Re: [newbie] Printing with Linux

Scott You might check your BIOS setting for your parallel port, you need to have EPP or bidirectional enabled for this port. I saw this tip posted May, 29 1999 by Bernhard Rosenkraenzer, after enabling EPP my printing problems went away. HTH Ron Case From: Scott Sweeney [EMAIL PROTECTED] To:

Re: [newbie] 1600 x 1200 res

NOTE: not all vid cards will do 1600x1200 in 32bpp! I'd run xf86config all over again (back up your existing config file first!) it will get to a bit asking you about your monitor, after you select 'custom monitor' you will be faced with a list of about 10 video modes, but there will be the

Re: [newbie] M6 is trash

On 7 Jun, Bernhard Rosenkraenzer wrote: On Mon, 7 Jun 1999 [EMAIL PROTECTED] wrote: I asked for assistance on sound and scsi problems, got none, figured that one out eventually. Asked for assistance on Jaz locking up, got no response and it still does not work. The only reason you

Re: [newbie] 1600 x 1200 res

You might try running XF86Config from the command prompt. Just make sure you have root permissions when you do it. MIME:[EMAIL PROTECTED] on 06/07/99 10:20:07 PM To: [EMAIL PROTECTED] @ INTERNET cc: (bcc: Michael Thorp/NOTES) Subject: [newbie] 1600 x 1200 res From a console window I

Re: [newbie] Goodbye

Goodbye from me too --- Jeanette Russo [EMAIL PROTECTED] scritto: Thanks for all your help you have been a lot of help here Jeanette - Original Message - From: Steve Philp [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Monday, June 07, 1999 8:52 PM Subject:

[newbie] man errors

Hi, I've a problem with... --- man command --- [root@localhost /root]# man -c ls Formatting page, please wait... standard input:34: warning: can't find character with input code 232 standard input:51: warning: can't find character with input code 233 standard input:52:

[newbie] kernel ibcs

Hi, what is kernel-ibcs...rpm ??? While it's installed in ny system the kaudioserver hang in KDE (only for the kernels 2.2.7) Do you kwon that sox 12.15 don't work with sndconfig and SB64 PCI ensoniq 1370 ? bye, RAF _ Do You Yahoo!?

Re: [newbie] found the problem!!

Could I use this same solution to specify a particular System.map that I want to use? If so, what is the syntax? I have multiple kernels that I boot in to but each one has its own System.map. Although I can specify which kernel I want to boot in to within the LILO prompt, there does not seem to

[newbie] RealPlayer

I tried installing RealPlayer under Mandrake, however it won't work (even changed settings in Netscape)...any suggestions? -- -Scott "If you're not part of the solution, you're part of the precipitate."

[newbie] running apps in Mandrake 5.3 vs. Red Hat 5.2

Hi, I just got an application which the developers specify should be run under Red Hat 5.2. I've had Mandrake 5.3 installed on our Linux machines for a while now, and I was always under the impression that Mandrake 5.3 was exactly Red Hat 5.2 plus KDE. My problem is that I am unable to run

[newbie] Creative Vibra Sound Card Configuration

hi all anybody here knows how to configure creative vibra sound card to work under mandrake 6.0 ?...when i ran sndconfig it detect my card as ES1371 but the following message appear : The following error occurred playing the sample sox : Known effect : avg band chorus copy cut deepmh

[newbie] kppp in mandrake 6.0

hi all i still can't logging to internet using kppp dialer in mandrake 6.0...it works perfectly in redhat before i switch to mandrake 6.0 .anybody here facing the same problem ?...i'm using Merz 33.6 External Voice Modem... this is the error message : localhost pppd[1381] : pppd

[newbie] Upggrade

I upgraded from 5.3 to 6 and was amazed to see that everything seemed to be okay. KDE started up and all my apps were there and seemed to start okay. But my joy was premature. I cannot print at all (the process gets locked in the spool directory and nothing comes out of the printer)and

Re: [newbie] running apps in Mandrake 5.3 vs. Red Hat 5.2

On Tue, 8 Jun 1999, Hidong Kim wrote: I've had Mandrake 5.3 installed on our Linux machines for a while now, and I was always under the impression that Mandrake 5.3 was exactly Red Hat 5.2 plus KDE. Not quite. Mandrake 5.3 had a lot more applications than RedHat (XEmacs, klyx, licq, maxwell,

Re: [newbie] Creative Vibra Sound Card Configuration

On Wed, 9 Jun 1999, Pian wrote: sox : Known effect : avg band chorus copy cut deepmh echo echos flanger highp lowp map mask phaser pick polyphase rate resample reverb reverse split stat vibro sox : effect '/dev/dsp' is not known Not a problem with your soundcard, but with the sox package.

Re: [newbie] kppp in mandrake 6.0

Hi, I had a similar problem. The line localhost pppd[1381] : Hangup (SIGHUP) looks like some kind of pppd-timeout. I just edited the /etc/ppp/options file and removed the "lock", after that I checked the "lock device" box on the device tab. Also I unchecked the checkbox on the modem-tab

RE: [newbie] kppp in mandrake 6.0

Pian [[EMAIL PROTECTED]] said: this is the error message : localhost pppd[1381] : pppd 2.3.7 started by root, uid 0 localhost pppd[1381] : Using interface ppp0 localhost pppd[1381] : Connect: ppp0 --- /dev/ttys1 localhost pppd[1381] : Hangup (SIGHUP) localhost pppd[1381] : Modem hangup

Re: [newbie] New Mandrake user.

On Tue, 8 Jun 1999, Fernando Perez wrote: I did check with chkfontpath --list and I *do* have /usr/X11R6/lib/X11/fonts/ttfonts loaded properly. Also, the fonts.dir file *is* there, so I'm kind of puzzled as to why I can't see any of the fonts. Probably the installer didn't update xfs to the

Re: [newbie] Re: [expert] kernel ibcs

No it's not related with ibcs my kaudioserver become defunct (D) after I exit from kde and I can't kill him (all version of 2.2.9 I've to use 2.2.7) the error message is: /dev/dsp is a unkown effect --- Bernhard Rosenkraenzer [EMAIL PROTECTED] scritto: On Tue, 8 Jun 1999, Roberto Angelo

Re: [newbie] Re: [expert] kernel ibcs

No it's not related with ibcs my kaudioserver become defunct (D) after I exit from kde and I can't kill him (all version of 2.2.9 I've to use 2.2.7) the error message is: /dev/dsp is a unkown effect --- Bernhard Rosenkraenzer [EMAIL PROTECTED] scritto: On Tue, 8 Jun 1999, Roberto Angelo

Re: [newbie] Upggrade

I upgraded from 5.3 to 6 and was amazed to see that everything seemed to be okay. KDE started up and all my apps were there and seemed to start okay. But my joy was premature. I cannot print at all (the process gets locked in the spool directory and nothing comes out of the

[newbie] SAMBA again...

In the quest to get samba working, I have some how installed 2.0.4 and 2.0.3 - at least that is what KDE packager tells me.When I use KDE packager to uninstall I receive an error that reads something like multiple samba packages exist and it will not un-install. Is there a way to fix