Chúc mừng Thanh (Ninomax ) nhận được suất học bổng này :)
--
Khanh Le Ngoc Quoc
2010/5/4 Lê Viết Thanh lethanh...@gmail.com
FYI
-- Forwarded message --
From: Khanh Le Ngoc Quoc khanh@gmail.com
Date: 2010/4/30
Subject: [OSGeo Vietnam] Re: State of the Map 2010 Travel
Tagal na 'to actually :) I have a live list somewhere of all the
websites using the openstreetmap.org.ph widget... let me find it...
___
talk-ph mailing list
talk-ph@openstreetmap.org
http://lists.openstreetmap.org/listinfo/talk-ph
Hi,
Apologies for this off-topic posting (not everyone here is using the
osm-ph garmin map).
I have made a few modifications in the garmin map. Most of them are
simple display and styling tweaks.
I think the most important of all the minor tweaks is the addition of
a time penalty when using
AMERICA I think this sums up common sense and the ability to think for
oneself...
SAN FRANCISCO—A woman hit by a car while walking on a route provided by
Google's online mapping service is suing the Internet colossus for not
recommending a safer path. Lauren Rosenberg of Los Angeles is asking
Hi all,
I didn't have time for this the past days, so here it is again with a little
delay. I had to plow through about 300 messages today, so I went through them
somewhat faster and there may be a chance I left out important bits... But
some discussion are really just too boring to read :-)
Thank you Ben,
This is really useful!
Denis
On Tue, Jun 1, 2010 at 7:57 PM, Ben Laenen benlae...@gmail.com wrote:
Hi all,
I didn't have time for this the past days, so here it is again with a little
delay. I had to plow through about 300 messages today, so I went through them
somewhat
I second this - very useful!
Thanks for taking the time to aggregate!
Tim
On Tue, 2010-06-01 at 21:21 +0200, Denis Jacquerye wrote:
Thank you Ben,
This is really useful!
Denis
On Tue, Jun 1, 2010 at 7:57 PM, Ben Laenen benlae...@gmail.com wrote:
Hi all,
I didn't have time for
Yes tanks a lot!
I' cant follow the ML with all the traffic... but this keep me aware of
things .
Thanks Again
On Tue, Jun 1, 2010 at 21:46, Tim Francois sk1pp...@yahoo.co.uk wrote:
I second this - very useful!
Thanks for taking the time to aggregate!
Tim
On Tue, 2010-06-01 at 21:21
John F. Eldredge wrote:
I would say that her odds of winning the damages, or, for that matter, of
having a court agree to hear the case at all, are pretty low. If you are
using a map of any sort, you are still expected to use common sense as well.
If a map tells you to drive through a
On Tue, Jun 1, 2010 at 2:07 AM, John Smith deltafoxtrot...@gmail.com wrote:
On 1 June 2010 09:52, Tim McNamara paperl...@timmcnamara.co.nz wrote:
Still, even if they breached the duty of care, the injured woman will still
need to establish that the breach was a cause of her injury.
The only
On 1 June 2010 17:04, Nic Roets nro...@gmail.com wrote:
That's an interesting article. But the details are sketchy: 300,000
out of a total of how many ? Are there any controlled studies where
I don't think there needs another total, I'm guessing people blamed
the accident on their satnav when
A nice example of using non-geographic tags (business name, contact details,
opening hours etc)
would be to point out openstreetbrowser ;-)
On Tue, Jun 1, 2010 at 1:45 AM, john whelan jwhelan0...@gmail.com wrote:
Is it worth doing a small article on OSM for them? It might be worth
pointing
2010/5/31 Anthony o...@inbox.org:
On Mon, May 31, 2010 at 3:13 PM, Ian Dees ian.d...@gmail.com wrote:
If they are not marked, how do the locals know what and where they are?
They look at a map!
No, they don't have to look at a map, that's the point: they simply
_know_ it, they use the name
2010/5/31 Anthony o...@inbox.org:
2010/5/31 Ian Dees ian.d...@gmail.com
I don't think anyone has suggested that we leave out things I'd they
aren't signposted.
Nathan, who started this thread, has done exactly that, and he's gone around
removing route relations where the routes were not
Hi,
John Smith wrote:
http://searchengineland.com/woman-follows-google-maps-walking-directions-gets-hit-sues-43212
I wonder if she's eligible for an honourable mention from the darwin awards?
After all the brouhaha maybe there's time for some serious thought.
Without knowing the exact
On Tuesday 01 June 2010 14:09:01 Frederik Ramm wrote:
know how and where to call one. But wait! There's the Blackberry with
experimental Google maps on it, and lo and behold, it says your
destination is only 25 minutes away on foot...
strange - in my country I would just ask some one -
On Tue, 1 Jun 2010, Kenneth Gonsalves wrote:
strange - in my country I would just ask some one - never fails
you must be a bit older and used to older methods
:)
last time I got asked for where is a street I was out mapping, so oddly
although 500km from home I did know where the street was, and
On Sat, May 29, 2010 at 11:46 PM, Nathan Edgars II nerou...@gmail.com wrote:
Right now, the only mention of the on the ground rule on the wiki is
here: http://wiki.openstreetmap.org/wiki/Disputes#On_the_Ground_Rule
Should a separate page be created about how it applies more generally?
The on
On 1 June 2010 09:39, Frederik Ramm frede...@remote.org wrote:
Hi,
John Smith wrote:
http://searchengineland.com/woman-follows-google-maps-walking-directions-gets-hit-sues-43212
I wonder if she's eligible for an honourable mention from the darwin
awards?
After all the brouhaha maybe
1... What's the correct way of tagging a street as 'dangerous/suicidal' for
pedestrians in OSM? (Couldnt find an answer in the wiki)
Recently come across a road in my area (London, UK) that had no pavement and
which clearly should be avoided by pedestrains, but there were no
restrictions in place
On 1 June 2010 22:33, Jason Cunningham jamicu...@googlemail.com wrote:
2...Had a look at that American road in Google Satelitte
(http://tinyurl.com/33dvn78) If I was that women I'd be more worried about
the colour of the Golf Courses. That's the most unnatural shade of green
I've ever seen.
I stumbled across this today:
http://www.ikimap.com/ikimapa/310
The terms of use link points at Google's Map terms of use, but the map
layer underneath looks unlike Google's, yet strangely familiar...
___
talk mailing list
talk@openstreetmap.org
On 1 June 2010 13:33, Jason Cunningham jamicu...@googlemail.com wrote:
1... What's the correct way of tagging a street as 'dangerous/suicidal' for
pedestrians in OSM? (Couldnt find an answer in the wiki)
Recently come across a road in my area (London, UK) that had no pavement and
which clearly
On Tue, Jun 1, 2010 at 8:24 AM, SomeoneElse li...@mail.atownsend.org.ukwrote:
I stumbled across this today:
http://www.ikimap.com/ikimapa/310
The terms of use link points at Google's Map terms of use, but the map
layer underneath looks unlike Google's, yet strangely familiar...
It appears
On Tue, Jun 1, 2010 at 9:32 AM, Matt Williams li...@milliams.com wrote:
On 1 June 2010 13:33, Jason Cunningham jamicu...@googlemail.com wrote:
1... What's the correct way of tagging a street as 'dangerous/suicidal'
for
pedestrians in OSM? (Couldnt find an answer in the wiki)
Recently come
Hi there,
this is not my proposal, but as RfC was forgotten I ask for your comments now.
http://wiki.openstreetmap.org/wiki/Proposed_features/Playground_Equipment
Regards
Lulu-Ann
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter
On Tue, Jun 1, 2010 at 3:32 PM, Matt Williams li...@milliams.com wrote:
The road should simply be marked as having no pavement/sidewalk.
Something like pavement=yes/no is a start at least. It's best to avoid
subject assessments like how dangerous a road is.
Ideally, yes. But routing software
On Tue, Jun 1, 2010 at 4:38 PM, Elena of Valhalla
elena.valha...@gmail.com wrote:
On 6/1/10, Nic Roets nro...@gmail.com wrote:
If you don't trust your own opinion, ask a few locals if they would
advise a tourist to walk there. If they say no, then tag them with
foot=no and add a note
On Tue, Jun 1, 2010 at 10:23 AM, Nic Roets nro...@gmail.com wrote:
On Tue, Jun 1, 2010 at 3:32 PM, Matt Williams li...@milliams.com wrote:
The road should simply be marked as having no pavement/sidewalk.
Something like pavement=yes/no is a start at least. It's best to avoid
subject
On Tue, Jun 1, 2010 at 5:22 PM, Anthony o...@inbox.org wrote:
Ideally, yes. But routing software can't possibly process the logic
correctly in cases like these. Some roads may not have a pavement, but
they are safe for pedestrians due to the lack of traffic. In other
cases extreme footways
2010/6/1 Anthony o...@inbox.org:
The road should simply be marked as having no pavement/sidewalk.
Something like pavement=yes/no is a start at least. It's best to avoid
subject assessments like how dangerous a road is.
Hmm, is shoulder a fairly universal term? Because shoulder=no would be
On Tue, Jun 1, 2010 at 11:43 AM, M∡rtin Koppenhoefer
dieterdre...@gmail.com wrote:
2010/6/1 Anthony o...@inbox.org:
The road should simply be marked as having no pavement/sidewalk.
Something like pavement=yes/no is a start at least. It's best to avoid
subject assessments like how dangerous a
Am 01.06.2010 15:31, Ian Dees:
On Tue, Jun 1, 2010 at 8:24 AM, SomeoneElse li...@mail.atownsend.org.uk
mailto:li...@mail.atownsend.org.uk wrote:
I stumbled across this today:
http://www.ikimap.com/ikimapa/310
The terms of use link points at Google's Map terms of use, but the
El día Tuesday 01 June 2010 15:24:55, SomeoneElse dijo:
http://www.ikimap.com/
I met these guys a few months ago. Basically they know about OSM, they know
about G MapMaker. They've got a potential market, but they know they are a
few years behind collaborative map making... :-/
--
Iván
On Mon, May 31, 2010 at 6:20 PM, Anthony o...@inbox.org wrote:
Looking more closely, there is a sidewalk, which turns into a cycleway
(http://www.openstreetmap.org/browse/way/40967519), about 50 feet from the
roadway, on the southbound side which is the same side she was walking on.
And if
Jeffrey, when the thread was started the cycleway was incorrectly
tagged, but I fixed it soon afterwards. Cloudmade will catch up soon
enough.
On Tue, Jun 1, 2010 at 9:05 PM, Jeffrey Ollie j...@ocjtech.us wrote:
On Mon, May 31, 2010 at 6:20 PM, Anthony o...@inbox.org wrote:
Looking more
Shouldn't the text actually say at least 'OpenStreetMap' somewhere, rather
than just 'Terms of use'. With my simple understanding of the attribution
license.
I prefer that because it makes sure the name is getting out there next to
our work.
IkiMaps? Is it like the wikipedia for maps? ;o)
Or just use the plus sign on the right and use the data overlay. That works
nicely for Canada. I have some sample Ottawa businesses I've dropped in. I
suppose I could even write a few words round couple of examples.
Cheerio John
On 1 June 2010 04:18, Ken Guest k...@linux.ie wrote:
A nice
On Tue, Jun 1, 2010 at 9:38 PM, John Smith deltafoxtrot...@gmail.comwrote:
On 2 June 2010 10:23, Anthony o...@inbox.org wrote:
You seem to have missed the rest of my post. I was arguing that a road
with
no pavement but with a shoulder is *not* unsafe. OTOH, if the road has
no
shoulder,
On 1 June 2010 23:30, Andy Allan gravityst...@gmail.com wrote:
The on the ground rule is only appropriate for disputes, and
shouldn't be used as an instruction of what should or should not be
mapped (for that, see the guidelines on verifiability).
The on the ground rule is that when two
On 2 June 2010 12:04, Anthony o...@inbox.org wrote:
So, technically, here in Florida, walking on the roadway when there is a
shoulder available (and practicable) would be illegal. Interestingly,
shoulder does not seem to be defined in the law, but I've always assumed
it meant the part of the
On 2 June 2010 12:08, Robin Paulson robin.paul...@gmail.com wrote:
this reminds me of a situation i've come across in auckland, which i
don't know the solution to. there's a major road, which apparently has
three names:
The Strand (on signposts)
Shipwright Lane (on different signposts)
It's come up in the past about unique IDs for objects, some people use
OSM IDs for this, however someone has come up with a different way to
do this, make a QR code and stick it to the object and use the QR
codes ID number:
You stole my id ;) I have used osm stickers + ids for that.
A photo is on the wiki ;)
Stefan
Op 2 jun 2010 om 04:29 heeft John Smith deltafoxtrot...@gmail.com
het volgende geschreven:\
It's come up in the past about unique IDs for objects, some people use
OSM IDs for this, however someone
On 2 June 2010 12:08, Robin Paulson robin.paul...@gmail.com wrote:
this reminds me of a situation i've come across in auckland, which i
don't know the solution to. there's a major road, which apparently has
three names:
The Strand (on signposts)
Shipwright Lane (on different signposts)
On 2 June 2010 13:16, Stefan de Konink ste...@konink.de wrote:
You stole my id ;) I have used osm stickers + ids for that.
Any suggestions on mass producing them?
A photo is on the wiki ;)
URL?
___
talk mailing list
talk@openstreetmap.org
Tumbleweed writes How to make Steve Jobs your mortal enemy:
Smokescreen, a 175KB, 8,000-line JavaScript-based Flash player written
by Chris Smoak at RevShock, a mobile ad startup, and to be
open-sourced 'in the near future.' From Simon's blog: 'It runs
entirely in the browser, reads in SWF
On 1 June 2010 09:39, Frederik Ramm frede...@remote.org wrote:
Hi,
John Smith wrote:
http://searchengineland.com/woman-follows-google-maps-walking-directions-gets-hit-sues-43212
I wonder if she's eligible for an honourable mention from the darwin
awards?
After all the brouhaha maybe
-- Forwarded message --
From: Mikel Maron mikel_ma...@yahoo.com
Date: Tue, Jun 1, 2010 at 5:15 AM
Subject: [OSM-dev] Map Kibera internships
To: h...@openstreetmap.org, d...@openstreetmap.org
Hi all
Our projects in Kibera have been growing fast, and we have great
opportunities
Rainer Knaepper rain...@smial.prima.de writes:
Ack. Ich habe hier in der Gegend schon einige Fußwege mit Zusatzschild
Radfahrer frei umgemapt. Das sind keine Radwege, wo auch Fußgänger
erlaubt sind.
Richtig. Das sind footway mit bicycle=yes.
Besonders knuffig fand ich mal einen cycleway,
On Tue, Jun 01, 2010 at 02:44:08AM +0200, Thomas Ineichen wrote:
Wenn Du mir sagst, wie man das macht (bzw. nach welchen Stichworten
ich googlen muss), dann schaue ich mir das gerne mal an..
Du kannst einfach dir mal via firebug die maxspeed map ansehen.
Kann man den Vektor-Layer
Hallo,
wie selektiert man einen Weg, wenn dieser auch als Umgrenzung einer
Fläche dient. Beim Anklicken erhält man meistens nur die Fläche.
--
Mit freundlichen Gruessen
Wolfgang Wienke
On Mon, May 31, 2010 at 11:44:55PM +0200, Christoph Wagner wrote:
Am 31.05.2010 21:41, schrieb Jacques Nietsch:
Hallo,
es gibt ja eine Reihe von Anbietern, die Garminkarten für viele Länder zur
Verfügung stellen.
Für bestimmte Reisen braucht man aber Karten, die übergreifende Abschnitte
Am 1. Juni 2010 08:57 schrieb Wolfgang Wienke wo_wie...@gmx.net:
Hallo,
wie selektiert man einen Weg, wenn dieser auch als Umgrenzung einer
Fläche dient. Beim Anklicken erhält man meistens nur die Fläche.
Mit der mittleren Maustaste auf den Weg klicken, dabei wird eine Liste
aller Ellemente
Moin !
gestern habe ich mir mal das Plugin slippymap installiert.
Nun soll der zugehörige Layer nicht immer angezeigt werden - kann mir
einer von Euch sagen ob man das Plugin irgendwie per Schalter temp.
ausschalten kann ??
Auf der Linken Seite habe ich keinen Knopf funden.
Gruß Jan :-)
Hi!
bei uns wird in der letzten Zeit viel von SQLite [1] berichtet.
Weiß einer von Euch ob das für kleinere Projekte eine alternative zur
großen PostGIS-DB hinsichtlich Mapnik ist und hat einer vielleicht schon
Erfahrungen sammeln können ?
Gruß Jan :-)
[1] http://de.wikipedia.org/wiki/Sqlite
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 01.06.2010 09:27, schrieb Jan Tappenbeck:
gestern habe ich mir mal das Plugin slippymap installiert.
Nun soll der zugehörige Layer nicht immer angezeigt werden - kann mir
einer von Euch sagen ob man das Plugin irgendwie per Schalter temp.
Am 01.06.10 09:20, schrieb André Riedel:
Am 1. Juni 2010 08:57 schrieb Wolfgang Wienkewo_wie...@gmx.net:
Hallo,
wie selektiert man einen Weg, wenn dieser auch als Umgrenzung einer
Fläche dient. Beim Anklicken erhält man meistens nur die Fläche.
Mit der mittleren Maustaste auf den Weg
2010/6/1 bundesrainer o...@bundesrainer.de:
Am 01.06.2010 09:27, schrieb Jan Tappenbeck:
gestern habe ich mir mal das Plugin slippymap installiert.
Nun soll der zugehörige Layer nicht immer angezeigt werden - kann mir
einer von Euch sagen ob man das Plugin irgendwie per Schalter temp.
Hi,
kann man die Default Reihenfolge der Ebenen irgendwie ändern?
Speziell soll die Ebene mit den GPX-Waypoints ganz nach oben,
damit man die Namen besser lesen kann.
Grüße
Chris
___
Talk-de mailing list
Talk-de@openstreetmap.org
Jan Tappenbeck o...@tappenbeck.net wrote:
Weiß einer von Euch ob das für kleinere Projekte eine alternative zur
großen PostGIS-DB hinsichtlich Mapnik ist und hat einer vielleicht schon
Erfahrungen sammeln können ?
http://trac.mapnik.org/wiki/SQLite
WARNING: highly uber experimental !
Ähm
Am 01.06.2010 02:24, schrieb steffterra:
Ist hiermit für motorway, motorway_link und trunk geschehen. Der
destination-Tag ansich wird diese Tage im Wiki ausführlich erklärend ergänzt.
Meine Einträge im deutschen und englischen OSM-Wiki wurden wieder gelöscht
(Norwegischer User Gnonthgol)
Hallo André,
Mit der mittleren Maustaste
Habe es mal im Wiki ergänzt:
http://wiki.openstreetmap.org/wiki/DE:JOSM/Werkzeuge#aus_.C3.BCbereinanderliegenden_Elementen_wählen
Gruss, Markus
___
Talk-de mailing list
Talk-de@openstreetmap.org
Am 01.06.2010 09:59, schrieb André Riedel:
2010/6/1 bundesrainero...@bundesrainer.de:
Am 01.06.2010 09:27, schrieb Jan Tappenbeck:
gestern habe ich mir mal das Plugin slippymap installiert.
Nun soll der zugehörige Layer nicht immer angezeigt werden - kann mir
einer von Euch sagen ob man das
Ich habe jetzt nochmal ein paar TMC-Segmente getagt, dabei bin ich jetzt
zur Meinung gekommen, da als TMC-Point zuerst einmal nur der
Kreuzungs-Knoten getagt werden sollte. Sobald es jedoch mehr als ein
Knotenpunkt mit Ab- und bzw oder Auffahrt existiert (gilt auch für
städtische Kreuzungen mit
Am 01.06.10 10:06, schrieb Chris66:
Hi,
kann man die Default Reihenfolge der Ebenen irgendwie ändern?
Speziell soll die Ebene mit den GPX-Waypoints ganz nach oben,
damit man die Namen besser lesen kann.
Es steht dir doch frei, erst die gpx oder erst die osm-Daten zu laden.
Das letztgeladene
Wenn man solche Renderhinweise taggt, dann sollten sie allgemein sein.
Ansonsten gibt es irgendwann für jeden Kartentyp spezielle Tags, die das
jeweilige Aussehen beschreiben.
Viele Grüße,
aighes
--
View this message in context:
Darüber hatte ich neulich schonmal mit Christoph gesprochen. Es gibts
dabei aber 2 Probleme :
1) Um feste Kacheln zu bekommen muss man entweder konstant splitten,
was dazu führen kann das stark wachsende Regionen nach einigen Wochen
aufeinmal zu große Kacheln haben und auf den Geräten probleme
Weiter oben wurde doch schon drauf hingewiesen, wie es mit mkgmap
funktioniert. Ihr müsst diese vorgehensweise also lediglich noch prominent
platzieren. Dazu noch einen Link zum Download von mkgmap.
Viele Grüße,
aighes
--
View this message in context:
...und am besten den Weg gleich von der Fläche trennen oder aber die Fläche
als multipolygon eintragen.
--
View this message in context:
http://gis.638310.n2.nabble.com/JOSM-Weg-selektieren-tp5124766p5125130.html
Sent from the Germany mailing list archive at Nabble.com.
Am 01.06.2010 10:44, schrieb André Joost:
kann man die Default Reihenfolge der Ebenen irgendwie ändern?
Speziell soll die Ebene mit den GPX-Waypoints ganz nach oben,
damit man die Namen besser lesen kann.
Es steht dir doch frei, erst die gpx oder erst die osm-Daten zu laden.
Ja, aber
Hallo an die Community,
nach der Datenfreigabe der Verkehrsunternehmen im VRS für OSM findet am
07.06.2010 von 17.00 - 19.00 Uhr beim Verkehrsverbund Rhein-Sieg, Glockengasse
37 - 39, ein erstes Info-Treffen statt, bei dem u.a. folgende Fragestellungen
erörtert werden:
- Wie sieht der
Am 1. Juni 2010 10:11 schrieb Chris66 chris66...@gmx.de:
Am 01.06.2010 02:24, schrieb steffterra:
Ist hiermit für motorway, motorway_link und trunk geschehen. Der
destination-Tag ansich wird diese Tage im Wiki ausführlich erklärend
ergänzt.
Meine Einträge im deutschen und englischen
Hallo Christoph,
erst einmal Danke für die schnelle Antwort.
..
die beiden gmapsupp.imgs hernehmen (ich nenne sie mal gm1.img und
gm2.img), dann mkgmap runterladen und auf der Kommandozeile folgendes
ausführen:
java -ea -jar mkgmap.jar --gmapsupp gm1.img gm2.img
und fertig ist die
Hallo,
Am 01.06.2010 11:35, schrieb Jacques Nietsch:
In der idealen Welt gäbe es die Möglichkeit auf einer Karte die
benötigten Kacheln auszuwählen, die würden heruntergeladen werden,
und danach das Verfahren von oben ablaufen.
Für diese ideale Welt böte sich an Mapsource, QLandkarte,
Am 1. Juni 2010 09:59 schrieb André Riedel riedel.an...@gmail.com:
Ich finde einen aufgeräumten Ebenen-Dialog besser.
+1, ich auch, ich bin dazu übergegangen, die entsprechenden Plugins
komplett zu deaktivieren und nur bei Bedarf einzuschalten.
Gruß Martin
Am 1. Juni 2010 12:09 schrieb M∡rtin Koppenhoefer dieterdre...@gmail.com:
Am 1. Juni 2010 09:59 schrieb André Riedel riedel.an...@gmail.com:
Ich finde einen aufgeräumten Ebenen-Dialog besser.
+1, ich auch, ich bin dazu übergegangen, die entsprechenden Plugins
komplett zu deaktivieren und nur
Am 1. Juni 2010 10:52 schrieb aighes h.scholl...@googlemail.com:
Wenn man solche Renderhinweise taggt, dann sollten sie allgemein sein.
Ansonsten gibt es irgendwann für jeden Kartentyp spezielle Tags, die das
jeweilige Aussehen beschreiben.
ich sehe das auch so. osmarender:renderName=no ist
Am 1. Juni 2010 12:17 schrieb André Riedel riedel.an...@gmail.com:
Am 1. Juni 2010 12:09 schrieb M∡rtin Koppenhoefer dieterdre...@gmail.com:
Am 1. Juni 2010 09:59 schrieb André Riedel riedel.an...@gmail.com:
Ich finde einen aufgeräumten Ebenen-Dialog besser.
+1, ich auch, ich bin dazu
Bedenkt ihr eh auch, dass die wenigsten User über genügend
Arbeitsspeicher, geschweige denn 64bit OS verfügen?
Denn wenn man noch den Addressindex geniriert, dann ist 1.3GB (das ist
ungefähr das Max unter Windows 32bit was eine einzelne Applikation
verbrauchen darf) schnell zur Neige.
Aber es
Hoi,
On Tue, Jun 01, 2010 at 08:52:32AM +0200, Florian Lohoff wrote:
Ich benutze einen OpenLayers Vector Layer:
http://dev.openlayers.org/releases/OpenLayers-2.9.1/doc/apidocs/files/OpenLayers/Layer/Vector-js.html
und lade die Daten via GeoJSON nach:
Christoph Wagner wrote:
Wie jetzt? Der Erfolg der Regel ist vom Garmintyp abhängig? Naja, mich
wundert nix mehr...
Yup. Das ist aber weitgehend unbekannt:
http://www.mkgmap.org.uk/pipermail/mkgmap-dev/2010q2/008187.html
Viele Grüße von Dani
___
Einfach mal Doku lesen...:
== INSTALL
= Libray from scratch
Geo::Proj4 uses XS to wrap the PROJ.4 cartographic projections library.
You will need to have at least version 4.4.9 of the PROJ.4 library
installed in order to build and use this module. You can get source
code and binaries for the
On Tue, Jun 01, 2010 at 02:15:20PM +0200, Sarah Hoffmann wrote:
Das geht noch einfacher mit den Strategies die OpenLayers mitliefert.
Etwa so:
vector = new OpenLayers.Layer.Vector(data, {
strategies: [new
OpenLayers.Strategy.BBOX({ratio : 1})],
On Tue, Jun 01, 2010 at 03:04:25PM +0200, Florian Lohoff wrote:
On Tue, Jun 01, 2010 at 02:15:20PM +0200, Sarah Hoffmann wrote:
Das geht noch einfacher mit den Strategies die OpenLayers mitliefert.
Etwa so:
vector = new OpenLayers.Layer.Vector(data, {
Hi there,
this is not my proposal, but as RfC was forgotten I ask for your comments now.
http://wiki.openstreetmap.org/wiki/Proposed_features/Playground_Equipment
Regards
Lulu-Ann
--
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter
On Tue, Jun 01, 2010 at 03:36:24PM +0200, Sarah Hoffmann wrote:
Die Styles werden im GeoJOSN mitgeliefert und dann per StyleMap zugewiesen.
Sprich, ein Eintrag in der GeoJOSN-Datei sieht etwa so aus:
{ type: Feature, geometry: {type: Point, coordinates:
[8.545645, 47.4117363]}
Ah alles klar, das war bei mir durch QGIS schon installiert.
Bei Ubuntu 10.04. ist übrigens proj4 4.7.0 dabei.
2010/6/1 Henry Loenwind he...@loenwind.info:
Einfach mal Doku lesen...:
== INSTALL
= Libray from scratch
Geo::Proj4 uses XS to wrap the PROJ.4 cartographic projections library.
On Tue, Jun 01, 2010 at 04:09:37PM +0200, Florian Lohoff wrote:
On Tue, Jun 01, 2010 at 03:36:24PM +0200, Sarah Hoffmann wrote:
Jetzt muss ich das SRS900913 vs WGS84 nochmal klaeren - Die URL wirft bei
strategie/protocol.http natuerlich die default projection des layers mit
raus und keinen
Am 01.06.2010 14:58, schrieb Henry Loenwind:
Einfach mal Doku lesen...:
== INSTALL
= Libray from scratch
Geo::Proj4 uses XS to wrap the PROJ.4 cartographic projections library.
You will need to have at least version 4.4.9 of the PROJ.4 library
installed in order to build and use this
gmane2...@cfaerber.name (Claus Färber) writes:
ThomasS tsch...@elchs-kramkiste.de schrieb/wrote:
woher sollen sonst Fußgänger / Radfahrer wissen, welcher Streifen für
sie bestimmt ist? Oder habe ich die Frage nicht richtig verstanden?
Dazu ist dieses Zeichen nicht da.
Nein.
Zeichen 241
On Tue, Jun 01, 2010 at 04:37:25PM +0200, Sarah Hoffmann wrote:
Die Projektion sollte eigentlich die des Layers sein. Sprich, einfach
noch die Option
projection : new OpenLayers.Projection(EPSG:4326)
beim erstellen des Vector-Layers hinzufügen. Dann sollte es gehen. Allerdings
ist es am
Moin,
Am Dienstag 01. Juni 2010 11:30:00 schrieb M∡rtin Koppenhoefer:
alternativ kann man einen Tag direkt im Wiki hinzufügen wenn er gut
etabliert ist, also bereits oft im Planetfile vorkommt. Das wäre bei
einem Tag wie hier mind. ein paar hundert mal.
Also laut Tagwatch von gestern kommt
Am 01.06.2010 um 11:30 schrieb M∡rtin Koppenhoefer:
Am 1. Juni 2010 10:11 schrieb Chris66 chris66...@gmx.de:
Am 01.06.2010 02:24, schrieb steffterra:
Ist hiermit für motorway, motorway_link und trunk geschehen. Der
destination-Tag ansich wird diese Tage im Wiki ausführlich erklärend
Hallo,
nachdem ich nun meine Probleme mit dem Modul Geo::Proj4 gelöst habe,
habe ich nun mit mapgen 1.05 versucht eine Karte mit den neuesten Daten
zu erstellen.
Folgende Fehlermeldungen mußte ich dabei entdecken:
stdout:
read style file and preprocess tile icons for areas...
looking for
Florian Lohoff f...@zz.de wrote:
So wie ich es verstanden habe, wird jede Teillinie mit dem höchsten
admin_level aller multipolygone getaggt, in dem sie enthalten ist und
damit die Datenbank entlastet. Auch da verwundert es, dass nun auf
einmal Relationen dafür sorgen sollen. Wenn ich
Hehe
Wenn der User rm -rf / zu editieren beginnt wird es brutal ;-)
Bernhard
Am 2010-06-01 20:38, schrieb hike39:
Hallo,
nachdem ich nun meine Probleme mit dem Modul Geo::Proj4 gelöst habe,
habe ich nun mit mapgen 1.05 versucht eine Karte mit den neuesten Daten
zu erstellen.
Folgende
hi.
das osm.pm modul hat probleme mit dem visible attribut. wo kommt die
datei her? in meinen dateien von der geofabrik ist das nicht drin...
wenn es nur wenige fehler sind, einfach ignorieren.
es gibt mittlerweile zu viele verschiedene xml formate. ich weiß, sax
parser und so. über kurz oder
Am 01.06.2010 20:52, schrieb Gary68:
hi.
das osm.pm modul hat probleme mit dem visible attribut. wo kommt die
datei her? in meinen dateien von der geofabrik ist das nicht drin...
wenn es nur wenige fehler sind, einfach ignorieren.
es gibt mittlerweile zu viele verschiedene xml formate.
On Tue, Jun 01, 2010 at 07:21:49PM +0200, Florian Lohoff wrote:
On Tue, Jun 01, 2010 at 04:37:25PM +0200, Sarah Hoffmann wrote:
Die Projektion sollte eigentlich die des Layers sein. Sprich, einfach
noch die Option
projection : new OpenLayers.Projection(EPSG:4326)
beim erstellen des
1 - 100 of 243 matches
Mail list logo