tell me why netsnmp_assert(requests->agent_req_info ==
asp->reqinfo); is failing am i doing anything wrong in my code. or this
is due to access control.
On Mon, 2005-06-13 at 10:32, Sasikumar Bodathula wrote:
> Here are some more information.
> The location it is failing is in the file
Here are some more information.
The location it is failing is in the file snmp_agent.c
in the function netsnmp_check_requests_status()
it is entering thw while condition and failing in the netsnmp_assert
function. this is the line it is showing failed in the snmpd.log file.
On Sat, 2005-06-11 at 1
Here is more debug data. I added few print statements to see the flow in
the master code.
The flow which i was able to trace.
1. handle_set function is called.
2. handle_var_requests function is called.
3. default case is called
4. netsnmp_check_requests_status is called. In this function i am
p
Access control for snmpv2c user is set following.
rwcommunity writeuser 10.0.0.50
On Fri, 2005-06-10 at 20:25, Robert Story wrote:
> On 10 Jun 2005 19:26:22 +0530 Sasikumar wrote:
> SB> When i was testing the set i noticed that in the function
> SB> netsnmp_check_requests_status() requests->s
On Fri, 10 Jun 2005 15:59:53 +0100 Dave wrote:
DS> On Fri, 2005-06-10 at 15:55, Robert Story wrote:
DS> > On 10 Jun 2005 19:26:22 +0530 Sasikumar wrote:
DS> > SB> When i was testing the set i noticed that in the function
DS> > SB> netsnmp_check_requests_status() requests->status is set as
DS>
On Fri, 2005-06-10 at 15:55, Robert Story wrote:
> On 10 Jun 2005 19:26:22 +0530 Sasikumar wrote:
> SB> When i was testing the set i noticed that in the function
> SB> netsnmp_check_requests_status() requests->status is set as
> SB> SNMP_ERR_NOTWRITABLE before calling MODE_SET_RESERVE1 can nay
On 10 Jun 2005 19:26:22 +0530 Sasikumar wrote:
SB> When i was testing the set i noticed that in the function
SB> netsnmp_check_requests_status() requests->status is set as
SB> SNMP_ERR_NOTWRITABLE before calling MODE_SET_RESERVE1 can nay one tell
SB> me why this is happening. Is it am i doing
Hi All,
When i was testing the set i noticed that in the function
netsnmp_check_requests_status() requests->status is set as
SNMP_ERR_NOTWRITABLE before calling MODE_SET_RESERVE1 can nay one tell
me why this is happening. Is it am i doing anything wrong.
On Fri, 2005-06-10 at 08:47, Sasikumar
Hi All,
I was testing the snmpset with the example file scalar_int.c that
comes with the net-snmp. I extended it to test set but it is failing
every time giving following error in the mib-browser.
THIS IS THE RESPONSE FOR THE SET REQUEST
Request Failed: Get Response PDU received from 127.0.0
On Thu, 2005-04-28 at 06:33, priya wrote:
> How to configure Rmon in net-snmp.
Please see the FAQ entry:
Does the agent support the RMON-MIB?
Dave
---
SF.Net email is sponsored by: Tell us your software development plans!
Take t
Hai,
How to configure Rmon in
net-snmp.Please tell the steps.I don't know how to retrieve rmon information
using get/getnext command in Linux.
Thanks a lot for ur
suggestion
Hello Robert,
I have tested the patch and it seems to work in these
conditions:
1. trapsses destination down
2. destination started after agent started
3. destination restarted while agent running
And all traps were received as expected. No error
message was seen.
Thanks a lot for your help.
Hello,
I have tested what you sent me, but I'm getting this
message:
snmpd: send_trap: USM unknown security name (no such
user exists)
NET-SNMP version 5.2.1
snmpd: send_trap: USM unknown security name (no such
user exists)
snmpd: send_trap: USM unknown security name (no such
user exists)
It ap
On Fri, 22 Apr 2005 09:00:58 -0700 (PDT) Mauricio wrote:
MR> I have tested what you sent me, but I'm getting this
MR> message:
MR>
MR> snmpd: send_trap: USM unknown security name (no such
MR> user exists)
Sigh. Ok, I now know more about trap sessions and engineID discovery that I
really wanted to
On Fri, 22 Apr 2005 15:02:10 +0100 Dave wrote:
DS> On Fri, 2005-04-22 at 14:54, Robert Story wrote:
DS> > Ok, I found my mistake. Reverse the previous patch,
DS> > and apply this one instead...
DS>
DS>
DS> @@ -704,6 +704,7 @@
DS> session->version = SNMP_DEFAULT_VERSION;
DS> session->sec
On Fri, 2005-04-22 at 14:54, Robert Story wrote:
> Ok, I found my mistake. Reverse the previous patch,
> and apply this one instead...
@@ -704,6 +704,7 @@
session->version = SNMP_DEFAULT_VERSION;
session->securityModel = SNMP_DEFAULT_SECMODEL;
session->rcvMsgMaxSize = SNMP_MAX_MSG_
On Mon, 18 Apr 2005 10:58:36 -0700 (PDT) Mauricio wrote:
MR> I have deleted that line, but there's still errors. I
MR> used gdb to debug and got this:
Ok, I found my mistake. Reverse the previous patch, and apply this one
instead...
--
NOTE: messages sent directly to me, instead of the lists, wi
Hello Robert,
I have deleted that line, but there's still errors. I
used gdb to debug and got this:
Program received signal SIGSEGV, Segmentation fault.
snmp_sess_synch_response (sessp=0x80d96a8,
pdu=Variable "pdu" is not available.
) at snmp_client.c:870
870 cbsav = ss->callback;
(gdb)
On Sun, 17 Apr 2005 11:44:21 -0700 (PDT) Mauricio wrote:
MR> I have tested the patch you sent me, but it seems to
MR> fail. I get this line:
MR>
MR> C:\usr>snmpd
MR> netsnmp_assert x failed C:\Documents and
MR> Settings\Maure\Desktop\net-snmp-5.2.1\ne
MR> t-snmp-5.2.1\snmplib\snmp_api.c:1271
MR>
Hello Robert,
I have tested the patch you sent me, but it seems to
fail. I get this line:
C:\usr>snmpd
netsnmp_assert x failed C:\Documents and
Settings\Maure\Desktop\net-snmp-5.2.1\ne
t-snmp-5.2.1\snmplib\snmp_api.c:1271
The code that seems to generate the error is this:
if (slp != NULL) {
On Fri, 15 Apr 2005 10:09:58 -0400 Robert wrote:
RS> The patch was for 5.0.9, and I changed it a bit, so this is untested. Give
RS> it a whirl and let me know if:
RS>
RS> a) there is no error message at startup if the peer is down
RS> b) after bringing up the peer, informs are received...
forgot
On Thu, 14 Apr 2005 18:35:08 -0700 (PDT) Mauricio wrote:
MR> > Yeah, that's what he tried. I do remember seeing a
MR> > patch go by that delayed
MR> > engineID discovery until it was needed. I'll see if
MR> > I can dig it up...
MR> >
MR> I'd appreciate that.
The patch was for 5.0.9, and I changed
Hello Robert,
I'd appreciate that.
Thanks a lot.
--- Robert Story <[EMAIL PROTECTED]> wrote:
> On Thu, 14 Apr 2005 09:45:24 +0100 Dave wrote:
> DS> On Thu, 2005-04-14 at 01:30, Mauricio Reyes
> wrote:
> DS> > Yes, I can send traps with those parameters.
> When the
> DS> > trapsess destination m
On Thu, 14 Apr 2005 09:45:24 +0100 Dave wrote:
DS> On Thu, 2005-04-14 at 01:30, Mauricio Reyes wrote:
DS> > Yes, I can send traps with those parameters. When the
DS> > trapsess destination machine is up, I receive the
DS> > traps as expected.
DS>
DS> The situation here sounds slightly different.
D
On Thu, 2005-04-14 at 01:30, Mauricio Reyes wrote:
> Yes, I can send traps with those parameters. When the
> trapsess destination machine is up, I receive the
> traps as expected.
That's basically working as expected.
Remember that traps are an *unreliable* mechanism.
If the trap receiver is down
Hello Robert,
Yes, I can send traps with those parameters. When the
trapsess destination machine is up, I receive the
traps as expected.
Can you help me with this? I really need to solve
this.
Thanks a lot.
--- Robert Story <[EMAIL PROTECTED]> wrote:
> On Tue, 29 Mar 2005 17:33:16 -0800 (PST
lt;[EMAIL PROTECTED]>
CC: net-snmp-users@lists.sourceforge.net
Subject: Re: Net-snmp doubt
Date: Fri, 1 Apr 2005 19:10:09 -0500
On Tue, 29 Mar 2005 17:33:16 -0800 (PST) Mauricio wrote:
MR> 1. When you are using trapsess and the destination is
MR> down, does it retries to connect? Because the trap
On Tue, 29 Mar 2005 17:33:16 -0800 (PST) Mauricio wrote:
MR> 1. When you are using trapsess and the destination is
MR> down, does it retries to connect? Because the traps
MR> are lost.
MR> I get this error:
MR> /usr/local/share/snmp/snmpd.conf: line 30: Error:
MR> snmpd: failed to parse this line
Hello,
I have two questions concerning Net-snmp:
1. When you are using trapsess and the destination is
down, does it retries to connect? Because the traps
are lost.
I get this error:
/usr/local/share/snmp/snmpd.conf: line 30: Error:
snmpd: failed to parse this line or the remote trap
receiver i
On Tue, 1 Mar 2005 12:03:21 -0800 (PST) Mauricio wrote:
MR> I was looking at the way alarms work and I have a
MR> question: what is the minimum time you can tell a
MR> alarm to repeat itself?
MR> is it 1 second?
Yes.
MR> is it posible to go to milliseconds?
No, the api is just for seconds. You'd
Hello,
I was looking at the way alarms work and I have a
question: what is the minimum time you can tell a
alarm to repeat itself?
is it 1 second?
is it possible to go to milliseconds?
another question I have is this:
when you are using trapsess and the destination is
down, does it retries to con
Hello,
I was looking at the way alarms work and I have a
question: what is the minimum time you can tell a
alarm to repeat itself?
is it 1 second?
is it posible to go to milliseconds?
Thanks,
mauricio
__
Do you Yahoo!?
Yahoo! Mail - Easier than
> i am trying to use authentication and enryption using snmp v3.
> a snmpget works well
> but when i use the code below i get:
> Encryption support not enabled.
> Why it says it doesn't support encryption, if it works above?
> the agent was compiled with openssl
I don't think the problem is
> On Mon, 06 Dec 2004 18:15:15 +, "Mauricio Reyes" <[EMAIL PROTECTED]>
> said:
Mauricio> I was wondering where the snmpd.conf file is read from
Mauricio> within the code. i need to know how it is read.
In init_snmp() (inside read_configs())
See the read_config manual page.
Mauricio
ailto:[EMAIL PROTECTED] On Behalf Of Pedro
Neves
Sent: Tuesday, December 07, 2004 1:43 AM
To: Sundeep Singh
Cc: net-snmp
Subject: Re: snmpset() application doubt
On Tue, 2004-12-07 at 04:18, Sundeep Singh wrote:
On Mon, 6 Dec 2004, Pedro Neves wrote:
Dear all,
I am trying to work with the sn
doubt
On Tue, 2004-12-07 at 04:18, Sundeep Singh wrote:
> On Mon, 6 Dec 2004, Pedro Neves wrote:
>
> > Dear all,
> >
> > I am trying to work with the snmpset() application but it retrieves
an
> > error related with the permissions.
> >
> > $snmpset -v 2c -
On Tue, 2004-12-07 at 04:18, Sundeep Singh wrote:
> On Mon, 6 Dec 2004, Pedro Neves wrote:
>
> > Dear all,
> >
> > I am trying to work with the snmpset() application but it retrieves an
> > error related with the permissions.
> >
> > $snmpset -v 2c -c private
> > Error in packet.
> >
On Mon, 6 Dec 2004, Pedro Neves wrote:
Dear all,
I am trying to work with the snmpset() application but it retrieves an
error related with the permissions.
$snmpset -v 2c -c private
Error in packet.
Reason: notWritable (that object does not support modification)
what object are u tryin
Dear all,
I am trying to work with the snmpset() application but it retrieves an
error related with the permissions.
$snmpset -v 2c -c private
Error in packet.
Reason: notWritable (that object does not support modification)
What should I do?
Thanks in advance for any possible help.
Hi all,
I was wondering where the snmpd.conf file is read from within the code. i
need to know how it is read.
Also i'd like to know how the MIB's are read and from where in the code.
Last, how does the snmptranslate command works?
thanks
mauricio
_
lt;[EMAIL PROTECTED]>
CC: [EMAIL PROTECTED]
Subject: Re: netsnmp doubt
Date: Tue, 9 Nov 2004 15:42:07 -0800
Mauricio:
I recommend that you read the book Windows NT SNMP, and use its
examples as a means of first education regarding the use of SNMP
in a Windows environment. The author of the book
Mauricio:
I recommend that you read the book Windows NT SNMP, and use its
examples as a means of first education regarding the use of SNMP
in a Windows environment. The author of the book has done a
superb job of making SNMP simple to understand, if it is a bit
abridged. The book is published by
Hi All,
I haven't had an answer so I don't know if the mail was received. Just in
case below is what i wrote.
thanks
Mauricio.
-
Hi all,
I'm new to net snmp. i work with microsoft windows. I am trying to use the
snmpdemoapp.c in the tutorial. but can't
1 - 100 of 111 matches
Mail list logo
