Re: [Repeater-Builder] Can a Master 3 narroband

. Therefore I feel narrowbanding would be possible. I will be attempting this in six months or so. 73 de Tom Manning, AF4UG - Original Message - From: Jim in Waco WB5OXQ To: Repeater-Builder@yahoogroups.com Sent: Friday, August 27, 2010 10:07 AM Subject: [Repeater-Builder

Re: [Repeater-Builder] Legacy Radios Still in Service

I've got a UHF drawer if someone wants to make a UHF repeater out of it... Joe wrote: I worked on one of these this past year. It's still in service as a backup radio for a dispatch center. Still keeps on ticking except for the $^#*&^% buttons that get dirty and cause problems. 73, Joe, k1ik

[Repeater-Builder] Re: Intermod Calculation

final PA that had been serviced just at the time the problem started. They replaced the PA. Hope this story helps. Tom

Re: [Repeater-Builder] Dissasembly of msr 2000 continuous duty amp. How?

Why has no one suggested replacing the guts of this beast with a Mitrek PA? radi...@aol.com wrote: Sucess! I completely cleaned and re tinned my Weller 8100 tip, added some solder, and got heat transfer to pop it up. I was not aware of the fish paper that the wires came thru. Now to trouble

Re: [Repeater-Builder] What version RSS for gr1225

It will unless it's one of the later radios, then you might need the 3 version...4 version is the same as 3 but for XP OS. rush8001 wrote: Im wondering of Motorola Radius 1225 series RSS version r02.00 will program the GR1225 series repeaters. Does anyone have any idea? Thanks.

Re: [Repeater-Builder] M67709SH Mitsubishi Module

in, thp kevin valentino wrote: www.rfparts.com <http://www.rfparts.com> --- On *Mon, 4/19/10, Tom Parker //* wrote: From: Tom Parker Subject: [Repeater-Builder] M67709SH Mitsubishi Module To: Repeater-Builder@yahoogroups.com Date: Monday, April 19, 2010, 3:55 PM

[Repeater-Builder] M67709SH Mitsubishi Module

Anyone know of a source, or have any M67709SH or M67709 Mitsubishi RF Modules? Thanks, Tom Parker

[Repeater-Builder] Re: Problems reaching the RB website

Hello All . This is what I have found regarding this issue. Hope this may help. Tom VE1TA Advisory provided bySafe BrowsingDiagnostic page for imgdownloads.comWhat is the current listing status for imgdownloads.com?Site is listed as suspicious - visiting this web site may harm your

Re: [Repeater-Builder] Looking for Preamp info

Found this with google, "Lunar product were made by Louis, KG6UH (back when he was WB6NMT). You might try contacting him directly for a schematic or manual. These are mostly from the 70s." You might try googling just Luna Preamp like I did. Mark wrote: Tom, I think they only w

Re: [Repeater-Builder] DB224A new harness

Hello Allan As you note it would take a good deal of work to go from 154 to 220Mhz. Yes the loops would have to be shortened and the harness would have to be be reworked-shortened. This would be easier than changing to 144Mhz. I have done this twice in the past. 73 de Tom Manning

Re: [Repeater-Builder] DB224A new harness

measurements for 220Mhz. I also have several DB224a's that have been removed due to problems. These could easily be modified to cover 220Mhz. 73 de Tom Manning, AF4UG - Original Message - From: NORM KNAPP To: Repeater-Builder@yahoogroups.com Sent: Wednesday, February 17, 20

Re: [Repeater-Builder] HAM Mototrbo Systems

Firmware already "upgrades" a NXDN radio to P25, but alas, then it is no longer NXDN. I don't think you'll ever see P25 and turbo or NXDN in the same box. Big "M" did remove the XTL1500 from the above price book and put it in the dealer's price sheet last month. my 2 cents MCH wrote: A

[Repeater-Builder] Please drop me from your mailing list. k6...@charter.net, thank you. Tom Corso

- Original Message - From: AJ To: Repeater-Builder@yahoogroups.com Sent: Friday, February 12, 2010 3:26 PM Subject: Re: [Repeater-Builder] Re:Portable MSR2000? Negative on this one - only RX/TX and the power cord coming out of the side panel on this one. Was hoping t

[Repeater-Builder] please delete my address from your email address list. k6...@charter.net. thank you Tom Corso

Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/Repeater

Re: [Repeater-Builder] Just a Crazy Thought

- Original Message - From: i recycle computers To: Repeater-Builder@yahoogroups.com Sent: Thursday, February 11, 2010 6:29 PM Subject: [Repeater-Builder] Just a Crazy Thought I have heard numerous urban legends of 27 MHz CB repeaters being built. has anyone ever co

Re: [Repeater-Builder] On the topic of RCA radios

r-Builder%40yahoogroups.com>] On Behalf Of Tom Parker Sent: Sunday, January 31, 2010 3:30 PM To: Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> Subject: Re: [Repeater-Builder] On the topic of RCA radios Looks like a TAC-200 to me. Should have two channel capability an

Re: [Repeater-Builder] On the topic of RCA radios

Looks like a TAC-200 to me. Should have two channel capability and PL encode/decode. If I remember correctly, the PL code is changed by installation of the correct precision resistor. I'm not sure of the VHF power, but the UHF version is 25 watts, often capable of 30 to 40. Hope that helps,

[Repeater-Builder]

--- Begin Message --- What, you ask, is 'Butt dust'? Read on and you'll discover the joy in it! These have to be original and genuine. No adult is this creative!! JACK (age 3) was watching his Mom breast-feeding his new baby sister... After a while he asked: 'Mom why have you got two

[Repeater-Builder] Here you go Jerry now you know why I want to get a bunch of them***

--- Begin Message --- Subject: Fw: Two Dollar Bill Your chuckle for the day. Subject: FW: Two Dollar Bill Subject: FW: Two Dollar Bill THE $2.00 BILL I TRIED TO SPEND: IF YOU'RE AS

[Repeater-Builder] Re: MSR2000 Power Supply part needed

. Next project is to make a mouse shield for the repeater box! I'll let you know how it turns out. We are hoping for K3HKI = 1, Mice = 0 73 de Tom/W4OKW Pax River George Henry wrote: > Attached is the troubleshooting chart for that PS... maybe it will be > of some help. > &

[Repeater-Builder] MSR2000 Power Supply part needed

illing to part with? Tom/W4OKW

Re: [Repeater-Builder] GE MASTR-II Stuff

***I WOULD LIKE A COPY OF THE INVENTORY WHEN YOU HAVE THE TIME . LET ME KNOW YOUR MODE OF SENDING IT AND WE'LL GO FROM THERE. THANKS, k...@charter.net TOM *** As part of an estate I'm helping with, there is a mess (I'd guess close to 300-400 l s)

Re: [Repeater-Builder] Fs, Link Communications RLC - 2, $450.00

***I have two extra HF stations that are more than worth that kind of money, do you think your friend might be interested in doing a trade...my Equipment is all Kenwood*** Tom. K6TC***

Re: [Repeater-Builder] Motorola Spectra Power Cord Reversal

***Open it up and follow the power line (Red) usually there is a small fuse in-line just to prevent just that from happening. an easy repair if yours is so equipted..good luck. Tom, K6TC*** Okay, so I'm a klutz. I wired up the power connector in reverse with no fuse in the

RE_ [Repeater-Builder] DB-4018 cavity

ost a dead area up here and technicians are very hard to find for any of the Ham equipment let alone anything in the 220 MHz range? My name is Tom Corso, K6TC, I am good in the Call book and can be reached through my cell phone of 541-217-4329 or house phone of 541-759-3772 day or early evening

Re: [Repeater-Builder] Re: Radio for repeater use Response to Tom's comments

with stations. Of course the tower building was a constant 74oF in the Texas sun and the A/C ran most of the winter. It's a shame there's not another antenna on the tower you could "borrow" for a few minutes. thp W3ML wrote: Thanks Tom, Getting help around here is

Re: [Repeater-Builder] Re: Radio for repeater use Response to Tom's comments

gt; Ask the people you got the radio from if they had the same problem with it. > > Chuck > WB2EDV > > > > - Original Message - > From: "W3ML" > To: <mailto:Repeater-Builder%40yahoogroups.com>> > Sent: Monday, October 05, 2009 8:33 PM > Subjec

Re: [Repeater-Builder] Re: Radio for repeater use Response to Tom's comments

ario today, I would ask what the wind was like? If memory serves me correctly, that G7 has a couple of joints and is somewhat flimsy in terms of material strength and antenna height. There ya go, thp W3ML wrote: Hi Tom, I did crank up the power to 55 watts out of radio and that gives me

[Repeater-Builder] RE: OT: Tape

t with no gooey mess but you've probably gathered that from the comments here. Hope this helps. Tom, N6MVT

[Repeater-Builder] Tram 1481 Dual Band UHF/VHF Antenna

ke a small sponge. Replacing these and repainting the fiberglass (white or light gray PLASTIC spray paint) fixed the problem. The point is, all 4 brands are at risk of the same long term problem. Tom

[Repeater-Builder] Need a TLD-2601A PA

ty PA. If anyone has one available we are interested. We are in the Baltimore Washington area and could pick up within a reasonable distance (whatever the heck that is!) rather than shipping the fairly heavy unit. 73 de Tom/W4OKW (K3HKI Rpt)

[Repeater-Builder] Re: S-COM 7330

etter product. I don't think you'll be dissapointed; we certainly haven't been. Hope this helps. Tom,N6MVT www.carlaradio.net

Re: [Repeater-Builder] Motorola CDM 1250

Although I don't have my programming computer in front of me, you need to go to the last thing in the tree and add each personality for the channels you added high up in the tree. They will apear in the radio's display after you have added the personalities. If you think the 1250 is a bad ani

Re: [Repeater-Builder] Service manuals

Where are you loacted CHris? ccour79992 wrote: I have 5 boxes of mostly Motorola service manuals, some GE. Mostly 60's & 70's vintage, i.e. micor, mocom, ht200, flexar, remotes, base, mobiles, etc. I can send you a file with the list. Free to good home/amateur use, but you must come get

Re: [Repeater-Builder] Fw: [DSTAR_DIGITAL] FCC Ruling on Repeater Definition

Voice mail on a repeater just like our analog repeaters. Still, it is a moot point for a D-STAR repeater as the voice stream is not recorded before being retransmitted. 73, Tom n4zpt Jeff Condit wrote: > What do you call it when messages are recorded and then > retransmission begins right

Re: [Repeater-Builder] Fw: [DSTAR_DIGITAL] FCC Ruling on Repeater Definition

. 73, Tom n4zpt Kris Kirby wrote: > The only interesting wrinkle in this is that a linear transponder > doesn't "retransmit". The signal is never decoded to baseband and > retransmitted. > > Or is it? With I+Q demodulation and remodulation, this could be a point

[Repeater-Builder] Re: Decibel dipole array sweeps

of the dipole elements, to help get the Return Loss even better at lower freqs. Not sure what, if any, skewed pattern is introduced by doing the machine screw mod or not. Quite often it's hard to tell any changes in the field unless it is very drastic. Tom

[Repeater-Builder] Audio issues w/XPR-8300 + external controller

m (~6-8 months ago) regarding operation and tuning. They basically look at this as a digital repeater and the analog side is essentialy a "freebie" so... I think you know. Thanks in advance for any input. Tom

Re: [Repeater-Builder] Somewhat OT - How to make HDTV *really* work

You realize that Ch 7 digital may be on Ch 39 analog's frequency even though it comes in as CH 7 Digital. wd8chl wrote: Paul Plack wrote: > Jim, > > You might want to "READ IT AGAIN" yourself. Here's where the > misunderstanding started. > > John wrote that if the digital is on a very differen

Re: [Repeater-Builder] Re: Motorola and GE Service Manuals

ould have, but didn't. Now I know the manuals are gone... thp Tom Parker wrote: Send me your e-mail... I'm in Gainesville. I'll meet you at WalMart tomorrow for them. wb5dcu wrote: --- In Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com>, &q

Re: [Repeater-Builder] Re: Motorola and GE Service Manuals

Send me your e-mail... I'm in Gainesville. I'll meet you at WalMart tomorrow for them. wb5dcu wrote: --- In Repeater-Builder@yahoogroups.com , "wb5dcu" wrote: > > I have 7 boxes of Motorola and GE service manuals that run from the > early 60's to t

[Repeater-Builder] M9760 Sub

Anyone in the group know of a successful substitute for the M9760 FET used in the Micor VHF Preamp? Thanks, Tom

[Repeater-Builder] Repeater controller for sale

over $250 paypal accepted buyer must pay shipping and paypal fees as well.This was the replacement for the famous ACC controller line. Email me directly for more info 73s NB2A Tom

Re: [Repeater-Builder] Re: Anybody have an email address or a phone number for K5JXM ?

I am sorry, if you are alive, even dead, pay/paid taxes, have/had a Social Security Number, a drivers license, etc... your information is out there in public. Paul Plack wrote: Chris, I guess I'm missing your point,too.. If Jesse agreed to have his info in an internet-accessible public d

[Repeater-Builder] Re: Off Topic

;t find a copy, contact me off list, I may be able to help. Tom --- In Repeater-Builder@yahoogroups.com, "Mark" wrote: > > Nope - this is an OLD machine. No USB, no SCSI. > > > > What I am really needing to find are the DOS/Win95 device drivers for the CD >

[Repeater-Builder] Six Meter Repeater Noise Issues

y less than 100 feet from our house that I wonder is the culprit. I don't hear any arcing or power line noise with just the receiver squelch open but maybe when I transmit there is some mixing going on? Thank You Tom Elmore KA1NVZ Anchorage, Alaska

Re: [Repeater-Builder] Converting a Range 2 VHF Mitrek to Range 1 (WAS: Holiday Special...)

Hello Kevin I did not see where you gave a price of a set of Micor receiver coils. Where might I find this info? Thanks. 73 de Tom Manning, AF4UG - Original Message - From: Eric Lemmon To: Repeater-Builder@yahoogroups.com Sent: Saturday, December 20, 2008 9:37 PM

Re: [Repeater-Builder] Converting a Range 2 VHF Mitrek to Range 1 (WAS: Holiday Special...)

same nothing would prohit a person from doing this. As I said earlier I know for a fact that the mid band receivers will not tune lower than 146 Mhz. Perhaps an occasional one would be found that would tune to 144.0 Mhz but not all. Thanks. 73 de Tom Manning, AF4UG - Original Message

Re: [Repeater-Builder] Holiday Special - MICOR 2 meter receiver conversion from W3KKC

. Thanks. 73 de Tom Manning, AF4UG - Original Message - From: Kevin Custer To: Repeater-Builder@yahoogroups.com Sent: Thursday, December 18, 2008 10:02 PM Subject: Re: [Repeater-Builder] Holiday Special - MICOR 2 meter receiver conversion from W3KKC Tom, You say you find

Re: [Repeater-Builder] Holiday Special - MICOR 2 meter receiver conversion from W3KKC

about the Micor coils working for Mitrek. Thanks. 73 de Tom Manning, AF4UG - Original Message - From: Kevin Custer To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December 16, 2008 8:44 PM Subject: Re: [Repeater-Builder] Holiday Special - MICOR 2 meter receiver conversion

Re: [Repeater-Builder] Holiday Special - MICOR 2 meter receiver conversion from W3KKC

Good afternoon Kevin My need is to convert two or more Mitrek receivers to cover 145.49Mhzz, which is our receive freq for our repeater. Thanks. 73 de Tom Manning, AF4UG - Original Message - From: Kevin Custer To: Repeater-Builder@yahoogroups.com Sent: Tuesday, December

Re: [Repeater-Builder] Holiday Special - MICOR 2 meter receiver conversion from W3KKC

Good morning Kevin I have a question. Will these coils also work in a Mitrek? Thanks. 73 de Tom Manning, AF4UG - Original Message - From: Kevin Custer To: Repeater-Builder@yahoogroups.com ; motorola-mi...@yahoogroups.com Sent: Monday, December 15, 2008 6:17 PM Subject

[Repeater-Builder] Want to buy a TS 64 comm spec

Anyone have one they do not need? Please email me with info Tom NB2A

[Repeater-Builder] Want to buy a 2 meter 6 cavity repeater duplexer

If anyone has one for sale please email me directly with info 73s NB2A Tom

[Repeater-Builder] Versatone chip wanted

Repeater BuilderAnyone out there got a spare 146.5 Hz GE Versatone chip (19C320291G1) they would like to pass on? This is for an MVP. I have a 138.5 chip in there now. Buy or trade. 73 de Tom/W4OKW

[Repeater-Builder] GE MLS ham conversion?

I have a UHF GE MLS1 (eeprom one) that I would like to convert to the ham frequencies. Has anyone tried this? Electrically, it looks fairly straightforward. Has anyone tried out of band hacks for the programmer or is that necessary? Any information would be appreciated. Tom WB6DGN

[Repeater-Builder] Re: Motorola TLD-1100 Wanted,please help if you can.

ntrol head, appearance wise, but, electrically, they still were direct plug in to all of the units. Otherwise, I can't help; I threw out the last one I had, a GE Mastr Pro, a couple of years ago. Seems to me I read some posts about one of those not too long ago on one of these sites. Good

[Repeater-Builder] Service Info. for Mot. Alert Monitor RX

umber is M03CNB1100A-SP33. Also, can anyone suggest a source of Nixie tubes for another project I'm about to attempt. Thanks, Tom KB5DPE

Re: [Repeater-Builder] R1225 Radio

: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Tom Parker Sent: Sunday, October 05, 2008 5:56 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] R1225 Radio You can use a GM300 head. skydiver297 wrote: Just received a R1225 radio. No duplexe

Re: [Repeater-Builder] R1225 Radio

You can use a GM300 head. skydiver297 wrote: Just received a R1225 radio. No duplexer or power supply with this radio. No GR1225 Housing, just a basic radio. Want to use the radio as just a base station, no repeater. Couple of questions. How can I control this radio? Does it have a remote he

[Repeater-Builder] 6 Meter Repeater Desense issues.

oving the cap moves it up to 52 to 54. My repeater frequencies are 52.810 out and 51.110 in. So I need to either move my input frequency up or so If I play with the value of the cap say 12 to 25 pf and make the antenna resonate somewhere from 51 to 53 Mhz? Thank You Tom Elmore KA1NVZ Anch

RE: [Repeater-Builder] LMR-400 Cable

This tells me something is going on with the antenna and coming back the line. Is it time to put in some hardline? Tom / KA1NVZ -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Thursday, October 02, 2008 8:47 PM

[Repeater-Builder] Re: Portable Temporary Repeater

<<"Observations, suggestions, and your crazy are appreciated!">> Unfortunately I have to add myself to the list of naysayers but to answer as you requested: "Basically the question is: at a 2 mhz seperation (odd split) on VHF can one get away without using duplexers (cans), utilizing separate rx/

[Repeater-Builder] LMR-400 Cable

Is the 400 really not that suitable for duplex operation even at 6 meters? What would be a good alternate choice ? Thank You Tom Elmore KA1NVZ Anchorage, Alaska

Re: [repeater] RE: [Repeater-Builder] Wits End -- Desense

Congratulations John! And we can certainly afford to buy replacement custom cables. 73, Tom n4zpt John Transue wrote: > Eric, Bob, and many other good folks, > >Success This being a holiday, I could not get RG400 to replace > the cable from the TX to the connector on the

[Repeater-Builder] Re: Curious Situation

ake them work right. All of a sudden the test equipment became a real bargain and I KNEW that what I turned out was right. Tom -- In Repeater-Builder@yahoogroups.com, "Michael Ryan" <[EMAIL PROTECTED]> wrote: > > Rber's, I posted a note very early this week about my l

[Repeater-Builder] Re: 23cm antenna for DSTAR

There isn't going to be much warning before that RF output module self-destructs. When he has to foot the bill for a new RF module (or even transistors), even if he replaces it/them himself, I'll bet that power set pot will be glued in place at 10 watts. Just hope he isn't too l

[Repeater-Builder] Re: Receiver for 6 meters

a couple of parts donors. Tom --- In Repeater-Builder@yahoogroups.com, "JOHN MACKEY" <[EMAIL PROTECTED]> wrote: > > Even if/when Permakay filters are no longer available from Motorola, I think > there will be enough old Motrac receivers laying around to steal parts from. &g

[Repeater-Builder] Re: Receiver for 6 meters

less common brands, if no one here makes any offers. Tom -- In Repeater-Builder@yahoogroups.com, "mickupi" <[EMAIL PROTECTED]> wrote: > > I need a good receiver for our 6 meter repeater. It is on > 53.090/52.090. What would be a good radio to look for. Preferably

[Repeater-Builder] OFF TOPIC Re: New 6M Repeater in Central NH

OFF TOPIC Wish I'd have read the posts from the wannabe's before I posted this. I would have made my comments anyway just for spite. Tom --- In Repeater-Builder@yahoogroups.com, "Tom" <[EMAIL PROTECTED]> wrote: > > OFF TOPIC Thanks Kevin, but after a day or so

[Repeater-Builder] OFF TOPIC Re: New 6M Repeater in Central NH

to make it known with considerable suspicion. Enough said, back to the "Good Stuff". Tom --- In Repeater-Builder@yahoogroups.com, Kevin Custer <[EMAIL PROTECTED]> wrote: > > Tom wrote: > > Dear Repeater-Builder administrators: > > I've got a few things to

[Repeater-Builder] Re: New 6M Repeater in Central NH

"...theres nothing more to add." Now, how would you know that? I'll wait for an administrator's opinion and abide by that, thank you. I DO believe that I have something to say in spite of you pompous denial. Tom "--- In Repeater-Builder@yahoogroups.com, "de W

[Repeater-Builder] Re: New 6M Repeater in Central NH

yalty (Motorola vs. GE). It is here for providing quality technical information." which I take to include prohibitions on comments on license class. Tom -- In Repeater-Builder@yahoogroups.com, Nate Duehr <[EMAIL PROTECTED]> wrote: > > >> > >> Sorry had to rant there --

[Repeater-Builder] Re: New 6M Repeater in Central NH

nt on this. Should I respond on this thread, begin a new thread or refrain from comment altogether? Tom --- In Repeater-Builder@yahoogroups.com, Nate Duehr <[EMAIL PROTECTED]> wrote: > > > On Jul 25, 2008, at 8:40 AM, Jason Greene wrote: > > > --- In Repeater-Builde

[Repeater-Builder] Re: just thinking

Now THAT takes skill! I can't even imagine someone doing that. Do you know what his occupation is? Is it related? Tom --- In Repeater-Builder@yahoogroups.com, "Paul Plack" <[EMAIL PROTECTED]> wrote: > > I think this comes down to a matter of personality types. I

[Repeater-Builder] Re: PL Problem

es a combination of both VCO and reference oscillator, to eliminate this "hunting" phenomenon. I have seen schematics of a few ham radios where PL modulates only the VCO, but I have never had one on test equipment to see if it is free of the hunting. Perhaps I just missed the PL audio path

[Repeater-Builder] Re: just thinking

see a blank wall, look for help. You just may be VERY pleased with the result. Tom --- In Repeater-Builder@yahoogroups.com, Jim Brown <[EMAIL PROTECTED]> wrote: > > Tom, its really a matter of productivity.  Doing something as a hobby is one thing, and you do learn more by doing it

[Repeater-Builder] Re: just thinking

takes because, once the product is complete to my satisfaction, the project is over for me. If I can't find a home for it with some club, I will just dismantle it and move on. Again, just a different perspective; not meant to ruffle anyone's feathers. Tom --- In Repeater-Builder@yaho

[Repeater-Builder] Re: just thinking

uot;mystery" is gone. Just my 2cents. Tom --- In Repeater-Builder@yahoogroups.com, Jim Brown <[EMAIL PROTECTED]> wrote: > > Amen to that !!!  40 years ago would have been even better - (if there had been an internet) > > 73 - Jim  W5ZIT > > --- On Sat, 7/19/08, JOHN MA

[Repeater-Builder] Re: RadioShack Recalls Power Supplies

of an industry standard rating, it's better than nothing. Tom -- In Repeater-Builder@yahoogroups.com, "Eric Lemmon" <[EMAIL PROTECTED]> wrote: > > Ron, > > That is a good question. The answer is that one is not supposed to connect > any load greater than 12 am

[Repeater-Builder] Re: RadioShack Recalls Power Supplies

That's the problem. Nothing/nobody delivers what it/they're "rated"/expected to deliver. I do not consider it acceptable for shysters to shirk their responsibility by citing "engineering practice" as an excuse. Tom --- In Repeater-Builder@yahoogroups.com, &qu

[Repeater-Builder] Re: RadioShack Recalls Power Supplies

redibility in the world market. Just like the "half gallon" of ice cream that now weighs 48 ounces; and I could go on and on! ONLY in the US. Tom 1 -- In Repeater-Builder@yahoogroups.com, "Eric Lemmon" <[EMAIL PROTECTED]> wrote: > > Ron, > > Tha

[Repeater-Builder] Re: do you believe this

vertising as an insult to my intelligence. Tom --- In Repeater-Builder@yahoogroups.com, "Richard" <[EMAIL PROTECTED]> wrote: > > Nope. > > Richard > <http://www.n7tgb.net/> www.n7tgb.net > > > _ > > From: Repeater-Builder@yahoogr

[Repeater-Builder] Re: ISO Slow Computer for R100 repeater programming

Salvation Army or Goodwill stores. I always see some in those types of stores and I go there for old accessories like (large) DIN plug keyboards, etc. They're not always out front, ask for the "guy that works on the computers". He'll probably have some in back that he th

Re: [Repeater-Builder] ISO Slow Computer for R100 repeater programming

You can get them on eBay for under $50.00 if you're patient. We use PII's running around 250 MHz, although I've successfully use a PIII @ 600 MHz (my specific laptop for RSS). John Reid wrote: Where does one fine a CHEAP but reliable old computer for this purpose. I understand that if the c

[Repeater-Builder] Re: SPAM was amber alert, SNOPES VERIFIED, sent to you by Dan Long

Also, Tony, you misquoted me. --- In Repeater-Builder@yahoogroups.com, "Tom" <[EMAIL PROTECTED]> wrote: > > << However personal attacks such as using terms like "miserable life > of yours">> > > I agree, that was a poor choice of words, ho

[Repeater-Builder] Re: SPAM was amber alert, SNOPES VERIFIED, sent to you by Dan Long

I may have overreacted to the tone of the post, MANY others overreacted to ONE piece of perceived "spam", knowing full well that it was not likely to happen again for a long time, if ever. I'm outta here to go lick my wounds, this thread has already received far more attenti

[Repeater-Builder] Re: SPAM was amber alert, SNOPES VERIFIED, sent to you by Dan Long

t it's two years old only adds to the desperation those parents must be feeling over this. Don't forget, you are a living being first (even if it is only a human) and a ham second (or third or fourth or tenth). You would do well to try to show some compassion in that, seemingly, miserabl

[Repeater-Builder] Re: Tool needed for removing Potentiometer nuts

ver" <[EMAIL PROTECTED]> > Date: Fri, July 11, 2008 1:02 am > To: repeater-builder@yahoogroups.com > > I have a yaesu FT-60 handheld that has a noisy volume pot and need to > change it, the nuts have slots on the top side of the nut 180 degrees > apart and I can not get needle nose pliers on them so I need the correct > tool. > > Anybody know what they are called and where to get one? > > tom n8ies >

[Repeater-Builder] Re: Tool needed for removing Potentiometer nuts

available for their equipment. I'd give Yaesu a try first but I would think you could also find them at some of the bigger electronics supply houses. Good Luck, Tom --- In Repeater-Builder@yahoogroups.com, "Thomas Oliver" <[EMAIL PROTECTED]> wrote: > > I have a yaesu F

[Repeater-Builder] Re: RadioShack Recalls Power Supplies  Due toElectrocution and Fire Hazards

ed to buy was made in China; that is now a way of life for me. They could care less about us once they get our money, much less our safety! Tom --- In Repeater-Builder@yahoogroups.com, Ron Wright <[EMAIL PROTECTED]> wrote: > > I believe RS has to take the supply back and rewire or fix

[Repeater-Builder] Re: RadioShack Recalls Power Supplies Due toElectrocution and Fire Hazards

of the same thing; I didn't read what's different about it. Anyway, they do still have one available. Tom --- In Repeater-Builder@yahoogroups.com, Nate Duehr <[EMAIL PROTECTED]> wrote: > > > On Jul 4, 2008, at 5:30 PM, Thomas Oliver wrote: > > > I highly recomend

[Repeater-Builder] Re: RadioShack Recalls Power Supplies Due to Electrocution and Fire Hazards

never ASS-ume that a line is dead until you confirm it. Had my other hand been grounded, I probably wouldn't be telling this story now. Tom --- In Repeater-Builder@yahoogroups.com, "Eric Lemmon" <[EMAIL PROTECTED]> wrote: > > Don, > > Your dad is a man I c

[Repeater-Builder] Re: RadioShack Recalls Power Supplies Due to Electrocution and Fire Hazards

(not even the bathroom) had the third wire ground actually connected. All of the others were wired with 2-wire Romax and NO ground. Now, if that isn't a booby trap, I don't know what is. So, unlike me, don't assume anything. Buy a cheap line tester and check every outlet you have

Re: Re: [Repeater-Builder] FS-MSR2000 VHF Exciters

know what the outcome of this will be. From my perspective he made the mistake. I was unable to do anything aabout it with paypal. The outcome will be interesting. 73 de Tom MAnning, AF4UG - Original Message - From: Ron Wright To: Repeater-Builder@yahoogroups.com Sent: Tu

Re: [Repeater-Builder] FS-MSR2000 VHF Exciters

Hello Gerry I am having problems with your address and get the mail returned. I have in the last hour sent you a paypal for $55. Pls send me a return message when you find it credited to your account. I am not used to sending a paypal payment. My ship to address is Tom Manning, AF4UG

Re: [Repeater-Builder] Re: anyone know backdoor to csi tone panels

I think you can remove the battery for 30 minutes or so and it will revert back to factory defaults. I know we do that for Trident controllers... can't remember for sure on the CSI's, but I think that's correct. thp Mike Dietrich wrote: Hi group, Does anyone know of a backdoor code or a wa

Re: [Repeater-Builder] Fw: Thank You, Lord

And you just resent it all.. May not have been the best place to send it to, but thanks Ralph. The little Heavens note was most welcome to me. Tom WA0RTU Tony Lelieveld wrote: > > Moderators, > > > > Why are we getting jokes on this list server? Isn’t there enough

[Repeater-Builder] R2001-D Alignment Needed

One of our 2001-D monitors is losing it's horizontal position on the display. At this rate, it won't be long before the frequency line will be above the top of the bezel. Does anyone on this group have a service manual for these beasts? Perhaps you could point me in the right direction in t

Re: [Repeater-Builder] Motorola R1225 UHF

Hello Cort I also have a 1225 and intend to do the same with it. I hsve not yet began any work. Hope you have success. Pls let me know if you have problems. Thanks greatly. 73 de Tom MAnning, AF4UG - Original Message - From: Cort Buffington To: Repeater-Builder

  1   2   3   >