Re: moving the /var partition [SOLVED]

Peter B. West wrote: Bill, This is getting a bit confused. You say you have just installed a new disk, yet you also say you want to reduce a 60Gb /var partition. If you are installing a new disk, you can decide at the outset how big a /var partition you want. I would go back to the beginning

Re: moving the /var partition

Chris Purcell wrote: Bill Tangren said: Hello all, I know this has been addressed on this list before, but I can't seem to find it in the archives. If someone can point it out, I would be very appreciative. My /var partition is nearly full. I installed a new hard disk, used fdisk to partiti

Re: moving the /var partition

Chris Purcell wrote: I would boot into rescue (or single user) mode and use find/cpio to copy /var/ to /user/. find /var -xdev | cpio -pmduv /user I'll use this, thanks. ...and then just rename them and modify your fstab file. This is the part I don't understand. Is this done simply by changing t

moving the /var partition

)? I couldn't figure this out, so I noticed that the largest file in /var is /var/log/lastlog, so I tried making a hard link to /user/log/lastlog. No joy. Any ideas? TIA, Bill Tangren -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list

Re: rsync-backup

MKlinke wrote: Did you put id_dsa or id_dsa.pub into the authorized_keys2 file above. It should be the public key that is inserted. Regards, Mike Klinke That was it. I used id_dsa, not id_dsa.pub, the public key. Thanks, Bill -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTE

Re: rsync-backup

Bret Hughes wrote: On Fri, 2003-10-10 at 14:16, Bill Tangren wrote: Chris Purcell wrote: I tried this on both the backup machine, and the machine to be backed up. I still get prompted for a password. Could you (or someone else) provide an example of how you would use this in a script that uses

Re: rsync-backup

MKlinke wrote: On Friday 10 October 2003 13:35, Bill Tangren wrote: MKlinke wrote: On Thursday 09 October 2003 10:41, Aly Dharshi wrote: Hello, So how do you sort out the passwd when ssh asks for one, do you have it in some secret file ? 'ssh-agent' is one option for this..

Re: rsync-backup

Chris Purcell wrote: I tried this on both the backup machine, and the machine to be backed up. I still get prompted for a password. Could you (or someone else) provide an example of how you would use this in a script that uses rsync and ssh to backup files from one machine to another? I read the ma

Re: RPM Installed SpamAssassin

Craig Daters wrote: How does SpamAssassin work? What does one have to do to use RH's installed copy? Most of the SpamAssassin stuff I find on the list is in something other than english, and I am wondering if anyone has info that could save me an hour of sifting through archives? I am looking to an

Re: rsync-backup

MKlinke wrote: On Thursday 09 October 2003 10:41, Aly Dharshi wrote: Hello, So how do you sort out the passwd when ssh asks for one, do you have it in some secret file ? 'ssh-agent' is one option for this.. %eval `ssh-agent` %ssh-add This will store and apply the key when required. Re

Re: Virus protection

rbragg wrote: Hi, I'm looking around for open source virus protection software, I saw MailScanner-4.23-11 but it seams that it needs additional 3rd party software to "eliminate" the viruses. Anybody know of others? Thanks rick There is quite a bit about this in the archives:

Re: rsync-backup

shyam wrote: hi guys i am just trying to use rsync for backup , can anybody tell me how i can do incremental backup ie only the new or modified files should go for backup any help is precious This is a script that I use to do hourly backups of the /home directory on one of my servers: #! /bin

Re: httpd and glibc compatibility problems

damovand wrote: Hi, I think mod_auth_mysql is probably for authenticating a remote user of MySQL. If I'm correct then I can comment out that statement. But my concern is the incompatibility that exists. Why is it so? Am I going to have problems with other modules and features? For exampl

ssh_exchange_identificatio error when using ssh

Hello all, I have a brand new system that I have installed RH 9 with all updates. Since the updates, I now cannot ssh *from* this server to any other one, but I *can* ssh *to* this server. This is what I get when I try from the new server: [EMAIL PROTECTED] root]# ssh -v aa OpenSSH_3.5p1, SSH

Re: separating mailing lists in mozilla mail

administrator wrote: Hello I am a subscriber in multiple Mailing lists , i am using Mozilla mail on redhat 9 , i would like to separate the mailing lists , so hat every mailing lists mails gets delieverd to a certain folder so they dont mix up with normal ones , is there an option in Mozilla Mai

sendmail errors in logwatch

Hey all, I have these errors showing up in my logwatch report (regarding postfix): SYSERR(root): opendaemonsocket: daemon MTA: cannot bind: Address already in use: 22 Time(s) daemon MTA: problem creating SMTP socket: 22 Time(s) DSN: Return receipt: 2 Time(s) SYSERR(root): opendaemons

Re: sendmail errors in logwatch

Gerry Doris wrote: It looks like you're trying to run more than one sendmail daemon. I've seen similar errors when people run sendmail as a standalone daemon and also try and call sendmail indirectly from an application like MailScanner. I suggest you check all your mail related programs and ve

Re: Minimizing windows

fred pasteck wrote: Hi all, In my quest to figure out this new RH9, I have one other question I hoped someone could help with. I noticed that alt-tab can be used to change between windows, but where do minimized windows go? Once their minimized, how can I select them without having to alt-tab thro

Re: Insallating gq

Robert Fitzpatrick wrote: I am trying to install gq as shown below and getting the dependency failures. Doesn't these files come with OpenSSL, I have the openssl-0.9.7a-5 packages installed. [EMAIL PROTECTED] ldap]# rpm -ivh gq-0.4.0-5.i386.rpm error: Failed dependencies: libcrypto.so.2 is

Re: web based newsgroup server

Doug Lerner wrote: Indeed it does! You should check out version 5 - lots of new, neat features! I have it running on Redhat 9.0 at http://inJapan.net. doug p.s. Yes, I do work for Web Crossing. But I started as an enthusiastic customer! :) p.p.s. There is a free version too now - an Apache/Sendmai

Re: Up2date

Richard Humphrey wrote: If run up2date on sendmail on a production server, what are the chances things will be meessed up? Anyone have any experience with up2date. I have hesitated to run this, but i really need to update it. Richard Humphrey System Administrator Multicam L.P. (972)929-4070 [E

Re: RH 8.0 Issues #1: Systems on Red Hat Network.

dlangschied wrote: Jason, I have looked. I don't see it there. Maybe we are miscommunicating. When I click on System, I see four Systems (not 1). When I click on System Entitlements, I only have two choices None and Demo. I don't mean to be a pain. Sincerely, David Langschied Langschied Consu

Re: web based newsgroup server

Jason Dixon wrote: On Thu, 2003-07-31 at 15:36, Bill Tangren wrote: Does anyone know of a web-based newsgroup server, that has a similar functionality to, say, squirrelmail for web-based email? A google of "web-based newsgroup server" came back with this for the 4th hit: http://www.c

Re: Sendmail not able to send to external addresses.

[EMAIL PROTECTED] wrote: Firewall? The firewall has been set to allow pop3 and smtp traffic for that ip address. -- Jody Cleveland ([EMAIL PROTECTED]) you need allow port 25 (smtp) traffic through the firewall for email to flow. HTH, Bill -- redhat-list mailing list unsubscribe mailto:[EMA

web based newsgroup server

Does anyone know of a web-based newsgroup server, that has a similar functionality to, say, squirrelmail for web-based email? TIA, Bill Tangren -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list

Re: Logwatch detail levels

Mike Vanecek wrote: On Wed, 30 Jul 2003 13:13:02 -0400, Bill Tangren wrote Richard Humphrey wrote: Check the logwatch.conf file. It explains in there how to change the detail of logging -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Barry Johnson Sent

Re: Applied RHSA-2003:222 - now cat command corrupted

Michael Schwendt wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wed, 30 Jul 2003 16:44:10 -0400, Bill Tangren wrote: rpm -Va This is kind of distressing. I tried this on two of my boxen, and *many* packages have check-sum errors. Are you sure you interpreted rpm's output corr

Re: Applied RHSA-2003:222 - now cat command corrupted

Michael Schwendt wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wed, 30 Jul 2003 12:43:30 -0700, Melissa Meyer wrote: Thanks - that fixed it. Does anyone know how the fingerprint could have changed? If not related to the SSH update, then what could be the cause? File-system corruptio

Re: Logwatch detail levels

Richard Humphrey wrote: Check the logwatch.conf file. It explains in there how to change the detail of logging -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Barry Johnson Sent: Wednesday, July 30, 2003 9:24 AM To: [EMAIL PROTECTED] Subject: Logwatch detail l

Re: spamassassin and ~/.forward

Peter Peltonen wrote: On Wed, 2003-07-30 at 01:56, Bill Tangren wrote: I recommend turning on verbose logging temporarily, to see what is happening. Add this to the top of your .procmailrc file: LOGFILE=$PMDIR/log LOGABSTRACT=all VERBOSE=yes where PMDIR is where you want to put the procmail log

Re: spamassassin and ~/.forward

Nick White wrote: So I thought it worked... But I spoke too soon. It ONLY sends mail through spamassassin if I send mail locally. As soon as I try to send mail to [EMAIL PROTECTED], spamassassin no longer checks it, and it just gets forwarded back out. You can see my .procmailrc file below, and

Re: spamassassin and ~/.forward

Nick White wrote: Ok, I see what you're saying. My current .procmailrc file looks like this: :0fw | /usr/bin/spamc So what would I need to do to make this not deliver locally, and forward it to [EMAIL PROTECTED] This recipe will do it. I pulled it out of 'man procmailex' :0 c ! [EMAIL PROTECTED]

Re: redhat-list digest, Vol 1 #8171 - 22 msgs

Mark Greene wrote: My latest up2date failed because /boot is not large enough. Taking a look at what's in /boot, and I see I have what looks like every kernel I've built: vmlinux-2.4.18-10 vmlinux-2.4.18-17.7.x vmlinux-2.4.18-18.7.x vmlinux-2.4.18-19.7.x vmlinux-2.4.18-24.7.x vmlinux-2.4.18-27.7.x

Re: logrotate and custom Apache install

Reuben D. Budiardja wrote: Hello, I have Apache installed/compiled from source in my server (*not* from RPM). In its httpd.conf, I specify so that it writes its log in /var/log/apache/logs/. The log files are access_log and error_log. So I read the man page for logrotate, and thought to play aro

Re: tape device

Kelly Goedert wrote: Hello, is there any command or file that will tell me which is my tape device exactly? Thank you. Kelly. The easiest thing is to scroll through dmesg and see what happened when the tape drive was detected by the system at boot up time. That will give you an idea. Bill

Re: mailscanner install question

Ed Wilts wrote: On Tue, Jul 15, 2003 at 04:10:13PM -0400, Bill Tangren wrote: Ed Wilts wrote: Thanks! I don't think that simply making the directories would have ever occurred to me. I am having two other problems now. One, I get lots of errors that look like this: Attempting to buil

Re: Change hostname [Re:RHLv1#8131]

Joe(theWordy)Philbrook wrote: *==}- Bill: Please pardon another dumb question, but Where do you "run" "# service network restart"? Does the "#" signify execute the "service" command at the root prompt? I tried "$ man service" yeild: "No manual entry for service" Of course, since I'm running a

Re: Change hostname

Jacques Lederer wrote: On RH 7.3, it's in /etc/sysconfig/network that you have to change the hostname. And then you still have to logout and log back in before it is visible... Hope this helps... Jack Don't need to log out. Simply run # service network restart Bill -- redhat-list mailing lis

Re: mailscanner install question

Ed Wilts wrote: On Tue, Jul 15, 2003 at 02:34:13PM -0400, Bill Tangren wrote: I am attempting to install MailScanner 4.22-4 RedHat RPM package on a RH 9 system, but it is not installing without errors. The README file says to execute ./install.sh, however it says that I don't have direct

mailscanner install question

I am attempting to install MailScanner 4.22-4 RedHat RPM package on a RH 9 system, but it is not installing without errors. The README file says to execute ./install.sh, however it says that I don't have directories /usr/source/redhat /usr/source/RPM and /usr/source/package. I don't. What are

Re: question on upgrating glibc-2.3.2-4.80.6.i686.rpm

snort bsd wrote: hi all: tring to upgrate glibc and failed: warning: glibc-2.3.2-4.80.6.i686.rpm: V3 DSA signature: NOKEY, key ID db42a60e error: Failed dependencies: glibc-common = 2.3.2-4.80.6 is needed by glibc-2.3.2-4.80.6 glibc = 2.2.93 is needed by (installed) glibc-devel-2.

Re: wierd web server problem (REPOST) (SOLVED)

Leonard den Ottolander wrote: Hi Bill, [Fri Jul 11 13:40:03 2003] [error] [client 10.1.5.58] File does not exist: /etc/httpd/htdocs The problem is, /etc/httpd/htdocs doesn't exist. htdocs doesn't appear in any file I can find, including /etc/httpd/conf/httpd.conf Are you sure you are runnin

Re: configure RH9 httpd RPM to use php?

Hardy Merrill wrote: Rick Warner [EMAIL PROTECTED] wrote: On Mon, 2003-07-14 at 11:16, Bill Tangren wrote: Is it possible to configure the httpd rpm in RH 9 to use php, or do I need to install apache from source and configure it that way? I have php and apache installed (from RPM's), bu

configure RH9 httpd RPM to use php?

Is it possible to configure the httpd rpm in RH 9 to use php, or do I need to install apache from source and configure it that way? I have php and apache installed (from RPM's), but the necessary modules don't seem to have been included in httpd.conf. Is this possible? TIA, Bi

wierd web server problem (REPOST)

problem is, /etc/httpd/htdocs doesn't exist. htdocs doesn't appear in any file I can find, including /etc/httpd/conf/httpd.conf These are some key lines in the httpd.conf file (they are the same on both servers): ServerRoot "/etc/httpd" DocumentRoot "/home/httpd"

Re: Help, please- Evolution Questions

on't have the file listed above. I am having this problem too. However, my %gconf.xml file is empty (zero length). There are no sections in it to edit. I *could* set up evolution to use POP, but that seems so unnecessary when the spool is right there. Any thoughts? Sigh, Bill Tangren -- redha

Re: PHP Scripting - Hope you get all this

Logan Linux wrote: Really sorry to bug again, Im sure you all remember the first week... Just to clarify, Im over the php scripting problem but I still need to preface all scripts with a sh to run them. Ive seen your "prompts" for want of a better word, with a $ Mine have a # (this is bash ...no

Re: which IDE controller I have

Edward Dekkers wrote: Does this mean that I have an Ultra/33 controller, and cannot use this particular Maxtor hard disk? Most hard disks (in fact all I've used), will happilly work on UDMA mode 2. This should not be a problem. Regards, Ed. Great! Thanks for replying. Bill -- redhat-lis

Re: lost password on rh 6.1 system

Alex Sharaz wrote: hi all, quick question, I've got a rh 6.1 system here and the owners have lost the root password for it. quick pointers as to how to log onto the box? bot off a cdrom and then edit the /etc/passwd / shadow files? Any help appreciated Alex At the LILO prompt, type linux singl

which IDE controller I have

yes no UDMA enabled: yes no yes no UDMA enabled: 2X 2 X UDMA DMA PIO Does this mean that I have an Ultra/33 controller, and cannot use this particular Maxtor hard disk? TIA, Bill Tangren

Re: [OT] Apache question on mod_rewrite

Rodolfo J. Paiz wrote: Do forgive me for going completely off-topic, but I have spent a solid three days of RTFM and I'm going nuts with this. At the very least, the site in question is running on a variant of Red Hat 7.3... I have a website which must be served _only_ over HTTPS. However, I se

Re: Help with possible hacking of a VirtualHost

, protocol TCP (i/f untrust) occurred 1 times I ran chkrootkit, and found nothing. Could this possibly be because someone is spoofing me? I have changed my IP number, and the entry in DNS. We'll see if that helps. Bill Tangren -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]

Re: Help with possible hacking of a VirtualHost

Joe Polk wrote: You might want to get a copy of chkrootkit and run against the machine. If you have been rooted, it might detect something. If it comes up clean, it's no guarantee, but you can breathe a little easier. Do some of the other things like check for open ports. You may want to get a b

Re: Help with possible hacking of a VirtualHost

Rick Warner wrote: I would ask for the nature of the evidence of the port scan. Also, what is the nature of the content of the web server @ site1.com? I have no evidence ... yet. Just someone's word that a port scan originated from my server. The web server is simple. Two virtual hosts, and we

Re: Help with possible hacking of a VirtualHost

MKlinke wrote: On Tuesday 01 July 2003 15:45, Bill Tangren wrote: I have a perplexing problem. I received an email this morning from some one who states that he was surfing my web site site1.com, when he received a portscan attack from site2.com. However, site2.com is a VirtualHost that is

Re: Sendmail Data Format Error

Leo Huang wrote: Wow! I think you won't believe it, I made exactly the same .procmailrc on another account, say ~mytestaccount2/.procmailrc, and it works! Any idea what's happening? How can I log the Sendmail actions? Leo What sendmail does is logged in /var/log/maillog. What procmail does is

Re: mkbootdisk failed - help!

Luciano Rabelo wrote: Hi, I'm trying to create a stand-alone boot floppy with mkbootdisk. Can any one help me? # mkbootdisk -v --device /tmp/mkbootdisk/test 2.4.18-14smp Formatting /tmp/mkbootdisk/test... done. Copying /boot/vmlinuz-2.4.18-14smp... done. Creating initrd image... gzip: stdout: No s

Help with possible hacking of a VirtualHost

vious evidence in the logs, but I'm not sure I would. TIA, Bill Tangren -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list

aperiodic scsi tape problems: suggestions?

: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: Seagate Model: STT2ARev: 8.43 Type: Sequential-AccessANSI SCSI revision: 02 This is taken from the /proc/scsi/scsi file. Any suggestions on how I can debug the problem? Bill Tangren -- redhat-list mailing list

Re: ftp welcome

Alan Giltinan wrote: hi all, how do i change the welcome note others get when they do anonomous ftp to my machine? I am running RH8. at the moment it says 'ready dude' cheers Yours sincerely, Alan Giltinan, Look for the line beginning with ftpd_banner= in your /etc/vsftpd/vsftpd.conf file. Modif

Re: *extremely slow* text processing on Redhat 9

Reuben D. Budiardja wrote: export LC_ALL=C export LANG=c Where can I place both of these so that all users who log in will have them set by default? Maybe something like /etc/profile or /etc/bashrc (if you're using bash). RDB Thanks! Bill -- redhat-list mailing list unsubscribe mailto:[E

Re: *extremely slow* text processing on Redhat 9

Ian Mortimer wrote: Am I the only one who noticed this ? No. See: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=69900 and related bugzilla entries. Since awk, sed, grep all run extremely slow on both of my Redhat 9 boxes, I can't think of any reason other than the text processing librar

Re: Deleting .exe's from mail attachment

Distribution Lists wrote: I have a redhat 7.2 with the following configured Running amavis-0.3.12 postfix-2.0.12 spamassassin-2.55 does anyone know how I would delete .exe attachments Thanks Look at procmail http://www.procmail.org. There are links to FAQ's that should address this issue. If t

Re: Win98 desktop look and feel, where to get the theme?

Michael Kalus wrote: I only know in SuSE but there is a theme in KDE called "Redmond" which is to my knowledge the closest you get to the "Windows Eperience" (No BSDs included though) ;) M. As some of you know I am migrating my workstations from Windows98 to RH9. Is there a theme for either KDE

Re: NTP trouble

Shaw, Marco wrote: [root@]# uname -a Linux 2.4.18-18.7.xbigmem #1 SMP Wed Nov 13 18:24:15 EST 2002 i686 unknown [root@]# rpm -q ntp ntp-4.1.1-1 I have a system where these commands work: ntptrace stratum_IP ntpq -p statum_IP but, when I startup the NTP service I see *no traffic* during a tcpdump,

Re: Having Problems Mounting CDROM

Vorpahl, Jason Stephen wrote: Thanks for replying. I typed mount /mnt/cdrom The directory does exist. - Jason -Original Message- From: Bill Tangren [mailto:[EMAIL PROTECTED] Sent: Tuesday, June 17, 2003 9:24 AM To: [EMAIL PROTECTED] Subject: Re: Having Problems Mounting CDROM Vorpahl

Re: Call to undefined function: mysql_connect() (it's baaaack...)

Daniel R. Hansen wrote: [EMAIL PROTECTED] rpms]# rpm -qa|grep mysql error: rpmdbNextIterator: skipping h# 641 Header V3 DSA signature: BAD, key ID db42a60e [EMAIL PROTECTED] rpms]# rpm -qa|grep php php-imap-4.2.2-8.0.5 asp2php-gtk-0.76.2-3 error: rpmdbNextIterator: skipping h# 641 Header V3

Re: Procmail

A. S. Budden wrote: Hi there, I have an ISP that provides an "[EMAIL PROTECTED]" type email address, where anything sent to that domain name is delivered to one mailbox, accessible by pop3. I use fetchmail to download the email and procmail to sort out to whom it was sent. My procmail recipes for

Re: Having Problems Mounting CDROM

Vorpahl, Jason Stephen wrote: --> I am a Linux newbie and just installed Red Hat 9. I am creating a samba server using just the command line interface, no X installed. Installation went fine, until I tried to set up my samba server. I can’t mount the cdrom. Here are the errors I get:

Re: rpm's stop working after xine

Dave Altonaga wrote: --- Edward Dekkers <[EMAIL PROTECTED]> wrote: Dave Altonaga wrote: Greets, I noticed this when I've tried to install xine. Most of the rpms would install ( at least I think they did) but after trying to install xine ui it stated that I needed other libs inorder to install

Re: procmail rule works in 7.3 but doesn't in 8.0

Ed Cooley wrote: This procmail rule works fine for Redhat 7.3, but doesn’t seem to work for redhat 8.0. Any ideas on what I can do, the message is getting processed properly by spamassassin but never gets redirected to the SPAM folder? :0fw | spamassassin :0e { EXITCODE=$?

Re: Apache 2.0.40 --> 2.0.45 upgrade via RHN

Christian Campbell wrote: My mistake. A quick read of the advisory had me thinking it upgraded 2.0.40 to 2.0.45. Regardless, does anyone know if the RHN update to Apache 2.0.40 breaks anything? Anyone had good luck with the update? Christian Christian Campbell Systems Engineer Information Techn

Re: Call to undefined function: mysql_connect() (it's baaaack...)

Daniel R. Hansen wrote: [EMAIL PROTECTED] root]# rpm -ivh php-mysql-4.2.2-8.0.7.i386.rpm warning: php-mysql-4.2.2-8.0.7.i386.rpm: V3 DSA signature: NOKEY, key ID db42a60e error: Failed dependencies: php = 4.2.2-8.0.7 is needed by php-mysql-4.2.2-8.0.7 libmysqlclient.so.10 is needed

Re: SSH after install RH9?

Chuck Dutrow wrote: Does anyone know the command line to install/enable ssh from command line? TIA Chuck Do you Yahoo!? SBC Yahoo! DSL - Now on

Re: LILO - Getting other kernels at boot time?

Syl wrote: I have a dual Win2k/RH9 system with Lilo installed on the boot sector of /dev/hdb1. At start up I get two Win2k and one Linux boot options. After I select Linux RH9 boots without displaying Lilo. I want to access different kernel images however even if I hold the or all I get is a RH s

Re: RHN kernel notification

Syl wrote: Every time I start RHN up2date I get the notification "your system is currently running kernel-2.4.20-8 but the newest installed kernel is kernel-2.4.20-18.9. It is recommended that you reboot at the first opportunity to test this new kernel." uname -a gives 2.4.20-8 i686 athlon i386 GNU

Re: libcrypto.so.2 dependency problem

Anton Piatek wrote: # rpm -i pwlib-1.4.7-3.i386.rpm error: Failed dependencies: libcrypto.so.2 is needed by pwlib-1.4.7-3 libssl.so.2 is needed by pwlib-1.4.7-3 # rpm -q openssl openssl-0.9.7a-2 # ls /lib/*libcrypto* libcrypto.so.0.9.7a libcrypt

Re: RH9 + KDE = flickering icons?

Todd A. Jacobs wrote: I am experiencing some flickering icons (e.g. the trash can, home directory, and other icons) along the left-hand side of my screen--almost like they're being constantly refreshed. Has anyone else experience this, and (if you fixed it) how did you solve the problem? Try lo

Re: Sendmail and Relay hosts

it, remove them, save the file, and run a 'make' in that directory. Then, restart your mail server: service sendmail restart That should do it. HTH Bill Tangren -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED] https://www.redhat.com/mailman/listinfo/redhat-list

Re: SAMBA log error? - SOLVED

Bill Tangren wrote: I get this repeatedly in the logs for samba: smbd/oplock_linux.c:linux_init_kernel_oplocks(287) Failed to setup RT_SIGNAL_LEASE handler : 136 Time(s) It doesn't seem to affect the functioning of samba, but I'd like to know what is causing this error and how to

Re: libthread_db.so

9.0. Am I missing a .so file? Or does a user of libthread_db.so have to provide the needed functions. Chris Gay A google search on libthread_db.so shows that it is a component of compat-glibc. This is the URL: http://at.rpmfind.net/opsys/linux/RPM/libthread_db.so.1.html HTH Bill Tangren