Thanks for your reply John.
My ip addresses are a mix of static and dhcp (assigned by my Linksys
4200 router). Yes, I have configured the manuel addresses outside the
dhcp pool, so no problems there. In fact, I m running with static ip on
my touch and vortexbox.
It happens a few times during a
The only oter difference I can point out is that when I updated the
folder on the hard drive I forgot the .xml extension. Can that be
what's causing my problem?
jarrod2750's Profile: http://forums.slimdevices.com/member.ph
I tried to install 7.7.1 on my computer and it didn't work. What is
confusing is that I can view the album art just fine, it's the opening
of the music files that are the issue. I never had this issue before.
I'm running the server via the sbt unit and have an external hard drive
hooked up.
--
Yes it's scanning with no errors. I was thinking of reformatting the
drive and starting from scratch.
jarrod2750's Profile: http://forums.slimdevices.com/member.php?userid=43132
View this thread: http://forums.slimdevices.
Triode wrote:
> SBT is the host and the dac is plugged in as a usb device to the hub.
> The shape of the plugs should prevent you plugging the wrong way round?
Many thanks. Any special cables? or bog standard USB 2.0 (with the
right style of connector)?
Also, when connecting Furutech GT40 USB
Use of a HDD without its own power supply directly to the Touch is not
recommended. From what I recall the issue was the amount of power it
might draw would cause the Touch to not function. That being said when I
1st got mine in 2010 I used a Toshiba Canvio 2.0 drive which does not
have a power ad
I've seen some reports of people successfully using the Touch with
bus-powered USB drive, but success rates are much better with USB drives
that have their own power supplies. Even with external power USB HDD
power supplies, the Touch + USB drive arrangement is not 100% reliable.
This thread has s
Hi,
I just received my Squeezebox touch today but had to find out that my
USB-HDD does not work on the system. I used a 2.5" HDD (samsung or WD)
in an external USB case without additional power supply. The disk was
fat32 formatted. The Diks never showed up on the SB an it seemed the HDD
never sto
You can add the Asus Xonar Essence One to the list of working high speed
usb dacs.
Earlier troubles I had was because I used a usb to cat5 extender, but
this one is not compatible with usb 2.0.
Now the computer placed near the dac it's working fine in all
resolutions over usb and spdif.
dsdreamer wrote:
> A strange thing happened after leaving both Touch and DAC powered on for
> the duration of my day at work. After coming home I found I could not
> play music, even though both devices were still powered on from this
> morning's experiments. I further noted that the USB hub's gr
Is the music library scan completing without any errors?
aubuti's Profile: http://forums.slimdevices.com/member.php?userid=2074
View this thread: http://forums.slimdevices.com/showthread.php?t=94808
___
JohnSwenson wrote:
> The MiniMax plus USB input will not work with the Touch. It uses the
> M2Tech USB receiver which uses it's own proprietary driver which only
> exists for windows and MacOSX. Since the Touch uses linux there is no
> driver available for this receiver on the Touch.
>
> You ca
leoduran wrote:
> My understanding is that the EDO is really intended to leverage the
> USB2.0 port on SBT for supporting "Async USB" (USB2) DAC's up-to
> 24/192K... And for that, I don't think there's need for TT3.0 (but
> perhaps I'm missing something?)
This is correct - the purpose of the app
brillo wrote:
> I wanted to see how my DAC sounded in USB mode but I can't seem to get
> the Touch to see my DAC.
>
> Triode's applet is installed. The DAC is in USB mode. I made sure the
> DAC was on before turning on the Touch.
>
> When I go to digital output settings I don't see anything
I wanted to see how my DAC sounded in USB mode but I can't seem to get
the Touch to see my DAC.
Triode's applet is installed. The DAC is in USB mode. I made sure the
DAC was on before turning on the Touch.
When I go to digital output settings I don't see anything related to
USB.
My DAC is a
I have a hard drive hooked up directly to SBT and the error comes up on
certain files not all. They were all tagged the same exact way through
Media Monkey.
jarrod2750's Profile: http://forums.slimdevices.com/member.php?us
Can you give us a little more info on your network setup? Do you have a
router in the setup? Are both the vortexbox and the Touch using static
IP? If the VB is using DHCP and the Touch is using static IP are you
sure the static IP is outside the range the DHCP server is allocating?
I have seen w
http://forums.slimdevices.com/showthread.php?94765-SB-Touch-not-working-since-upgrade-to-LMS-7-7-2-r33893
See the last Bootzilla post in this thread for instns on uninstall and
reinstall process. Are you sure LMS is pointed at your libray after you
upgraded. My library is on an external drive-K:\
Thank you. Are there any other known fixes to the "Problem" error?
jarrod2750's Profile: http://forums.slimdevices.com/member.php?userid=43132
View this thread: http://forums.slimdevices.com/showthread.php?t=94808
___
ozzymilton wrote:
> Well really, whinning ?
> It is great that someone placed the free App for the upgrade, but the OP
> was looking for opinions, at least intially.
> Is this upgrade designed only to enhance the USB ?
> If not then the OP might need the information that its not helping the
> d
praganj wrote:
> I have Buffalo II DAC, this DAC has also I2S input.
>
> How to get I2S data stream from SBT ? Any chance ? Some USB-I2S
> converter ?
> Any idea ?
The short answer is yes you can get the I2S data out of an SBT and I
have seen some sites with SBT,s connected this way. However th
Well really, whinning ?
It is great that someone placed the free App for the upgrade, but the OP
was looking for opinions, at least intially.
Is this upgrade designed only to enhance the USB ?
If not then the OP might need the information that its not helping the
digital outputs such as the coax
All previous server versions are here:
http://downloads.slimdevices.com/
Here is a link to the earlier versions
dasmueller's Profile: http://forums.slimdevices.com/member.php?userid=38035
View this thread: http://forums.sl
Hello:
I'm getting the "Problem: can't access folder" issue once I updated to
the most recent version of Software - 7.2. The files play fine either
through itunes or media monkey. I had searched and some people
suggested to roll back the software to version 7.1. I tried to figure
this out on m
Kuro wrote:
> There are actually three factors that affect the sound of a USB DAC:
>
> 1. The ground noise transmitted from the PC to the USB DAC via the
> ground connection;
> 2. The USB DAC's receiver code;
> 3. The USB host's transmitter code.
>
> The DAC's clock jitter increases if ground i
I have same problem too! How can fix it?
MK Wong's Profile: http://forums.slimdevices.com/member.php?userid=55715
View this thread: http://forums.slimdevices.com/showthread.php?t=94573
_
Triode wrote:
> I've just posted and updated version of the app. The kernel is
> unchanged, so if you install over the top of the previous install it
> will not need to download a new kernel.
>
> Changes in this version:
> - ability to turn usb dacs off and then on again without rebooting touch
Great work, Triode! I am impressed. :)
Istalled it just to test if it works in my setup. (the .2 version)
ReadyNAS Ultra4 running LMS 7.7.2 --> stock SBT wlan 7.7.2. --> BJC coax
--> Rega DAC
No problems playing 24/96 and 24/192. Just a flashing lock indicator and
a bit of noise in the speaker
leoduran wrote:
> Well, I'm also having a difficult time understanding what the root-cause
> for the "perceived" issues may be.
> At least in the case of using "Async USB", the work is being done at
> the DAC; with the SBT simply "passing" buffers to the DAC.
> So, it's a real "head scratcher" t
Hi.
I experience a really intermittent issue with my SB touch/SBS. Sometimes
my touch cant connect properly to my vortexbox, it turns out Im able
to play my music, but no cover and album information are showed in the
display. If Im trying to make a connect to vortexbox (in the library
menu)
30 matches
Mail list logo