I'd set up reasonnable system partitions (depending on what you'll install)
such as
50/100 MB for /boot
2/4GB for /
swap (twice ram)
then use LVM for the rest. with LVM you'll be able to increase/decrease
partitions size seamlessly
A 13:00 24/03/2003 -0500, vous avez écrit :
All,
I'm setting
ITTY [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 25, 2003 4:13 AM
To: [EMAIL PROTECTED]
Subject: Re: 38 GB partitioning advice
I'd set up reasonnable system partitions (depending on what you'll install)
such as
50/100 MB for /boot
2/4GB for /
swap (twice ram)
then use LVM for the rest. with LVM
:[EMAIL PROTECTED]
Sent: Tuesday, March 25, 2003 4:13 AM
To: [EMAIL PROTECTED]
Subject: Re: 38 GB partitioning advice
I'd set up reasonnable system partitions (depending on what you'll install)
such as
50/100 MB for /boot
2/4GB for /
swap (twice ram)
then use LVM for the rest. with LVM
PROTECTED]
Subject: RE: 38 GB partitioning advice
I see a couple of problems already. /boot should be no more than 100MB.
Anything more is a waste. / should be way more than 500MB. I know that
some will say I run my entire Linux box on a 486DX66 and 250MB HD!
Well, this is RH8 and given what you're
.
Now I have to go read up on LVM to see if I can add it to the mix.
Thanks again!
Stuart
-Original Message-
From: Joe Polk [mailto:[EMAIL PROTECTED]
Sent: Tuesday, March 25, 2003 10:11 AM
To: [EMAIL PROTECTED]
Subject: RE: 38 GB partitioning advice
I see a couple
: Tuesday, March 25, 2003 10:43 AM
To: [EMAIL PROTECTED]
Subject: RE: 38 GB partitioning advice
I've not played with LVM myself, but it would certainly give you
flexibility. If I don't find a buyer for my HP Netserver, I may just
play with LVM myself. For a relatively static server, though, I
partitioning advice
I've not played with LVM myself, but it would certainly give you
flexibility. If I don't find a buyer for my HP Netserver, I may just
play with LVM myself. For a relatively static server, though, I think
you'l do fine with the partitioning scheme I gave. I build most of my
All,
I'm setting up a RH8 server (FTP) onto mirrored 40 GB drives (38162 usable...doing the
RAID as part of the OS install) and need some partitioning suggestions for the
installation. What partitions and sizes should I use (and why for those who feel like
being extra informative...thanks in
Partitioning can be a subjective thing since it depends, in part, on
what you intend to do with the machine. If, for instance, you intend to
have a sizable user base, then you want to have plenty of /home space.
Regardless, most people new to Linux make the mistake of not making /usr
and /var
* Joe Polk
I typically partition as follows:
/boot - can be very small, around 50-75MB. I think RH8 recommends 75mb.
/ - I like to make this fairly large, but not the largest since it
houses everything not specified elsewhere.
/home - If you intend to have lots of users or share
On Wed, 15 Dec 1999, Jason Grovert wrote:
What is the best way to partition a drive as far as sizing goes.
Let's say I have a 8 gig hard drive. How would everyone do it and for
what reasons?
As said, it depends, but I think you are looking for what other people
have done and why...
At 12:45 AM 12/17/99 +1000, Tim Fairchild wrote:
I made the mistake of making a single 256 meg swap partition rather than
two 128 meg partitions as planned - but then found that apparently the
new kernal handles larger swap files. Handy that :-)
= 2.2 apparently. I would say it's safer to make
On Wed, 15 Dec 1999, Jason Grovert wrote:
What is the best way to partition a drive as far as sizing goes. Let's say
I have a 8 gig hard drive. How would everyone do it and for what reasons?
Depends on what you are doing with it. I usually do
10 for /boot
100-150 for /
100-200 for /var
In addition, I'd split out /tmp, and of course don't forget your swap which
the old rule of thumb is 2*physical ram, but I usually use 128M+ (2.2.x) or so with
disk capacities being so outrageously huge.
On Wed, Dec 15, 1999 at 02:16:18PM -0500, Brian Anderson wrote:
On Wed, 15 Dec 1999, Jason
Forgot about swap... oops :)
I usually use either 2xRAM, or 128, depending on the system (my home
machine has 128 physical, and i don't feel that i need 256 swap)
Brian
On Wed, 15 Dec 1999, J. Scott Kasten wrote:
In addition, I'd split out /tmp, and of course don't forget your swap
On Wed, Dec 15, 1999 at 02:16:18PM -0500, Brian Anderson wrote:
On Wed, 15 Dec 1999, Jason Grovert wrote:
What is the best way to partition a drive as far as sizing goes.
Let's say
I have a 8 gig hard drive. How would everyone do it and for what
reasons?
Depends on what you are doing
On Wed, 15 Dec 1999, Alan Mead wrote:
As I see it, the main rationale for making a partition is (1) because you
must (not usually an issue with Linux), (2) to follow a standard, (3) to
localize something like growing log files, mail spools, etc. so that they
don't take up the whole disk, (4)
On Wed, 15 Dec 1999, Jason Grovert wrote:
What is the best way to partition a drive as far as sizing goes.
Let's say I have a 8 gig hard drive. How would everyone do it and for
what reasons?
Cut it up into bite-sized pieces, and serve with Ranch dressing.
Seriously, this is a FAQ with no
18 matches
Mail list logo