hi frieds
can anybody tell me ,how do i configure email server(local) in
RH7.2 .i use kde
any help is precious
shyam
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
well, as I see it that is 2 stages.
stage 1 first stage bootloader loads, and executes.
stage 2 first stage bootloader loads second stage, and executes...
but its all a point of view. :)
at any rate quibling over this doesn't fix the problem :)
>From: Kevin Myers <[EMAIL PROTECTED]>
>Reply-To:
On Tue, 30 Jul 2002 04:49:11 +, Tom wrote:
>
>LI is LILO starting up.
>I don't know exactly where it dies, but the letters correspond to sections
>of the boot process. So, Lilo is dying after the second part of the boot
>process.
>[big snip, please don't overquote]
Not quite, according
Hi,
I have installed Redhat 6.2 on Compaq En model,
installation was fine, and i could also load the
network drivers. The network card is eepro100. when
the machine comes up, eth0 is ok, i can ping loopback
address but the leds on the network port doesn't
blink, result i cant ping outside machine
Hi,
does anybody know how to do (or configure) the RH7.2 server
for the following purpose:
there is an internal network (192.168.1.xxx) which is
masquaraded to the external network with 1 external IP.
I must make the server to work in such a way that some
internal computers (i.e. with internal IP
Well.. is there any way i can do it with ipchains?
- Original Message -
From: "Michael Fratoni" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 29, 2002 11:13 PM
Subject: Re: Iptables -- HELP
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On Monday 29 July 2002 11:5
On Mon, 2002-07-29 at 19:43, Dominic Constantin wrote:
>
> I'm newbie in linux and I had a request from my boss. So I need to know
> the number of the port of the HTTP2 service.
>
> I hope anyone understand and could help me because I'm confused a little bit.
So am I. Maybe you mean HTTPS? I
--- Begin Message ---
Dear List
I have a hardware raid problem, while my hardware engineers converted
from raid 3 to raid 5 , subsequently am unable to boot from my root
partition.
I did with rescue disk and tried to mount the root partition to recover
the data.. i am unsuccessful in doing
LI is LILO starting up.
I don't know exactly where it dies, but the letters correspond to sections
of the boot process. So, Lilo is dying after the second part of the boot
process. Somehow LILO is trying to boot, if the win2k drive is the only one
present I don't know, you might have acciden
hi,
I have implemented an IMAP folder on a Cyrus IMAP server on RH 7.2
what i want is that i want to allow users to add and only delete their
own items in this folder.
can anyone tell me how to give the permissions to this IMAP file so that
users are able to delete their own posting only
I have a small problem,
I have a 20GB root partition on a system.
it shows that only 6Gb are free, but the usage of all of the directories on
/ combined only adds up to about 7GB, so where are my other 7GB of disk
space?
_
Join
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 29 July 2002 11:54 pm, Roger wrote:
> dumb question time. If ipchains and iptables are mutually exclusive,
> why does Redhat default to both enabled? Or did I miss a check box...
> Or did I need to be a little more clueful there?
Both ar
Hello,
While i run jdk sound demo or my application, i get the below
exception, and i couldn't hear the sound while the sound file is
played.
javax.sound.sampled.LineUnavailableException : Audio Device
Unavailable.
But when i play the sound file individually i can hear the
sound.
Please let me
I have a Sony Tape Stacker attached to an adaptec 2940UW. When booting
it detected the medium changer and the tape drive. Also, if I 'cat
/proc/scsi/scsi' I get the following:
Attached devices:
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: SONY Model: TSL-A500CRev: L201
Type
Around Mon,Jul 29 2002, at 10:36, Michael Fratoni, wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
> On Monday 29 July 2002 10:27 pm, Jesse Angell wrote:
> > Wierd..
> > What does this all mean
> > /lib/modules/2.4.9-31/kernel/net/ipv4/netfilter/ip_tables.o: insmod
>
> Do you have any
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/20:38 -, Joe Giles <[EMAIL PROTECTED]> wrote:
>Do they, or another company, have a similer solution that works with MySQL?
>
>Just though Id ask...
Someone probably does, but the database part is really transparent. The
setup scrip
Hi everybody
I'm newbie in linux and I had a request from my boss. So I
need to know the number of the port of the HTTP2 service.
I hope anyone understand and could help me because I'm
confused a little bit.
Thanks in advance
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 29 July 2002 10:27 pm, Jesse Angell wrote:
> Wierd..
> What does this all mean
> [root@palaceunlimited /etc]# /sbin/iptables -A INPUT -s 24.72.17.31 -j
> DROP /lib/modules/2.4.9-31/kernel/net/ipv4/netfilter/ip_tables.o:
> init_module: Device
On Mon, Jul 29, 2002 at 04:56:29PM +0100, Nick Lindsell wrote:
> OK, fine - I was just trying to point out that there are two compilers on
> a rh7.2 box (which many folks are unaware of).
>
> But how about trying to use kgcc? It might be the fix and every time I've
> come across this parse error
Wierd..
What does this all mean
[root@palaceunlimited /etc]# /sbin/iptables -A INPUT -s 24.72.17.31 -j DROP
/lib/modules/2.4.9-31/kernel/net/ipv4/netfilter/ip_tables.o: init_module:
Device or resource busy
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IR
Oi vey! Is this stuff complex or what. I can't figure out this snmp
stuff. Any chance you could snatize and send me your configs? Any other
notes you can offer are appreciated.
chris
On Mon, 2002-07-29 at 20:33, Wesley Murphy wrote:
> MRTG - (multi router traffic grapher) is on redhat machines.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 29 July 2002 08:25 pm, Wesley Murphy wrote:
> RH has pop3 on it already.
It is not installed by default, however. You need to install the imap
package.
> Edit
> /etc/xinet.d/ipop3
>
> disbale=yes ---> disable=no
>
> Then run
>
> service
Seems like I hit a sensitive topic - goodie...
I use webalizer on all sites, well, all the important ones. But when the
server gets really busy, it doesn't help, I need to know what's being
looked at now so I can go and look at the logs in real time.
We host all our own sites, so there's no fina
On Mon, 2002-07-29 at 20:38, Jesse Angell wrote:
> I need to block an ip with iptables ASAP.. I want it to just drop the
> connection if they try to connect to ANYTHING on my server..
> How do i do this...
> help asap
iptables -A INPUT -s nn.nn.nn.nn -j DROP
Linus
___
On Tuesday 30 July 2002 1:38 am, Jesse Angell wrote:
> I need to block an ip with iptables ASAP.. I want it to just drop
> the connection if they try to connect to ANYTHING on my server..
> How do i do this...
> help asap
$EXTIF=your External network card (eth0,etc..)
$EXTIF_IP=your External IP a
Thanks Ed,
I forgot to mention that this machine is connected using a 56k modem. I'm not
expecting fast speeds, but I know it should be better than what it is atm.
Kevin
GreenKD Micro Software[EMAIL PROTECTED]
MP 107, Market City
I need to block an ip with iptables ASAP.. I want it to just drop the
connection if they try to connect to ANYTHING on my server..
How do i do this...
help asap
-
Thank You,
Jesse Angell
Founder, PalaceUnlimited.com
[EMAIL PROTECTED]
___
Why are you running fsck ? Did the system ask you to do so or were you just
experimenting ? You may want to umount that partition and then run fsck on it.
This should sort your busy errors. If you are coming from the Windows world this
isn't the same as a defrag or anything like that. You may h
Imap is a protocol just as pop3 is. If you use pop3 mail is taken off the server
and stored on your machine that you use to check mail. Now if you use Imap you
can then store or leave you mail on the server and wherever you go you just
access the server and you mail is there. With Pop3 you have
well i finally figured out how to run fsck
(kept getting device busy errors)
and i got the following very short input:
fsck 1.27 (8-Mar-2002)
e2fsck 1.27 (8-Mar-2002)
/dev/hdc1: clean, 31907/10010624 files, 16727577/20010808 blocks
is that good?
did it fix anything?
On Mon, Jul 29, 2002 at 04:10:25PM -0700, daniel wrote:
>
> i've never used it, but doesn't webalizer do the job? it should chart
> everything out for you as well.
Webalizer cannot tell the difference between virtual hosts.
You could setup a webalizer instance for every vhost and compare
the rep
MRTG - (multi router traffic grapher) is on redhat machines.
Investigate /etc/snmp/snmpd.conf for machine traffic monitoring.
Look up something called mod_watch for apache which will let MRTG draw nice
little graphs for the traffic going in and out of virtual hosts.
This will let you see busy v
ok
you've confused me already
is imap the same as pop3?
what are they?
why the different names?
aren't most email clients (outlook express etc) designed for pop3?
_
daniel a. g. quinn
starving programmer
a little science may take one away from God;
much science b
RH has pop3 on it already.
Edit
/etc/xinet.d/ipop3
disbale=yes ---> disable=no
Then run
service xinetd restart
and
telnet localhost 110
to check it.
I can't remember any exploits for pop3, I'm sure if you register your machine
with rhn.redhat.com and pay attention to it, you should be ok
On Tue, 2002-07-30 at 00:07, daniel wrote:
> i'm experimenting with compiling and configuring sendmail from source and i
> think i've actually got it working... problem is, i still can't grab my mail
> off my linux box from another machine. pop3 is needed for this right?
>
> what software is ever
You could also use Imap as that will leave mail on the server, you are using
Sendmail which works with mbx format mailboxes so you may want to use UW-Imap
server. I guess that they also bundle a pop server with it if I am not mistaken.
If you get adventerous and want to use Maildir formats to s
i've never used it, but doesn't webalizer do the job? it should chart
everything out for you as well.
_
daniel a. g. quinn
starving programmer
it could probably be shown by facts and figures
that there is no distinctly native american criminal class
except congre
i'm experimenting with compiling and configuring sendmail from source and i
think i've actually got it working... problem is, i still can't grab my mail
off my linux box from another machine. pop3 is needed for this right?
what software is everyone's favourite? all i've found is qpopper but
somet
I've had this dilemma forever. Here's what I've settled on . It doesn't
monitor traffic in real time but it's the next best thing.
There is a webserver log analysis program called wwwstat-2.0, download and
install it.
http://ftp.ics.uci.edu/pub/websoft/wwwstat/
I'm sure there are others that
In trying to diagnose a weird network problem (see earlier msgs to the
lists), I noticed that I'm sometimes getting redirects in responses to my
pings. The ones I've seen so far seem beneficial, but if they weren't how
would I know?
How do you see the effect of an accepted ICMP redirect? The ro
I use iptraf to see what connections are on my server, but ther is no
way to know what websites are getting traffic. Previously I put a second
log entry into every virtual host and monitored that, but it put too
much load on the server to write to another log.
Is there any monitoring utility that
i think you are correct.
as soon as i get home i will try the fix.
Thank You.!!
eric
every passing minute is another chance
to turn it all around.
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, July 29, 2002 2:21 AM
Subject: [RHL] RE: changing scsi
Thanks for the input Jim...I'll give the perl script a go tonight. AE
-Original Message-
From: Jim Bowen [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 29, 2002 8:51 AM
To: '[EMAIL PROTECTED]'
Subject: RE: Automated entry of e-mails into database?
Yeah. the mail is piped as the stan
NFS uses a trust-based security model. It's logically incompatible with
hosts that you don't "trust". If your remote hosts must allow users you
don't trust to access the root account, then don't use NFS.
On Mon, 2002-07-29 at 08:56, Avrahami David wrote:
> Right but some of them need root acce
Do they, or another company, have a similer solution that works with MySQL?
Just though Id ask...
Thanks
Joe Giles
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 29-Jul-2002/08:46 -0400, Adam Ellis <[EMAIL PROTECTED]> wrote:
> >I am trying to come up with a system that will allow m
There's nothing to configure... it does it all internally. Just plut
your box into the Linksys.. either use DHCP or static IP and away you
go!
Anthony
On Mon, 2002-07-29 at 16:14, Sweet Chuck wrote:
>
> I just bought a linksys 4 port DSL router/gateway that supposedly does
> NAT (on the box i
I recently moved a Proliant 1600R from RH6.2 to RH 7.2. The
installation went very smoothly (nice job RH). Using RH Network, I
upgraded to RH 2.4.9-34smp.
Then, I started to check things out. It appears that this box (a Dual
500 MHZ box) is not recognized as an SMP machine. Both processors
I just bought a linksys 4 port DSL router/gateway that supposedly does
NAT (on the box it says it does). I just spent 1 hour digging through
every menu and see no way to configure NAT.
Question regarding the Linux firewall project. Can a Linux firewall
support most of the features of the PIX
Heh, all of this reminds me of last week, while I was setting
up a webserver.
I thought (briefly) about adding a user named web. and this
is (as best I can recall) what my fingers typed, with a bit of
commentary.
[ratbert ~] adduser -d /var/www/http web
(added user, let RH figure out what
Title: problem with NIS
Right
but some of them need root access for some reasons such local database
installation
-Original Message-From: Jim Bowen
[mailto:[EMAIL PROTECTED]]Sent: Monday, July 29, 2002 17:27
To: '[EMAIL PROTECTED]'Subject: RE: problem with
NIS
Easy, d
At 11:12 29/07/2002 -0400, you wrote:
>On Mon, Jul 29, 2002 at 01:15:49PM +0100, Nick Lindsell wrote:
> > At 07:24 29/07/2002 -0400, you wrote:
> > >I don't understand how that could be my problem because I just
> > >successfully compiled the kernel with the same compiler (gcc-2.96-85)
> > >I'm us
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/12:24 -0500, Ed Wilts <[EMAIL PROTECTED]> wrote:
>On Mon, Jul 29, 2002 at 06:46:13PM +0800, gary wrote:
>> How to send an email in command line, where can change sender name???
>>
>> eg. mailx -s
>
> mail -s "backup log" ewilts
That
Title: problem with NIS
This
is actually a problem with NFS. I used to be under the
assumption it was a NIS problem too.
One
solution is to restrict the NFS exports to machines you can trust, and then
restrict root on them. This is of course not the best solution, but it
would give y
Robert,
Are you saying it logs straight into a prompt? Or goes to text login:
rather than graphical?
If it's the latter, edit /etc/inittab
id:3:initdefault:
Change the 3 to a 5 and save.
If it's the former, we'll need to look further.
--jeremy
On Mon, 2002-07-29 at 08:38, Robert Gubbins wro
Jeremy:
Jeremy Hogan wrote:
> Matt,
>
> Does this happen at the same point while finding packages? Or generally
> w/i that phase?
Happens at the same point as far as the granularity of the display
information
on the virtual consoles permits me to detect.
>
>
> Have you tried another install me
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/11:09 -0400, Chris Worth <[EMAIL PROTECTED]> wrote:
>I'm building a new server, and a higher up wants to make sure the server
>has a server class nic in it. he's hot on the 3com 3CR990SVR95. I don't
>see it on the list and the specs d
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/08:46 -0400, Adam Ellis <[EMAIL PROTECTED]> wrote:
>I am trying to come up with a system that will allow me to take incoming
>e-mail messages and enter key fields into a database. So, for example, all
>e-mails to [EMAIL PROTECTED] will
On Mon, Jul 29, 2002 at 10:26:03AM +0800, Kevin - KD Micro Software wrote:
> Hi all,
>
> I have what I think is a strange problem. I have a 7.2 box on the net, and has a few
>server processes running. Whenever I access the machine remotely, the connection
>itself is almost instant, but then is
Hi Chris...
What's the server for and do they want the server class nic for a
particular feature, or just because they are going to get (or think
they will get) higher performance?
Drivers for this 3com card can be found at:
http://support.3com.com/infodeli/tools/nic/linuxdownloads.htm
They hav
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/03:38 -0700, Stand H <[EMAIL PROTECTED]> wrote:
>Hi,
>I can't use ipchains with redhat 7.2.
>When I use it I got a reply like the kernel is not
>compartible with ipchains. I can use iptables but I
>wonder why the ipchains is available b
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/22:38 +1000, Robert Gubbins <[EMAIL PROTECTED]> wrote:
>Hello
>
>I am running Redhat 7.2 and I have been modifying my local area network
>configuration using neat.
>
>Now when I reboot, it comes to the localhost login prompt and stops
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/18:46 +0800, gary <[EMAIL PROTECTED]> wrote:
>How to send an email in command line, where can change sender name???
>
>eg. mailx -s
The mail/mailx command does not allow that.
You can build a message in a file and pipe it to sendmai
Matt,
Does this happen at the same point while finding packages? Or generally
w/i that phase?
Have you tried another install method or media, just to eliminate that?
Can you look on the virtual terminals to see if the same last few lines
appear before the panic each time?
--jeremy
On Mon, 20
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/11:35 +0200, paal <[EMAIL PROTECTED]> wrote:
>Have som old computers installed in the library for public searching in
>the database. I use the rh 7.0 It is a stripped installation, none of
>the screensavers were installed. So after 10
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/19:18 +1000, Robert Gubbins <[EMAIL PROTECTED]> wrote:
>
>Prior to configuring my local area network, I was able to access the WWW
>using Netscape. My dialup connection appears to be correct and nothing has
>been changed in that area.
On Mon, Jul 29, 2002 at 06:46:13PM +0800, gary wrote:
> How to send an email in command line, where can change sender name???
>
> eg. mailx -s
mail -s "backup log" ewilts
--
Ed Wilts, Mounds View, MN, USA
mailto:[EMAIL PROTECTED]
___
Redhat-list
I open word and excel files with Star Office quite often. I don't know
about 'large' files, but just small files seems to work fine for me.
Jon
On Sun, 28 Jul 2002, Jim Hale wrote:
> How about StarOffice? Anyone have experience with that? :)
>
> We were looking at the possibility of using it
I remembered seeing this before so I did a fast search
http://lppcfom.sourceforge.net/fom-serve/cache/91.html
Linda
On Mon, 29 Jul 2002, paal wrote:
> Hi
>
> Have som old computers installed in the library for public searching in
> the database. I use the rh 7.0 It is a stripped installation, n
On Mon, Jul 29, 2002 at 01:15:49PM +0100, Nick Lindsell wrote:
> At 07:24 29/07/2002 -0400, you wrote:
> >I don't understand how that could be my problem because I just
> >successfully compiled the kernel with the same compiler (gcc-2.96-85)
> >I'm using to compile lm_sensors.
>
> Not quite. On l
Read the initial post. Yes, i changed lilo.conf, yes
i ran lilo, and i put in details about these changes
and what happened when i selected the windoze option
from the lilo menu for each change i made to
lilo.conf.
Next, I suppose I'll try grub, but I'm very concerned
that windoze won't even boo
These lines take care of windoze need to be first:
map-drive = 0x80
to = 0x81
map-drive = 0x81
to = 0x80
and this line actually takes care of the above lines,
so including both would be the same as including
neither i believe:
loader=/boot/os2_d.b
--- "Rev. David P. Giffen" <[EMAIL PROTECTED]>
Title: problem with NIS
Easy, don't allow them root access.
-Original Message-
From: Avrahami David
[mailto:[EMAIL PROTECTED]]
Sent: 29 July 2002 15:24
To: 'redhat-list'
Subject: problem with NIS
Hi,
The problem is when the user login
as root in his machine he get acce
Title: problem with NIS
Hi,
The problem is when the user login as root in his machine he get access to any other NIS user home directory he wants to by "su - " without typing any password.
I know that it's a big hole in security caused by NIS but I don't know how to fix it.
Any idea?
TIA
I'm building a new server, and a higher up wants to make sure the server has a server
class nic in it. he's hot on the 3com 3CR990SVR95. I don't see it on the list and
the
specs don't list Red Hat. will this work with another 3com driver? or do I need to
substitute?
thanks.
chris
_
Folks:
I would like to get some assistance on a problem I have been
working through for a couple of weeks now. I am trying to
upgrade a Tyan BX S1832DL Tiger 100 (Intel 440BX AGPset)
based system from 7.2 to 7.3 I get a kernel panic while the
installation is "Finding packages".
I was originally
During porting from solaris to linux, what is the
equivalent to file in solaris nss_common.sh in the
linux system. This file basically has functions named
nss_search, nss_delete etc...
Please help.
Unix User
__
Do You Yahoo!?
Yahoo! Health - Feel
Dear List
I have a hardware raid problem, while my hardware engineers converted
from raid 3 to raid 5 , subsequently am unable to boot from my root
partition.
I did with rescue disk and tried to mount the root partition to recover
the data.. i am unsuccessful in doing so as the root partition
Iptables and Ipchains are both off. Route -n config is below. Also, this
will be fine for a day, then suddenly stop working for one address, even
though specifying -I eth0 causes it to work.
[root@enterprise root]# /sbin/route -n
Kernel IP routing table
Destination Gateway Genmask
Yeah. the mail is piped as the standard input to the program. $1 refers
to the first parameter
Try something like
#!/usr/bin/perl
open OUTPUT_FILE, ">> /tmp/msg";
while ($line_of_text = <>) {
print OUTPUT_FILE $line_of_text;
}
close OUTPUT_FILE;
which will take the email line by li
I am trying to come up with a system that will allow me to take incoming
e-mail messages and enter key fields into a database. So, for example, all
e-mails to [EMAIL PROTECTED] will be pulled apart and fields like
Problem Description, Date, Priority, etc. will be pulled out of the message
body an
Hello
I am running Redhat 7.2 and I have been modifying my local area network
configuration using neat.
Now when I reboot, it comes to the localhost login prompt and stops looking
for a login. This is a new situation, previously it went straight into the
Xwindow login prompt.
What have I done
Hello All.
I am sharing a folder on my Linux server between a Mac and a Windows machine
using Netatalk and Samba. Some users are not aware of the 25 charachter
limit on filenames on a Mac and so some of the files generated on the
windows machines are not visible on the Macs. Is there a way to for
At 07:24 29/07/2002 -0400, you wrote:
>Here's the response I got from the lm_sensors folks:
>
>"You must have some incompatibility between your kernel headers and
>your gcc or libc headers.
>
>"Sorry, it will be quite difficult for us to diagnose it for you.
>
>"If you figure it out email us, ref
Is this a stock 7.2 kernel? If so, try issuing the following command and
see if your iptables commands work:
echo 1 > /proc/sys/net/ipv4/ip_forward
AE
-Original Message-
From: Stand H [mailto:[EMAIL PROTECTED]]
Sent: Monday, July 29, 2002 6:39 AM
To: [EMAIL PROTECTED]
Subject: ipchains
Hello
I am running Linux 7.2.
Prior to configuring my local area network, I was able to access the WWW
using Netscape. My dialup connection appears to be correct and nothing has
been changed in that area.
I configured my local area network using neat, giving my local machine an
address of 198.
Hi, all.
I am running Redhat 7.1 and just compiled kernel 2.4.18, in part so
that I could run lm_sensors (I was running kernel 2.4.13-ac8 which I
compiled myself, and didn't compile it with I2C support). Since you
have to have an lm_sensors compiled for your exact kernel version, I
downloaded th
On Mon, Jul 29, 2002 at 06:46:13PM +0800, gary wrote:
> Dear all,
>
> How to send an email in command line, where can change sender name???
>
> eg. mailx -s
>
> How to specify sender address? or it could use other like elm or...
>
mailx -s subject to-add
From: [EMAIL PROTECTED]
nope this d
On Mon, Jul 29, 2002 at 06:46:13PM +0800, gary wrote:
> Dear all,
>
> How to send an email in command line, where can change sender name???
>
> eg. mailx -s
>
> How to specify sender address? or it could use other like elm or...
>
mailx -s subject to-add
From: [EMAIL PROTECTED]
message body
On Mon, 29 Jul 2002 at 3:38am (-0700), Stand H wrote:
> Hi,
> I can't use ipchains with redhat 7.2.
> When I use it I got a reply like the kernel is not
> compartible with ipchains. I can use iptables but I
> wonder why the ipchains is available but can not be
> used.
> Do I have to do something
Hi folks,
Is there ANY sign of an 802.11a driver at all. The best I found is one chap working
on one, however, at the moment it seems to be at the stage of just a shell module to
test loading/unloading and whether it can see the card (can't remember the address).
I have one of the original SM
Dear all,
How to send an email in command line, where can change sender name???
eg. mailx -s
How to specify sender address? or it could use other like elm or...
Please help to advise...
Many thanks!
gary
___
Redhat-list mailing list
[EMAIL PROT
Hi,
I can't use ipchains with redhat 7.2.
When I use it I got a reply like the kernel is not
compartible with ipchains. I can use iptables but I
wonder why the ipchains is available but can not be
used.
Do I have to do something before using ipchains?
Thanks,
Stand
_
Hello,
While i run jdk sound demo or my application, i get the below
exception, and i couldn't hear the sound while the sound file is
played.
javax.sound.sampled.LineUnavailableException : Audio Device
Unavailable.
But when i play the sound file individually i can hear the
sound.
Please let me
Hi
Have som old computers installed in the library for public searching in
the database. I use the rh 7.0 It is a stripped installation, none of
the screensavers were installed. So after 10 minutes the screensaver
function in X turns on, with a black monitor. I have tried to find
options for
Hello Friends,
I do not know if this is the right forum for discussing this,
I want to write a USB system with device driver for handling a single device
i.e. a printer.
what I know that, in Linux all devices are treated as file and you have to
register the driver and link it to /dev using regis
As a few people have mentioned, you _can_ install and run Win2k on a
non-primary drive, likewise linux, and many other Win version. The key word
there though was _install_.
Modern OSs i.e. Win2K, linux, don't use the bios to talk to the disks once
they are loaded, they talk directly to the hardwa
On Mon, 29 Jul 2002, suresh wrote:
> hi
> thanx for yur reply
> I tried this before attempting cron
> but the hang problem was there too.
> if only get this one straight ..nothing like it
Oh, and I neglected to mention that you may have to put your script in the
background when you call it
hi
thanx for yur reply
I tried this before attempting cron
but the hang problem was there too.
if only get this one straight ..nothing like it
Thanx in advance
Suresh
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED]
Sent: Monday, J
I had a problem like that with two cards (sound and network)
I tried a lot of things (the configuration worked fine in windows), even
assigning irq's and io's because i saw that one of the cards couldn't get
the config it expected (btw i posted messages asking why isapnp could not
force some valu
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 29-Jul-2002/11:55 +0530, suresh <[EMAIL PROTECTED]> wrote:
>basically i am having a script which needs to be run after 5 mins of
>bootup(since the script hangs if run during bootup).
>I am doing this by adding a dynamically configured file in cron.
1 - 100 of 101 matches
Mail list logo
