c-1.5.1-7.x.3
python-2.2.2-26
rpm-python-4.2-0.69
The server does not have X installed.
I checked in /etc/sysconfig/rhn and none of the files there have been altered.
Any idea why this does not work?
Thanks,
Bob
*
"Logic merely enables one to be wrong with autyhority" - Doctor Who
d -l
Sue sue, I get the same error.
'usermod invalid field Sue' or
'usermod invalid field sue'
I have to do more searching. I cannot believe that
usernames with uppercase letters are illegal.
Thanks,
Bob
Michael S. Dunsavage wrote:
On Thursday 09 October 2003 12:58 am, you
Thanks for the tip, but that just changes the password for
the lower case user 'sue' . I still cannot add a user named
'Sue' with upper case first letter.
Bob
SoloCDM wrote:
On Wed, 8 Oct 2003, Bob Hartung wrote:
Date: Wed, 08 Oct 2003 23:58:33 -0500
From: Bob Hartu
, e.g. 'sue'
and then 'usermod -l sue Sue' but I get an error saying that
'Sue' does not exist.
Helpful hints, pointers appreciated.
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
d NIC. The LAN then came up fine.
What I am wondering is when the DSL service is connected (they use DHCP to
provide my computer with the IP address) will that disable my manually
configured NIC?
Thanks again !
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.
Hal,
The 5200 supports Ethernet and USB.
My DSL provider uses PPPoA. Does the modem do all of the PPPoA
authentication with the provider or do I need to use PPoE over PPPoA to
authenticate from the Linux box?
Thank you
Bob
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
The system board of my RH router has an onboard Ethernet port. I assume by
enabling the onboard port the system would see both the existing Ethernet
card and onboard NIC, correct? Then it would just be a matter of changing
the default gateway to the system Ethernet port?
Thanks
Bob
-Original
to the LAN.
These are probably very basic questions but just hate to have the telco come
out, install the service and end up not having internet access any longer.
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Question:
Is there any freeware/shareware/open-source messaging
server software available. In our office I need to make
shared info. available for 4 to a maximum of 5 people and I
would like to host the server on RH 8.
Thanks,
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL
Sounds like SuSE will be used more in the future.
:-( Bob
Gerry Doris wrote:
On Tue, 23 Sep 2003, Rodolfo J. Paiz wrote:
At 17:37 9/22/2003, you wrote:
On the other hand (from a University on a tight budget) I don't fancy forking
out for large numbers of RHEL licenses and I'm not
Hi all,
Is there any way to get around adduser's dislike of a
capital letter in a user's name? I don't see the solution
in the man page.
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Ed,
Update the SSL certificate first:
https://rhn.redhat.com/help/ssl_cert.pxt
Then you'll be able to update everything else without a problem.
-Bob
> On Sun, Sep 21, 2003 at 04:40:46PM -0700, Richard S. Crawford wrote:
>> It's been awhile since I've used up2date
Somehow my /mnt/floppy has become associated with Cervisia -
the CVS tool on RH9. I have been through the konqueror and
Cervisia docs and I cannot figure out how to break this
association so that konqueror will open when I click on the
fd icon instead of cervisia.
Ideas???
Tnx
Bob
with my pc] and thus there was a firewall
running that I was not aware of! I never shut the pc off so
did not see the start up activity and it is set to
automatically log in so she could restart without any problem.
Another lesson learned.
Tnx
Bob
John Nichel wrote:
Bob Hartung wrote:
W
ublic
valid users = maindesk, @samba
# create mask = 0660
# force create mode = 0660
# directory mask = 0770
browseable = yes
#===end of smb.comf===
Thanks
Bob Hartung
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/r
Can somone offer some insight as to the source of this
problem and point me toward the right docs so I can get
things going again.
Thanks,
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
I have been using a Belkin Omni Cube also with resolution up
to 1600 x 1200 on both Linux and Win2K machines without any
problems.
Bob
[EMAIL PROTECTED] wrote:
I would recommend AGAINST using any Belkin KVMs. We've had nothing but
problems with them. If you have a Windoze box and a Linu
.
To rule out a path problem, I have moved the image into
the root [html] RootDirectory without any change.
Ideas? What am I missing?
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
is
causing the login issue. Almost acts like if you tried to login to a *nix
system but the account was set up with a false shell.
-Bob
> On Mon, 8 Sep 2003 11:53:00 -0500 (CDT)
> "Bob Moran" <[EMAIL PROTECTED]> wrote:
>
>> I have a RH 9.0 server with all of the l
Bret,
Thanks for the info. I'll get to work on it tonight.
Bob
Bret Hughes wrote:
On Mon, 2003-09-08 at 11:50, Bob Hartung wrote:
Hi all. A small problem - probably one of interpretation. I am using
sshd on a firewalled inetrnal network to control a server. Server name:
smbs
ld be greatly appreciated. Thanks in advance.
--
Bob Moran
System Administrator
API International, Inc.
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
authentication files in the correct directories. As far as the docs to
I believe I have.
All suggestions appreciated.
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
very appreciated! The server is
currently running stock RH7.2 with current updates.
TIA,
--
+
+
| Bob Taylor Email: [EMAIL PROTECTED]
|
|
|
| Want to g
Hi all,
Stupid me! I was trying to free up some space [idle moments on a
dreary holiday sort of screwing around] and I renamed some mozilla
files. I haven't yet deleted anything, but need to know what files to
import into a new Mozilla user profile so I can recover:
bookmarks
address li
My RH9 box can see the HP printer connected to an XP machine during network
printer configuration but when Linux tries to print the response is that it
cannot connect to the printer.
I tried setting up a guest account on the XP machine and using guest as the
user on the Linux box but that didn't h
download a kernel
up2date download :)
Bob / wa2mno
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Gene Poole
Sent: Monday, August 11, 2003 10:20 AM
To: [EMAIL PROTECTED]
Subject: Re: Printing to an XP printer
Sean,
I too print from a Red Hat Linux box to a
speeds at the time the transfer stops but
I have noticed it stopping at 5kbps. It doesn't sound like a connection
issue if the transfer speed is that good at the time the transfer stops.
Thanks
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/ma
Sean,
Could the problem be that I have named the XP machine with a
'FirstLast' name which is not resolved properly by DNS?
I tried adding the top domain name of the XP machine to Hosts but it did not
resolve the problem.
Bob
-Original Message-
From: [EMAIL PROTECTED]
[mai
This sounds like an XP issue, doesn't it?
Bob
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Sean Estabrooks
Sent: Sunday, August 10, 2003 1:10 PM
To: [EMAIL PROTECTED]
Subject: Re: Printing to an XP printer
On Sun, 10 Aug 2003 13:04:31 -0500
&qu
.
Bob
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Sean Estabrooks
Sent: Sunday, August 10, 2003 4:27 AM
To: [EMAIL PROTECTED]
Subject: Re: Printing to an XP printer
On Sun, 10 Aug 2003 00:57:01 -0500
"Bob" <[EMAIL PROTECTED]> wrote:
Hi Bob
Rus,
Thanks!
Bob
Rus Foster wrote:
Hi,
I am trying to learn a little more about the bash shell so I can figure
out some of the script files that I see all the time. Is there a way to
run bash scripts or a single line of a script in an interactive mode from
the command line and echo the
along
with some of the commands?
Hope this is not to dumb of a question to elicit a meaningful response.
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
plications.
Can someone give me an idea of how to procede. I have, from the command
line, uninstalled all KDE packages and reinstalled them all and chooses KDE
form the login in screen to no avail.
Thanks for your time.
Bob Hartung
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTEC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of MKlinke
Sent: Tuesday, July 29, 2003 10:42 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: List has died!
As of yesterday afternoon the list mail has stopped flowing here.
List admin, will we need to re
help appreciated.
TIA
Bob Hartung
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Also check the root mail file for error messages.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Együd Csaba
Sent: Thursday, July 17, 2003 8:10 AM
To: redhat-list
Subject: Crontab - won't work from crontab but from command line (???)
Hi All,
I have a probl
check the shell type sh or bash...
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Együd Csaba
Sent: Thursday, July 17, 2003 8:10 AM
To: redhat-list
Subject: Crontab - won't work from crontab but from command line (???)
Hi All,
I have a problem with a cront
/var/log/messages
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Farschad Torabi
Sent: Saturday, July 19, 2003 6:40 AM
To: [EMAIL PROTECTED]
Subject: Re: Activating ETH0
Edward,
i tried "ifup eth0" and the message is something like this:
"Determining IP in
There are a number of reasons:
1. DHCP not running/enabled.
2. Is the machine physicall connected at both ends (plugged in securely to
eth0 and into hub/switch?)
3. Did you set up or migrate networking during the update from RH8 to RH9?
4. Run ifconfig to see if you get any output for eth0.
5. if
Hostname is in the following file.
/etc/syscofig/network
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Scott Antonivich
Sent: Tuesday, July 15, 2003 2:57 PM
To: [EMAIL PROTECTED]
Subject: Change hostname
His is going to sound like a very simple question.
Have you run sndconfig?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mike Pelley
Sent: Tuesday, July 15, 2003 1:48 PM
To: redhat-list
Subject: Getting sound to work on an Abit IC7 and RH9
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
I'm tryin
Yes. Sym links are a good choice. I have two servers running such as way
now.
bobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Reuben D. Budiardja
Sent: Monday, July 14, 2003 1:55 PM
To: [EMAIL PROTECTED]
Subject: Re: is it alright to move /var/spool/mai
aumix -v 90
Turns up the volume.
BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Benjamin J. Weiss
Sent: Sunday, July 13, 2003 10:42 AM
To: [EMAIL PROTECTED]
Subject: Re: Sound Problems (C-Media)
Ack. I had this problem when I was setting up my linu
aumix -v 90 turns up the volume.
BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Benjamin J. Weiss
Sent: Sunday, July 13, 2003 10:42 AM
To: [EMAIL PROTECTED]
Subject: Re: Sound Problems (C-Media)
Ack. I had this problem when I was setting up my linux
if you have the cash, the commercial sendmail version has a web gui called
Sendmail Switch. Works fairly well.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Res
Sent: Thursday, July 10, 2003 6:36 PM
To: [EMAIL PROTECTED]
Subject: Re: qmail or sendmail
H
PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ed Wilts
Sent: Tuesday, July 08, 2003 3:29 PM
To: [EMAIL PROTECTED]
Subject: Re: Running Sendmail High Volume
On Tue, Jul 08, 2003 at 02:29:51PM -0500, Bob Buckley wrote:
> Quick question concerning Sendmail 8.12 on RH 7.2.
>
> There is a featu
There
are four (or more) possible workspaces per X session.
And
icon on the tool bar shows which you are on.
Check
that first.
BobB
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf Of John
SalamoneSent: Tuesday, July 08, 2003 2:33 PMTo:
[
Quick question concerning Sendmail 8.12 on RH 7.2.
There is a feature called Queue_Grouping that should improve through put. Do
any of you have experience tuning sendmail for high volume output?
BobB
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mail
Also, ifconfig sets network confs in memory only.
Try hard coding in /etc/sysconfig/network-scripts.
BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Miranda Gomez Miguel
Angel
Sent: Monday, July 07, 2003 7:03 PM
To: [EMAIL PROTECTED]
Subject: ip alias
According to the services file the high port 1812 is reserved for
Radius...good.
Seems that the application Radius is referencing the host file or the
localhost name/assigned IP.
Aside: never wise to transmit a user name and password to message boards.
Also, Radius probably needs the IP 172.16.3
AND
less /root/anaconda-ks.cfg
This file shows all the hardware that was set up.
BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Geoffrey Lane
Sent: Saturday, July 05, 2003 9:08 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Redhat 9 / As
For starters login as root.
Run the following commands to see if either card was detected. If they are
not there then you might have incompatibilty issues.
less /etc/sysconfig/hwconf
You should see type of data this for audio
class: AUDIO
bus: PCI
detached: 0
driver: emu10k1
desc: "Creative Lab
you can also use ntsysv and select/deselect daemons via a text based
interface.
chkconfig works very well too.
BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Robert P. J. Day
Sent: Friday, July 04, 2003 7:03 AM
To: redhat list
Subject: Re: newbie in R
>From my experience, 3com is generally a good choice in NICs for RH releases
going way back. However the gigabit cards are somewhat newer to me. Might
check the BIOS for enabling the onboard NIC.
The sound card might be ok. Run kudzu first to see if it finds it. If it
does then you're ok. If not,
you need to make your linux machine the gateway for the rest of your
computers. also unless you manually assign the IPs, you'll need to enable
dhcp.
Also, use the wizards to enable a firewall (iptables) to look OUT nearly
everything except port 110, 25, and 80. (We're supposed to get slammed this
That would put MS in a bad way, i.e., a whole new wave of lawsuits.
I'd rather spend my time continuing the momentum of something that works --
Linux -- rather than fixing something that kind of works.
If we could learn anything useful from them it would be their GUI.
Then again, it would be nic
Is IPV4_FORWARD set to yes?
BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Sent: Thursday, July 03, 2003 6:28 AM
To: [EMAIL PROTECTED]
Subject: Re: Internet Gateway
Use IpForwarding funtcion in Linux
good luck
Senthil
- Or
Can you see any network traffic at all on the linksys card?
Generally RH has not support linksys cards that well. Some of the older
D-Links and nearly any 3-COM would be a better choice.
BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Blake Thornton
Se
You can patch into your sound card using, usually, a RCA-Y to stereo 1/8
inch phone jack. Ensure that you don't over drive the sound card in put.
I.e., ensure that you pickoff the preamp.
The tools that come with RH record *.au or *.wav and some do *.mp3, I think.
CDROM burning is a function most
What
version of RH are you using? You have to load module for USB on most linux
releases earlier than 8.0. Some of the module are available. Others you have to
down load.
If you
get the me version I might be able to get you more info.
BobB
-Original Message-From: [EMAIL PROTEC
The one thing I see that on one has addressed: sftp and ssh. ftp will not
work over ssh. before you can execute anything you must set up a secure
tunnel between the servers if ssh is the only connection method besides
telent, rlogin, etc.
mayby something to go on.
BobB
-Original Message-
dmesg just says Postmaster [failed]
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
This is courtesy of my son. Try "mount /mnt/floppy"
Regards,
Bob
+++
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Toto Gamez
Sent: Sunday, March 16, 2003 7:50 PM
To: [EMAIL PROTECTED]
Subject: Can't mount floppy dr
At this poing I receive the error:
Error: "unsupported operation" creating new folder
So how am I to add a new mmenu item to the main menu?
No other documentation at Gnome.org or RH site that I can find.
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?sub
Ben,
Thanks! I was worried about installing an older version and was not
sure of the effects. It did the trick.
Bob
Ben Russo wrote:
On Sun, 2002-12-15 at 12:27, Bob Hartung wrote:
HI all,
I am running RH8 (Psyche) with all updates and errata installed on a new
workstation. I am
alled and are
running nicely.
All help appreciated!
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
Bret,
Thanks! Should have thought of looking there! Duh!
Bob
Bret Hughes wrote:
On Fri, 2002-12-13 at 16:07, Bob Hartung wrote:
Hi all,
I'm trying to ftp into the RH site and it is S-o-o-o-w that I tried
sunsite and the RH directory under distributions is empty. Is there a
Hi all,
I'm trying to ftp into the RH site and it is S-o-o-o-w that I tried
sunsite and the RH directory under distributions is empty. Is there an
up-to-date RH mirror available?
Does anyone else have an trouble with the speed of the RH site?
TIA
Bob
--
redhat-list mailing
Thanks to Michael and Robert. I'll read up on parted.
Thanks again,
Bob
Michael Schwendt wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 12 Dec 2002 16:12:01 -0600, Bob Hartung wrote:
Does anyone know is DiskDruid is available after install to modify
partitions on an
Does anyone know is DiskDruid is available after install to modify
partitions on an EMPTY harddrive - hdb that was set up as a single data
directory but now needs to be partition prior to storing any data?
TIA
Bob
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject
installation, upgrade, freshen policy. This will surely turn off new users
let alone those of us used to the "old" way.
Thanks
Bob
Ryurick M. Hristev wrote:
On Tue, 10 Dec 2002, Bob Hartung wrote:
Okay so call me stupid. And yes I have RTFM! They just don't happen to
mention
Okay so call me stupid. And yes I have RTFM! They just don't happen to
mention what gnorpm has beeen turned into in RH 8 and the re-write of the
default GUI. So please point me in the right direction!
Thanks
Bob Hartung
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROT
From: "Ian Lipsky" <[EMAIL PROTECTED]>
> On Tue, 26 Nov 2002, Bob Blakely wrote:
>
> > I know this will seem trivial to most of you, but for the life of me I
can't find the method for adding a second hard drive to my system. Perhaps
someone could point out to me
I know this will seem trivial to most of you, but
for the life of me I can't find the method for adding a second hard drive to my
system. Perhaps someone could point out to me where in which of my several
v7.3 manuals this is discussed so that I can use "hdb1"
I have been trying to download updates from the RH site for 4 days and have
not been successful. I tried the sunsite mirror tonight but the /redhat
directory is empty.
Does anyone know if RH is having problems or is the server just overloaded?
TIA
Bob
--
Bob Hartung
Bettendorf, IA
Hi all,
I have gotten over the shock of upgrading to rh8.0 with most of my
desktop functionality back, icons re-established, etc. Now when I am in
mozilla 1.0.1 and try to edit any of my e-mail filters mozilla crashes and
dies.
Has anyone on the list experienced this? Any ideas?
TIA
Bob
ERic,
Using a VX800, VP180 and VP201m on various Linux configurations {RH 7.3
and 8.0} with no problems.
Bob
Eric Sisler wrote:
Greetings,
I'm considering purchasing a ViewSonic flat panel monitor and I'm
wondering if there are any issues involved in running X-Windows (RedHat
7.3 o
Is there a way to get Evolution to pick up Hotmail.com?
Llaamaboy
_
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
--
redhat-list mailing list
unsubscribe mailto:[EMA
Loaded 8 for the first time last night and was bumping around with user
account.
This morning, I could not gain access with that user. Logged on as Root,
using both Gnome and KDE and managers, the Red Hat User Manager had changed
the password and all attempts to change it back to the wanted pa
. Thousands of
example of how to do it and the proper syntax -- but no answer to the basic
question.
TIA
Bob
--
Bob Hartung, Bettendorf, IA
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
Try www.miva.com. It is a nice an reasonably priced package and I do
believe they have a gallery of Merchant sites that you can look through to
see what you can do with the package.
Bob
- Original Message -
From: "Robert P. J. Day" <[EMAIL PROTECTED]>
To: "redhat
We
basically threw away all the D-Link cards and replaced them with 3Com. Seems to
be the industry standard and more accurate with packet sniffing,
etc.
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Arthur
ChanSent: Saturday, September 0
Hi all,
I can't seen to ftp into RH site to download updates & errata. The
sunsite mirror shows an empty RH directory. Anybody else having the same
problem. I have been able to get in before and have not made any changes in
my firewall.
TIA
Bob
--
Bob Hartung, Bette
Title: Message
try
this
mv
*.inc *.php.
You
should always backup or make a copy of the entire directory in which you are
operating.
With
great power comes awesome responsibility.
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Brian
I know of several ways, but what is the best way to block an email from my
email server which is running sendmail.
Thanks,
Bob Buckley
Director of Technology/Technical Services
Fuel Links, Inc.
v 214-277-8213
main 214-277-8080 ex t112
f 214-277-8081
c 214-912-0940
<>
You really should look into diald.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Kevin MacNeil
Sent: Wednesday, September 04, 2002 6:26 AM
To: [EMAIL PROTECTED]
Subject: Re: wvdial. - mgetty or what
On Wed, Sep 04, 2002 at 12:20:56AM -0400, Anthony E.
enclose the name in quotes cd "Start Menu"
BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jianping Zhu
Sent: Tuesday, September 03, 2002 11:19 AM
To: [EMAIL PROTECTED]
Subject: how to access a directory whose name have space?
for example: A direct
Some
of the D-link cards I've used were not compatible with the Kernel, RH7.0/1/2. If
it doesn't show in your /etc/sysconfig/hwconf file, then that could be the case.
Otherwise use a 3com card.
BobB
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf
at 09:20:10PM -0500, Bob Buckley wrote:
> We use wvdial quite a bit. Easy to configure and use. But you must be root
> to dial out. At least that is as far as I have gotten.
Sudo! It is possible to use your modem without being root, but it
requires fooling around with device permissio
SIGNED MESSAGE-
Hash: SHA1
On Sat, Aug 31, 2002 at 09:20:10PM -0500, Bob Buckley wrote:
>
> We use wvdial quite a bit. Easy to configure and use. But you must be root
> to dial out. At least that is as far as I have gotten.
You can change the permission on the device that /dev/modem
02 9:33 PM
To: [EMAIL PROTECTED]
Subject: RE: Newbie: How do I get my scroll wheel mouse to work???
Hi Bob -
No, I don't know anything about it. I just looked for it and couldn't
find it in any of the menus off of Main Menu, but I could have missed
it. How does one start Xconfigurator?
Tha
One question, after jumping in the thread after the fact. Did you try
Xconfigurator? BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Zorrox
Sent: Sunday, September 01, 2002 8:24 PM
To: [EMAIL PROTECTED]
Subject: RE: Newbie: How do I get my scroll whe
Here is a start.
http://dsb3.com/wvdial/wvfaq.html
We use wvdial quite a bit. Easy to configure and use. But you must be root
to dial out. At least that is as far as I have gotten.
I plan to use diald in the future which is the perfered dial up software.
Wvdial is quick to configure.
Both diald
Yes. It is a config wizard similar to Xconfigurator. Just follow the
prompts. BobB
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Bob Buckley
Sent: Thursday, August 29, 2002 2:21 PM
To: [EMAIL PROTECTED]
Subject: RE: sound help
Have you run sndconfig
Have you run sndconfig?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Blake Thornton
Sent: Thursday, August 29, 2002 1:55 PM
To: Redhat List
Subject: sound help
I think that /dev/dsp is the sound device for both recording and playback?
Could someone t
In my humble opinion this story sounds a lot like it might originate in the
Northwest around Redmond as part of the ongoing FUD campaign.
My $0.02
Bob
Ed Wilts wrote:
> On Mon, Aug 26, 2002 at 01:35:03PM -0700, Rick Forrister wrote:
>
>>I'll get worried
>>when I s
Matt
Thanks. I'll just leave it alone. I am not advanced enough to play
with the make file for the kernel. But now I know where the name comes from.
Bob
Matthew Galgoci wrote:
> the -custom minor version suffix is compiled into your kernel. I advise against
> manually re
Try running
'make mrproper' before make dep clean bzImage this will clean up from
any previous compile.
Bob
Knut Ove Hauge wrote:
> Do you make xconfig
> make dep
> make clean
> make bzImage
> make modules
> make install
> make modules_install
>
Dale,
That did it! Now I haven't delved into this subdirectory before. Where
will I find additional info on the purpose etc. of all the settings in this
subdirectory?
Thanks again!
Bob
Dale Kosan wrote:
> Try editing /etc/security/console.apps/xcdroast and change
> &qu
by server
Xlib: No protocol specified
Gtk-WARNING **: cannot open display: :0.0
X-windows seems to be working well otherwise.
Where should I start looking?
TIA
Bob
--
Bob Hartung, Bettendorf, IA
___
Redhat-list mailing l
1 - 100 of 534 matches
Mail list logo
