Re: Linux command to combine two files

On Fri, 15 Aug 2003, Aung Min Naing Oo - Unidux (IT) wrote: > Hello > > Is there any command to combine two text files. > I need to combine the multiple access log files to > one single file for the report generating purpose. > > eg. FileA > line 1 > line

Linux command to combine two files

Hello Is there any command to combine two text files. I need to combine the multiple access log files to one single file for the report generating purpose. eg. FileA line 1 line 2 FileB line 3 line 4 Res

Thinking of switching to Linux (from Mac!) and have a fewquestions

I am seriously thinking of switching from Mac OS X to Linux for several reasons. One is I just don't like being "captive" completely to one company for all my hardware and software. I like the freedom and choice available in Linux. Another is I have been having serious problems with Apple hardware

Broken sound

Hey, Whenever my system tries to use sound it freezes for 5-10 seconds and eventually I get console output: [EMAIL PROTECTED] kbreit]# redhat-config-soundcard /lib/modules/2.4.20-8/kernel/drivers/sound/trident.o: init_module: No such device Hint: insmod errors can be caused by incorrect m

Re: read changes up2date makes to rpm db

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Tue, 5 Aug 2003 17:21:48 -0400, [EMAIL PROTECTED] wrote: > Have lots of boxes and not sure the difference between what up2date has changed and > the default build. How can I tell > Looking at /var/log/up2date as well as the output of rpm --qu

Minimizing windows

Hi all, In my quest to figure out this new RH9, I have one other question I hoped someone could help with. I noticed that alt-tab can be used to change between windows, but where do minimized windows go? Once their minimized, how can I select them without having to alt-tab through them? They don

Problem with an installation of Lucent internal modem ...

I'm using RH 9.0 (2.4.20-8)   As far as my default state of a system after installation have not detected and installed my lucent internal modem (Microelectronics 56K internal /L) I had to find correct linux drivers for my exact version of kernel. I did it well.   The problem appeared after

Re: How to upgrade my main HD?

I just did this a week or so ago. The way I did it was this: 1) Put the new hard drive in as a slave. 2) Used parted to create the filesystem. (parted also has the ability to copy a filesystem but I couldn't get this to work) 3) Copy the file system with the cp command. I can't remember if I

Re: Getting results from maillog

If you can use exim as your MTA (or hack the script to use Sendmail), then here is an MRTG tool for you: http://download.cheetaweb.com/mrtg-2.9.17-1cpanel.i386.rpm (I've installed it on plain boxes before, and it works just the same as on a cpanel box) -- Jonathan - Original Message - F

RE: Xvnc server.

I will try to describe what I did and I will appreciate any help. 1 add an entry in /etc/service port 5960 2 create a file on /etc/xinetd.d/ 3 open XDMCP on kdmrc and gdm.conf 4 start vncserver on init level 3 ( I don't know if it is needed ). when I start vnc client on my PS WINXP I get an wind

Re: Thinking of switching to Linux (from Mac!) and have afewquestions

On 8/7/03 10:00 AM, "Michael Gargiullo" <[EMAIL PROTECTED]> wrote: > > On Wed, 2003-08-06 at 18:46, Doug Lerner wrote: >> On 8/7/03 2:03 AM, "Hal Burgiss" <[EMAIL PROTECTED]> wrote: >> >>> On Wed, Aug 06, 2003 at 06:41:34PM +0900, Doug Lerner wrote: >>> display projector. This is trivially

Re: Dependencies problem!

On Mon, Aug 04, 2003 at 08:43:44PM -0500, Paul Fabre Jimenez wrote: > > How can i restore the original dependencies and make my linux box work > again without a complete reinstallation? Do a custom upgrade, and deselect whatever packages you don't want to re-install. Make sure your backups are up

set system defaults for login & password

I'd like to have logins locked out after 3 invalid attempts to enter a server. I would also like root to be notified by email when this occurs. I would like this to be a system wide default. I have found the password aging chage cmd which should allow me to force a user to change a pa

Re: Xterm and other questions

if you check man xterm you can see that that are some commandline options for the things you need to configure -- Nurullah Akkaya [EMAIL PROTECTED] Registered Linux User #301438 What lies behind us and what lies before us are tiny matters compared to what lies within us. "If at first an i

Re: Wireless PC Card

I'm using the Belkin FSD6020. It works great actually and is Prism2-based. <> -- Original Message --- From: Keith Morse <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Sent: Wed, 6 Aug 2003 15:42:26 -0700 (PDT) Subject: Re: Wireless PC Card > On 6 Aug 2003, Jason Dixon wrote: > > > FW

Re: New RH9 user

> The version compiled for redhat 8 downloadable from > the mozilla ftp site > works for me, even with ximian installed (though I > havent checked if it > messed galeon...) It has the same problem as the RH9 from rawhide -- it spontaneously evaporates from the screen, such as what might happen if

RE: Ethernet & DHCP Fails on Cable Modem to Internet

> -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Ken Plumley > Sent: Thursday, August 07, 2003 2:31 PM > To: [EMAIL PROTECTED] > Subject: RE: Ethernet & DHCP Fails on Cable Modem to Internet > > > > The MAC address was added when I selected Bind

ftp server problem solved

Hi. Just thought everyone might like to know I did get my FTP problem solved, and I didn't have to change my file permissions. Aparently the problem I was having was just with Vsftpd. I switched my server to Proftpd and everything works as I originally expected. Files can be owned by my nor

Fujitsu Amilo with redhat

Title: Fujitsu Amilo with redhat Hi all, I'm looking for a laptop such as a Fujitsu Amilo D7820 or D7830. Is anybody running Redhat 9 on them ? If so what's your experience?. Thanks Eduardo

Re: Thinking of switching to Linux (from Mac!) and have a few questions

Japanese support in RedHad is pretty good (IMHO). Just make sure you include it at install time. If you have specific problem related to Japanese I suggest checking out the Tokyo Linux Users Group. http://www.tlug.jp There is a link to mutilingualization there or even better you could check

bugzilla down?

Anybody else able to connect to bugzilla? Cheers, Sean -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list

Re: user management with ldap

On Tue, 2003-08-05 at 22:23, Larry Brown wrote: > I have set up an LDAP for system authentication using OpenLDAP on RH8 server > with RH9 workstations. I have it working to validate user information, > however, when users log onto the machines there is no home folder for them. > Is there any refer

RE: Ethernet & DHCP Fails on Cable Modem to Internet

Starting to sound like a deaf NIC. Did you try to swap it out yet? -Original Message- From: Ken Plumley [mailto:[EMAIL PROTECTED] Sent: Thursday, August 07, 2003 2:23 PM To: [EMAIL PROTECTED] Subject: RE: Ethernet & DHCP Fails on Cable Modem to Internet Jason, When I set eth0 to activa

Antwort: Re: VSFTPD - Configuration question

Yes, but I just want to use the feature that I can specify different umasks for different directories. And I want to prevent users from uploading files with specific names (e.g. starting with a dot ".") Thomas

Mouse sensitivity.

I have just bought myself (and my laptop) a small gift: a USB Microsoft Notebook Optical Mouse (it is replacing a 15 years old antique, which I'm still storing away in some safe place for museum purposes...). Installation went fine: "kudzu" recognized the new "kid in town" and properly configured e

RE: SMTP AUTH -- Need help!

Thanks for the help. I have the changes made in the sendmail.mc file, and ran a make -c /etc/mail. Unfortunately, it's still not working. Here is a snip from my maillog: Aug 7 12:01:26 atlas sendmail[25486]: h77G1Nsg025486: ruleset=check_rcpt, arg1=<[EMAIL PROTECTED]>, relay=194.sub-166-180-2

Re: How to upgrade my main HD?

Thanks ALL for helping, I'll get hands on this issue next weekend! Andre, there are no unnecessary comments, all tips are valid because is always a good idea to have more than one aproach to a problem. Thanks! :) Peace out, = Sergio Espinoza Dien [EMAIL PROTECTED]

Re: VSFTPD - Configuration question

> there are the > configuration directives "path-filter" which allows to specify which > file > (names) can be uploaded by the ftp users and "upload" by which I can > specify who > can upload to which directory and set different umasks for different > directories. > > Does VSFTPD support this in a

RE: Ethernet & DHCP Fails on Cable Modem to Internet

> > Ken, > > Maybe you've already tried this, but my cable modem has a "feature" > which requires it to be reset every time a new device is plugged > into it. > > -Steve > different ken here, BTW - that feature is called ARP,Address Resolution Protocol, the cable modem has learned the e

Re: Deleting Zombie Process

> Uhm, does not look like I made your day No, I was complaining about Sun Support employees not knowoing about Zombie processes. It's not something that's focused on in books, but someone who works support at Sun should know better. > [EMAIL PROTECTED] root]# ps aux | grep 27440 > root

Re: VSFTPD - setting up acceptable logins

On Thu, 07 Aug 2003 13:33:58 +0100, Jon Slack wrote > Hi. > > Can anyone tell me (in plain English) how I can tell VSFTPD who CAN > log in? I've found two files that tell it who cannot log in, but > that doesn't really help See /etc/vsftpd.user_list # vsftpd userlist # If userlist_deny=NO,

Wireless PC Card

I was wondering if anyone had any particular recommendations or suggestions about suitable wireless cards to use with Red Hat 9. Thanks in advance Richard Worwood -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://

Windows Sharing Printer

Hi all I am new comer to Redhat Linux, I have redhat AS 2.1 on my PC. I want to share my printer (epson stylus) which is installed on my other PC (Windows 98), so that I can print from my Linux PC. Let's assume the detail are : My windows PC : computer name : zeta printer name : epson my windows u

Re: IP CHAINS on Red Hat Linux 7.1

On Thu, 2003-08-07 at 07:11, Willem van der Walt wrote: > I am not that sure mysellf, but you need to load two modules like this: > modprobe ip_nat_ftp > modprobe ip_conntrack_ftp > and then ftp connections works correctly. > Other members on this list is better qualified than me > to tell you exac

Re: udp port 624 listening?

On Thu, 07 Aug 2003 08:13:41 -0700, Gordon Messmer wrote > Mike Vanecek wrote: > > Portmap is stopped > ... > > [EMAIL PROTECTED] root]# rpcinfo -p > > rpcinfo: can't contact portmapper: RPC: Remote system error - Connection refused I do not want portmapper running. I just want to know why xinetd

Re: usb flash drive

The flash cards are likely formatted fat32 (vfat) mount /dev/sda1 /mnt/MOUNTPOINT should automatically pick the fs type for you. If not, add a -tvfat to the mount command. On Thu, 2003-08-07 at 11:01, Sachintha Karunaratne wrote: > hi, > i recently bought a usb flash drive. > i want to use it

Re: Can't play video DVD

On Thursday 07 Aug 2003 22:18, M. Parcheur wrote: > After installing RH9 I tried Xine and was unable to see a film on DVD. > I installed Ogle and videolan and mplayer. Nothing works properly. As i'm > far from an expert, evidently there are some errors in the soft > installation: liddvdread ? libdv

upgrade to Shrike Qs

Hiho, This will be my first upgrade of RH ever. Three questions: 1) Nvidia Will the file /etc/X11/XF86Config get overwritten? If not, do I need the src iso to get the src kernel to install the driver? (To install the driver for updated kernels, I needed a src kernel -- but not for the orgini

RE: SMTP AUTH -- Need help!

On Thu, 7 Aug 2003, Christian Campbell wrote: > Thanks for the help. I have the changes made in the sendmail.mc file, and > ran a make -c /etc/mail. Unfortunately, it's still not working. Here is a > snip from my maillog: > > Aug 7 12:01:26 atlas sendmail[25486]: h77G1Nsg025486: ruleset=chec

OT: More Novell / Linux News

http://news.com.com/2100-7252_3-5060413.html?tag=fd_top -- Cliff Wells, Software Engineer Logiplex Corporation (www.logiplex.net) (503) 978-6726 (800) 735-0555 -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list

Re: suspect lastlog?

On Sat, 2003-08-09 at 00:45, Herculano de Lima Einloft Neto wrote: > >Thanks for your quick replies.. yes I do have these users.. like I > said, I'm a newbie and it seemed to me that my daily su's should count > as a lastlog.. and all those users who don't exist.. Sorry. I've been > looking th

Re: Thinking of switching to Linux (from Mac!) and have a few questions

At 02:41 AM 8/6/2003, Doug Lerner, had this to say : I am seriously thinking of switching from Mac OS X to Linux for several reasons. One is I just don't like being "captive" completely to one company for all my hardware and software. I like the freedom and choice available in Linux. I too find th

Re: udp port 624 listening?

On Thu, 07 Aug 2003 15:07:42 -0700, Gordon Messmer wrote > Mike Vanecek wrote: > >>>[EMAIL PROTECTED] root]# rpcinfo -p > >>>rpcinfo: can't contact portmapper: RPC: Remote system error - Connection > ... > > The suggestion to look at rpcinfo, rpc, and portmapper really has no relevance > > to the i

Re: How to convert ext2->ext3

On Fri, 08 Aug 2003 19:19:36 -0600 [EMAIL PROTECTED] wrote: > I know that when Ive loaded a new RH distribution Ive been given > the option of converting my ext2 fs to ext3. I didnt do it > then, but Im ready now. > > However, scanning /sbin, /usr/sbin, /bin, /usr/bin for something > with 'ext3'

Re: Problem when transfering postgresql data folder

On Fri, 2003-08-08 at 05:12, JImmy NGu wrote: > I've tried to backup the database in a postgresql server by copying > the folder /var/lib/pgsql/data, and i transfered the folder to another > server's /var/lib/pgsql/ folder and try to initialize postgres. But > there seems to be a problem. > > > _

RE: Kernel panic after adding memory

> Not all memory work in all machines. The 128 you added maybe > wrong for your machine. Parity, no parity, oem,...etc. Check > with the manufacturer to see what kind of memory you need True. They were closed when I got home this evening. I plan on calling them tomorrow. It came from PC B

RE: OT: Apache blocking

Sean Estabrooks on Friday, August 08, 2003 4:57 PM said: > yes... that's the emulate a browser part. :o) Ok. That's sort of what I thought, but I just wanted to make sure. >>> URL: any... >> >> That's not what I meant by URL. > > Sorry, i'm still not sure what y

RE: Spreadsheet program?

Scalc (comes with OpenOffice) works good. > -Original Message- > From: David Hart [mailto:[EMAIL PROTECTED] > Sent: Thursday, August 07, 2003 12:33 PM > To: Redhat General List > Subject: Spreadsheet program? > > > There MUST be something better than KSpread. Any suggestions? > > > --

Re: Man pages display is not proper in telnet window.

Title: Message Great ! that really worked for me   Thanks barry ...thanks alot...   Binay     - Original Message - From: Barry Johnson To: [EMAIL PROTECTED] Sent: Friday, August 08, 2003 6:50 PM Subject: RE: Man pages display is not proper in telnet win

Re: Unable to login

On Thu, 2003-08-07 at 15:41, Sameer Sharangpani wrote: > I have a redhat linux 7.3 box. The machine has stopped accepting the > Username and Password. The machine is having GRUB boot loader > installed. > > My Questions : > 1. How can login to the machine. > 2. How to login in single user mode

RE: Rpm broken?

On Fri, 2003-08-08 at 11:00, [EMAIL PROTECTED] wrote: > > With just one underscore in front of "db*" it won't work. > > My bad. That took care of it. Thanks! > > > Apart from that it's "rm", not "Rm". > > Unfortunately, I'm forced into using outlook at work and it feels the > need to capitalize

RE: Ethernet & DHCP Fails on Cable Modem to Internet

Steve, Yes, I tried unpluging and reseting the cable modem too. It still dosen't work. Ken --- "Rigler, Steve" <[EMAIL PROTECTED]> wrote: > Ken, > > Maybe you've already tried this, but my cable modem > has a "feature" > which requires it to be reset every time a new > device is plugged > int

Re: usb flash drive

Ben Hall wrote: The flash cards are likely formatted fat32 (vfat) Just to interject - they are usually NOT FAT32, rather FAT12 - some are FAT16 but I've never seen a FAT32 one. Reason being that their capacities are SO SMALL, that FAT16 or FAT32 are way too wastefull on overhead. FAT12 is

Re: I need WAV editor, with some basic features? Where can I getone?

On Thu, 2003-08-07 at 16:18, Apollo (Carmel Entertainment) wrote: > I am looking for a good easy WAV editor. I have RH9 and I am aving problems with > some packages I found, since RH9 has newer stuff that is not recognized. > Any suggestions? Have you tried Audacity? http://audacity.sourceforge.ne

Media in RH9

Hello everyone: I just joined and I have a question about RH9. I'm using that distro in my laptop (IBM T30, Pentium 4, 768MB Ram). When I use applications such as Xine, Cinelerra, Xmovie, etc and when I load a movie and try to change the volume or fast-forward or whatever I do with the graphical

Re: Mailing list manager: Mailman and majordomo

Thanks for your input. Speaking of docs for mailman, I found the web site pretty bare as far as documentation is concerned. Any idea where I can find more info on another web site? Also, I noticed I can install mailman via RPM, but where are the config files I would need to edit to create my ma

Re: what is sgi-fam used for on the default instal anyway?

On Thu, 2003-08-07 at 21:19, Gordon Messmer wrote: > Bret Hughes wrote: > > > > What is it used for on the default install. IIUC fam is used to monitor > > the status of files and if changed do something. Is there some desktop > > sort of deal that this is used for? > > Yeah, the file manager

How to choose between ip 2 identical ethernet cards

I have a Dell 8200 laptop and a docking station, both with 3c905C ethenet chips. I wish to use the 3c905c internal to the docking station when the system is docked. Otherwise the 3c905c internal to the 8200. In my office I would like to run with both eth0 and eth1, but I need to be able to conne

Homemade Cluster, anyone?

Hello, I'm trying to find out if there are any good links out there on how to make your own server cluster setup using just the tools provided in RedHat Linux, or other open source applications? Thanks, Jonathan -- Jonathan M. Slivko - [EMAIL PROTECTED] "Linux: The Choice for the GNU

Unsual idea..

Guys... I've had an idea for a "play project" I can work on at home in my spare time.. but before I start on it I need a few ideas.. Can anyone come up with a theory on how to "convert an mp3 into a number"? I know that sounds weird so I'll explain what I mean... Imagine converting an mp3 into a

problem with down arrow

hi i am venkat i am using red hat linux 8.0 version in my system.i am facing a problem with down arrow key. when i push the down arrow key to scroll down in a page, instead of scrolling down the page i am getting a screen asking to save the screenshot.the screen i s asking fo

Re: Linux Forums

On Thu, Aug 14, 2003 at 06:58:45PM -0700, Simran Hansrai wrote: > I am new to linux and was wondering if there are any linux based free > forums that I can use? I am looking for something for work that we > can post known issues on and shift handovers.. any suggestions would > be grately appreciat

Re: Mounting fat32 partitions

here's what i have in my fstab : /dev/hda5 /mnt/windows1 vfat auto,owner,users,umask=000 0 0 HTH, -vivek -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list

Re: Unsual idea..

Here's one that's kinda Linux related Has anyone ever play with LCDs and Linux? I'd like to tinker with a small kernel, an LCD panel, a wireless NIC, speakers, and a decent hard drive to create a wireless jukebox. I've poked around on some LCD project sites, and it seems relatively simple, b

Problem with network printing on RH 8.0

Hi All, I can't printover the network. When I submit a print job I get the following error [EMAIL PROTECTED] root]# lpr [EMAIL PROTECTED] -- /home/phil/3465317ExtremePerformanceTuning.pdf Status Information: sending job '[EMAIL PROTECTED]' to [EMAIL PROTECTED] connecting to '192.168.1.4', attem

Re: Homemade Cluster, anyone?

> For what purposes are you clustering? There are 2 basic types of > clusters - high availability clusters, and compute clusters. Assuming > you want HA clusters, visit http://www.linux-ha.org Also, within the compute clusters, you have essentially 3 different types - massively parallel clusters

RE: Rpm broken?

On Fri, 2003-08-08 at 12:00, [EMAIL PROTECTED] wrote: > > With just one underscore in front of "db*" it won't work. > > My bad. That took care of it. Thanks! > > > Apart from that it's "rm", not "Rm". > > Unfortunately, I'm forced into using outlook at work and it feels the > need to capitalize

Re: rhn applet error

On Sun, 2003-08-10 at 12:53, Randy Perkins wrote: > On Sun, 2003-08-10 at 07:07, Robert C. Paulsen Jr. wrote: > > Well, immediately after I sent the following, the little rhn icon > > changed from a grey "?" to a blue checkmark and this problem went away. > > > > i just had the same thing happen

suspect lastlog?

Could one of you guys be so kind to tell me if I should be worried about this? I'm not familiar with lastlog, but it seems weird that when I do ]# lastlog -t 20 Username Port From Latest root tty1 Thu Jul 31 18:31:40 -0300 2003 user000

problem sync'ing 2 fs through network

hi i have a machine w/ rh9xfs12 OOTB, 5 disks making a volume group, and a logical volume defined on the whole space. it will be a SMB and NFS file server. i have a second machine, same h/w, same s/w, on which i want to mirror this lv throught the network. i tried several systems but choosed DRBD

OT: Apache blocking

How can I block direct access to images displayed on a web page? In other words, I won't want someone be able to hit the image by typing in its URL, but I do want it displayed when they load the page containing said image. -- W | I haven't lost my mind; it's backed up on tape somewhere. +-

Re: how to generate a random number using a POSIX shell??

On Sat, 2003-08-09 at 10:41, Robert P. J. Day wrote: > > as part of a shell script, i'd like to generate a random > number (preferably an integer), but i'd like to do it in a > POSIX-compliant way. > > AFAICT, using the $RANDOM variable is not POSIX-compliant -- > that variable is not defined

Re: kernel panic: No init found...

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Mon, 11 Aug 2003 15:22:31 +0800, Peter Davies wrote: > Operating system Redhat 7.3 (2.4.18-3) Unusual to find a 7.3 installation with no kernel update applied: http://www.redhat.com/errata/ > The other day I installed a second hard drive (Maxtor

Re: RC script question

On Fri, 2003-08-08 at 18:41, Jason Williams wrote: > Hello everyone. > > I was playing around with our mail server today when I came across a few > ideas that I would like to implement on my mail server. > > My mail server is currently running postfix. > The server boots to run level 3 > What I

Re: Fluxbox window manager

On Thursday, August 14, 2003, at 01:26 AM, Michael Schwendt wrote: http://www.fedora.us has a working Fluxbox package. And yes, it also provides session type info for gdm. Thanks for telling me this. It will probably help me a lot...that is, when I get my RH9 box running again. It keeps hanging

Re: Forwarding speed snapshot / bandwidth load - any tools?

On 08 Aug 2003 21:47:13 -0300 Herculano de Lima Einloft Neto <[EMAIL PROTECTED]> wrote: > >Hey all, > >Is there a tool which can give me a snapshot of downloading speed on > machines who are being forwarded packages by my machine? Maybe some way > to use netstat -c .. (I'm trying to use

Re: Could not start kdeinit?

Well, I found the cause. Actually, a friend came over and looked at it and he found the cause. I had upgraded this system from RH 7.4 to RH 9.0. Apparently when you do that some old shared libraries were left that conflicted. I would have never in a million years found that. Anyway, he found it b

GTK - Which version is RH9 Running?

Hi all, How can I find out which version of GTK I'm running please? I'm using RH9 and am trying to install gimp-1.3.17 and it's telling me it can't find GLIB 2 or higher...? Many thanks.. -- Nick W -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mail

Re: RH 9 installation via ftp problem

Sean, Thank You very muck !!! I followed what you did, "i changed the home directory of the user to /". Now I can continue my istallation. Does the solution will cause any security problem? Thanks Anton > Anton, > > If you can give some more detailed information > of what you are > s

Re: GTK - Which version is RH9 Running?

* and then Jim Hayward declared > OK let me try this again, now that my brain is awake. Never answer > questions right after you crawl out of bed .:-P Heh! - I do that all the time ;-) > RH 9 comes with both GTK/GLIB 1.x and 2.2.1. > > The development versions of the Gimp require GTK/GLIB 2

Re: Linux Forums

On Thu, 2003-08-14 at 21:58, Simran Hansrai wrote: > Hi Guys, > > I am new to linux and was wondering if there are any linux based free forums > that I can use? I am looking for something for work that we can post known > issues on and shift handovers.. any suggestions would be grately > apprecia

Linux Forums

Hi Guys, I am new to linux and was wondering if there are any linux based free forums that I can use? I am looking for something for work that we can post known issues on and shift handovers.. any suggestions would be grately appreciated.. Thanks in advance :) -Sim -- redhat-list mailing list

Re: Monitor profile request

On Sat, Aug 09, 2003 at 06:44:37AM -0400, Charles McColm wrote: > Hi all. I recently purchased a monitor that isn't in the display profiles > for Red Hat 9 and was wondering if it could be added for the next release > of Red Hat? The monitor is a Sun Microsystems CM751U 19" monitor. http://b

Trying to change SCSI cards

I'm running RedHat 9.0 (upraded from 8.0) and I have an Advansys ABP940U I'm trying to change for an Adaptec 2940U, due to some problems I'm having with my CDRW. First, let me state that the system boots off IDE, so I don't need an INITRD. Second, the system found the new card and added it to /

Re: Kernel source tree & symbolic link

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Sat, 9 Aug 2003 18:17:45 -0700, Daniel Donoghue wrote: > I recently upgraded my kernel to Redhat 8.0 Kernel 2.4.20-19.8_SMP i686. > In order to compile another app properly, I now have to "install a > kernel source tree and symlink it to /usr/src/l

Re: ppp over direct serial link

On Sun, 10 Aug 2003 12:27:47 -0700 "R. McFarlane" <[EMAIL PROTECTED]> wrote: > At 02:49 AM 8/10/2003, Sean Estabrooks wrote : > > >Hmmm.. the laptop should have an IP address _and_ netmask that match the > >ethernet subnet you're trying to join via proxy ARP. This is the most > >common cause of

Re: usb port busy, any way to recover?

gregory mott wrote: hello redhatters, seems both my usb modem, and my usb printer, are incapable of any error recovery? i dunno whether to point the finger at my box's usb hardware, the kernel (2.4.20-18.9), or drivers? Just to throw a spanner into the works - it could be an outdated BIOS as w

Re: Trying to change SCSI cards

On Sunday 10 August 2003 10:08 am, T. Ribbrock wrote: > > On my RH7.3 system as well as on my MDK9.1 system, all that was needed > was adding "alias scsi_hostadapter aic7xxx" to /etc/modules.conf. I > DO, however, have an initrd, as both systems are SCSI only. Have you > tried making one just to tr

how to generate a random number using a POSIX shell??

as part of a shell script, i'd like to generate a random number (preferably an integer), but i'd like to do it in a POSIX-compliant way. AFAICT, using the $RANDOM variable is not POSIX-compliant -- that variable is not defined in a strict POSIX shell. any other suggestions? perhaps readin

Power Management

I would like to get the power management features working on my Dell Inspiron 5000e. The only things that seem to work right now are, the LCD turns off after a specified time (defined in Xscreensaver), and I can Suspend-to-RAM. I would like to be able to Suspend-to-Disk (I have created a parti

Re: Problem with network printing on RH 8.0

Jason Dixon wrote: On Sat, 2003-08-09 at 14:57, Phil Campaigne wrote: Jason Dixon wrote: As root, run "/sbin/service iptables stop". Try your printer again. Hi Jason, That was it! Thank you , thankyou thankyou! Does the iptables duplicate the function of the NAT in my hardware router? If so

Re: How to send reply mails to posted messages

On Monday 11 August 2003 02:15, anil garrepally wrote: > https://www.redhat.com/mailman/listinfo/redhat-list You can subscribe to the list at: https://www.redhat.com/mailman/listinfo/redhat-list Regards, Mike Klinke -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www

Re: NEWBIE

which one do I need of the following shrike-docs-APAC.iso shrike-docs-EMEA.iso shrike-docs-US.iso i'm thinking this one - Original Message - From: "John P Verel" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, August 11, 2003 3:21 PM Subject: Re: NEWBIE > > On 08/11/03 15:05

stop kazaa from squid

Hi, I found that my lan users are using kazaa and consuming lots of bandwidth. I know that we can block kazaa via iptables or 3rd party tools but Is it possible to stop kazaa from squid also? With Regards Nabin Limbu -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://w

Re: Postfix /etc/postfix/access not working

On Sun, 2003-08-10 at 15:52, Lorenzo Prince wrote: > Hi. I am running Postfix on RH9. I am trying to use > /etc/postfix/access to reject email addresses adn domains that send me > spam. I followed the documentation on how to do this, and I run > postmap /etc/postfix/access > to rebuild the da

RE: nfs newbie

I think / you can not export and can not mount.. Regards, santosh -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Tan Sent: Tuesday, August 12, 2003 10:04 AM To: Redhat 2 Subject: nfs newbie hi all, trying out nfs. trying to mount to root

NFS problem: Hangs on re-boot

OK, I've another little problem. I setup NFS but if I re-boot, when it gets to the part where its trying to unmount the files system, it hangs and tells me the device is busy. The NFS wasn't mounted. Maybe that's the problem. Here part of my fstab if this helps: p120.dnsalias.net:/home /mnt/p1

Re: fax detection even after human answers?

On Mon, 2003-08-11 at 02:22, Edward Dekkers wrote: > I have plenty of customers using this set-up under Windows. If the > person does not answer the call after X rings, the software takes over but.. what happens when the human answers first? does anything exist that can still tell it's a fax wit

Re: NEWBIE

On Mon, 2003-08-11 at 15:05, Jean-Paul Natola wrote: > Hi all > > I'm brand new to the red hat world though i've had UNIX 10.2 hp-ux > experience (years ago) > > I just downloaded and created my disks and just installed the os , I > would like to know where I can get more info specific to r

Re: Can't play video DVD

Edward Dekkers wrote: >>In fact with Ogle I get nothing, but with Xine I get the fist images and it crashes. >> With mplayer it doesn't crash, but images are a mosaic of small squares and if >>visible it 's really ugly. mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-li

  1   2   3   4   5   6   7   8   >