;> cloudstack-management process is much less in size...strange to see agent
>> so big...
>>
>>
>> On 25 April 2014 19:55, Marty Sweet wrote:
>>
>>> This is interesting, what OS do you have them running on?
>>>
>>> This is the first time I have l
Hi Matthew,
I assume you haven't got a response due to the slight ambiguity of
your question.
I guess you are going to setup advance networking in Cloudstack? The
way you have planned is inline with Pod documentation.
Have you tried setting up a Cloudstack Cluster before? It might be a
bit of tria
Hi Pall,
I have CC'ed in the users mailing list as they might have more suggestions
there.
In the meantime, please can you provide the management-server.log around
the time when you run this API command. It might provide a useful insight
to the problem.
Also, how you do mean 'fails on the url'? W
you are not the intended recipient, be aware that any
> disclosure, copying, distribution or use of the e-mail or any attachment is
> prohibited. If you have received this email in error, please notify us
> immediately by replying to the sender and then delete this copy and the reply
&
Hi Vivek,
Your first message arrived fine. This sounds like ingress/egress rules
which are causing the issue - google/CSdocs should provide some good
information on this.
Can you fully install guest VMs or are you just testing with SystemVMs?
Thanks,
Marty
On 24 April 2014 08:30, Vivek Sampara
Hi Peter,
What is your 'storage.max.volume.size' in the CloudStack Global Settings?
Marty
On 25 April 2014 16:41, Peter Sadowski wrote:
> I'm having a strange issue on cloudstack 3.0.5 when trying to attach a volume
> to a VM.
> I created a new Disk offering, 2TB with sas tag. I have 1TB and
This is interesting, what OS do you have them running on?
This is the first time I have looked at this, I am running Ubuntu
12.04.4 x64 with CS4.2.0.
==
PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND
41874 root 20 0 63.8g 58g 6952 S 134 23.3 501156:53 kvm
24987 root
ge:
>
> "ssh: connect to host 169.254.0.** port 3922: No route to host"
>
>
> 2014-04-17 17:29 GMT-03:00 Marty Sweet :
>
> > Hi,
> >
> > Have you tried pinging the Console Proxy from the SSVM?
> >
> > It is possible to login to these VMs usi
Hi,
Have you tried pinging the Console Proxy from the SSVM?
It is possible to login to these VMs using the following guidance.
http://cloudstack.apache.org/docs/en-US/Apache_CloudStack/4.2.0/html/Admin_Guide/accessing-system-vms.html
Sorry about the old link, couldn't find this in the new docume
anagement-servers-after-leap-second-3062012235959-utc/
>
Hi Anoop,
Those processor loads shouldn't be causing such load averages. My
closest guess would be processes stuck in D state.
Could you provide the output of
ps aux | grep D
Thanks,
Marty Sweet
Hi,
It would be recommended that the libvirt version is the same between
hypervisors. The same probably stands for the kvm and qemu packages.
Thanks,
Marty
On 9 March 2014 12:34, Du Jun wrote:
> Hi all,
> I am using Cloudstack 4.2.0, and I have 2 hosts(include management host)
> both in advance
cloudstack-lan
>
> Thanks all for help.
>
> Now am on to explore cloudstack.
>
> Kind regards,
>
> Tommy Sosa
>
> - Original Message -
> From: "TommyBW"
> To: "Marty Sweet"
> Sent: Wednesday, March 5, 2014 5:21:30 PM
> Subject:
Hi Tommy,
Please could you send us any relevant errors from your
/var/log/cloudstack/management/... log?
This should tell us more information about your issue.
Thanks,
Marty Sweet
On 5 March 2014 15:08, TommyBW wrote:
> Hi All,
>
>
> I hope someone can help me. I have been trying
Hi,
This is possible, could you let us know what error is being returned?
A copy + paste of the cloudstack management server log will also be ideal.
Thanks,
Marty Sweet
On 4 March 2014 07:59, Deepak Sihag wrote:
> Hi Team,
>
> I am trying to boot a VM using an ISO of Ubuntu 10.04 pr
Hi,
Is the usage server running on the management node?
Thanks,
Marty Sweet
On 3 March 2014 15:02, Hollman Enciso R. wrote:
> Statistics of the instances are not showing disk data.
>
> Any idea what might be going on?}
>
> http://algolibre.com/wp-content/uploads/Screenshot-
Thanks for the configuration Amin, I'm sure it will help someone out
in the future.
Marty
On Wed, Feb 26, 2014 at 6:23 AM, Amin Samir wrote:
> Hi Marty,
>
> Thanks for your follow up attached is how working configuration file, I have
> also hardened the nginx.conf ( by commenting server_tokens
Hi Ronald,
Is there any reason you can't put this node into maintenance mode via
the infrastructure panel?
As far as I remember if there isn't anything assigned to it, it
_should_ happily work.
Marty
On Tue, Feb 25, 2014 at 6:21 PM, ronald higgins
wrote:
> Hi All,
>
> I've had a KVM host that I
Hi Amin,
Did you get this sorted? I assume navigating to
http://amin.com.au:8080/client works as expected, because of this I
doubt it's cloudstack API issue.
We could try the following:
location /client {
proxy_set_header X-Forwarded-Host $host;
proxy_set_header X-Forwarded-Serve
Hi Amin,
The error shown should have hopefully been fixed by adjusting the
proxy_pass, did you restart nginx?
Just to confirm, does navigating to https://amin.com.au/client/ load
fully but still result in a username/password incorrect (giving the
error shown above)?
Thanks,
Marty
On Tue, Feb 25,
Hi Amin,
>From first glance it seems that it could be related to your location
being '/' - although I personally haven't setup CS behind NGinx
before.
Is there any improvement if 'proxy_pass http://localhost:8080;' is
used? This should make the paths be the 'same' - although it should
all be relat
Hi,
I have just noticed the occasional following error messages in kern.log.
This is happening on all but 1 of my nodes. Is anyone else
experiencing this issue?
=
Feb 23 06:53:24 aurora kernel: [10185338.400091] top[27631]: segfault
at 0 ip 7f025eba3315 sp 7fff3f9ed308 error 4 in
libc-
The only main issue I can think of is the Java version may not be
compatible from their repo's, but that's easily fixable.
Let us know how you get on :)
Marty
On Thu, Feb 20, 2014 at 10:54 PM, Nux! wrote:
> On 20.02.2014 22:46, Andrei Mikhailovsky wrote:
>>
>> Hello guys,
>>
>>
>> I was wonderi
Hi,
We had this discussion a while back regarding the management nodes fencing
when the MySQL deamon is disconnected and session state is lost.
I believe recovery was going to be implemented in later versions of CS. If
you would like to review the conversation please see below "management
server D
Thanks Nux, I mean the problem of Memory Balloon with KVM. I am currently
running CS4.2.0 (on Ubuntu 12.04.03 - Linux 3.5.0-34-generic) without these
issues.
Marty
On Sat, Feb 8, 2014 at 5:27 PM, Nux! wrote:
> On 08.02.2014 17:02, Marty Sweet wrote:
>
>> Just wondering, in what v
Just wondering, in what version of CS was this issue introduced?
Marty
On Fri, Feb 7, 2014 at 11:02 AM, Nux! wrote:
> On 07.02.2014 10:58, Andrija Panic wrote:
>
>> Great, thx for that info, seems a little bit like cheating :) , but is
>> needed in some scenarios...
>>
>
> Well, depends. In so
having a lot
> of issues. I can't install FreeBSD 10 64bit only FreeBSD 9.2 i386.
>
> can't allocate more than 3GB of RAM on guest instances, running 64bit
> Centos on guest.
>
> any recommendations?
>
>
> On Wed, Feb 5, 2014 at 1:24 PM, Marty Sweet wrote:
>
0164 0 4553
> -/+ buffers/cache: 3052722
> Swap: 7999 1692 6307
>
> [root@hdp1 ~]# uname -a
> Linux hdp1.fqdn.com 2.6.32-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 21:39:27
> UTC
> 2014 x86_64 x86_64 x86_64 GNU/Linux
>
>
Also, it might be worth confirming the VM is 64bit.
# uname -a
Marty
On Wed, Feb 5, 2014 at 7:44 PM, Marty Sweet wrote:
> Hi,
>
> Can you run the following command on the hypervisor where the VM resides:
>
> # virsh dumpxml i-X-XX
>
> Where i-X-XX is the internal
Hi,
Can you run the following command on the hypervisor where the VM resides:
# virsh dumpxml i-X-XX
Where i-X-XX is the internal system name of the VM.
Marty
On Wed, Feb 5, 2014 at 6:55 PM, motty cruz wrote:
> Hello All,
> I created a System Offering with 2 Core CPU and 8GB or RAM.
>
> whe
Hi Zack,
Thanks for using Cloudstack! I assume you are adding the host on the
management webUI when you are encountering this error?
The most probable cause is your DNS records are pointing the name of the
management server, say "man1" -> 10.1.1.2.
I manually override this in my setups to use a d
eboot the VMs.
>
>
> On Thu, Jan 30, 2014 at 1:50 PM, Marty Sweet wrote:
>
> > Hi,
> >
> > If you are using KVM please see this previous mailing list thread:
> > Bandwidth Shaping - Ubuntu 12.04.3 KVM:
> >
> >
> http://mail-archives.apache.org/mod_
Hi,
If you are using KVM please see this previous mailing list thread:
Bandwidth Shaping - Ubuntu 12.04.3 KVM:
http://mail-archives.apache.org/mod_mbox/cloudstack-users/201310.mbox/thread?5
Have you also rebooted your VM Guests?
Marty
On Thu, Jan 30, 2014 at 3:10 PM, motty cruz wrote:
> hell
I should also point out that this is on CS 4.2.0.
This issue may have been fixed since then.
Marty
On Thu, Jan 30, 2014 at 7:41 AM, Marty Sweet wrote:
> What hypervisor are you using?
>
> My CS System Capacity on the dashboard shows *Memory 157.05 GB / 1.37 TB
> *(w
What hypervisor are you using?
My CS System Capacity on the dashboard shows *Memory 157.05 GB / 1.37
TB *(which
works + overprovisioning).
I think this issue is slightly different to CLOUDSTACK-3048 as it should
not effect VM allocation.
I have never noticed about the memory used section:
Memory
quot;try to reconnect for 60seconds".
> Would be cool if you can paste your solution here!
>
>
> Thx
>
> -Ursprüngliche Nachricht-
> Von: Marty Sweet [mailto:msweet@gmail.com]
> Gesendet: Dienstag, 21. Januar 2014 15:54
> An: users@cloudstack.apache.org
> Bet
Hi,
I have this problem with my failover setup, I think however it's by design
to ensure data consistency and is more that the MySQL connections have
disappeared instead of it timing out.
I ended up creating a cron watchdog to start CS Management incase
it stopped, I'm sure there are more elegant
Specify
> VLANNoSpecify IP rangesNoConserve modeYesNetwork Rate (Mb/s)2
> Mb/sTraffic
> TypeGuest
>
> So, I feel confused about how Cloudstack limit the network rate for guest
> VMs.
>
> --
> Best regards,
> DuJun
>
>
> 2013/12/25 Marty Sweet >
>
I assume you are stopping and relaunching the VM.
I would second Nux and say Network Offering.
Marty
On Wed, Dec 25, 2013 at 11:49 AM, Nux! wrote:
> On 25.12.2013 11:40, Du Jun wrote:
>
>> Hi Marty,
>> My problem is that even though I have update global settings about network
>> rate, but inb
vm.network.throttling.rate
> >
> > Andrei
> >
> >
> >
> > - Original Message -
> >
> > From: "Marty Sweet"
> > To: users@cloudstack.apache.org
> > Sent: Tuesday, 24 December, 2013 6:38:52 PM
> > Subject: Re: cloudstack
Hi,
Google "Bandwidth Shaping Ubuntu 12.04.3 KVM" and try find the last few
message.
Marty
On Tuesday, December 24, 2013, Andrija Panic wrote:
> I think I also saw this on the global settings or zone/cluster settings,
> something global...
>
>
> On 24 December 2013 16:58, Nux! > wrote:
>
> > On
Hi,
What type of guests are you experiencing this with?
There should be a mail archive (on mailmark?) where I raise and resolve the
issue.
Unfortunately I can't find it ATM, but will send you a link later on if I
get a chance.
Good luck!
Marty
On Tuesday, December 24, 2013, Du Jun wrote:
> Hi
t; Andrei
>
> - Original Message -----
>
> From: "Marty Sweet" >
> To: users@cloudstack.apache.org
> Sent: Saturday, 21 December, 2013 2:12:24 PM
> Subject: Re: KVM - Adding volume to Ubuntu Server is not shown
>
> Hi Andrei,
>
> This can be resolved by forcing a
Normally (at least with KVM):
- The base disk (OS) will be IDE
- All extra disks will be VirtIO
- Networking depends on the 'OS Type' (not sure where this is defined at
the backend)
- To use VirtIO Networking, select the OS Type of 'Other PV (xx-bit)'
As far as I'm aware uploading templates will c
Hi Andrei,
This can be resolved by forcing a rescan to the relevant SCSI host, these
instructions should work:
http://www.debuntu.org/how-to-rescan-a-scsi-bus-without-rebooting/
Marty
On Sat, Dec 21, 2013 at 12:49 PM, Andrei Mikhailovsky wrote:
> Hi guys,
>
> Was wondering if there is a workar
Depending on the hypervisor (for example this would work with KVM), you
could still tag management traffic down to each host, just manually setting
up a network interface (ex. privatebr0) and set the 'KVM Traffic label'
accordingly.
Not sure how effective this would be with other hypervisors.
Exam
Agreed with Chiradeep, it may also be worth checking dmesg and checking the
virtual volumes with the tools provided by qemu.
Marty
On Wed, Dec 11, 2013 at 6:27 PM, Chiradeep Vittal <
chiradeep.vit...@citrix.com> wrote:
> Best to ask on the libvirt / KVM lists. I googled 'qemu: terminating on
>
Hi Kano,
You can normally find more information in the management server log, which
is located under /var/log/cloudstack .
Can you let us know why you think it is hanging? Does the console freeze or
is networking disrupted?
Does this issue seem to occur on other VMs running on your KVM hosts?
Tha
I occasionally have this issue, haven't for a while though - only effects
Windows VMs.
Seems to affect Windows 2008 R2.
Running KVM, Ubuntu 12.04, Bonding, Bridges, VLANS.
Marty
On Tue, Nov 26, 2013 at 5:51 PM, Kirk Jantzer wrote:
> Interesting. That setting is not set on any of the instances.
of those things that could be set easily
> > now (still setting up) that I might appreciate later.
> >
> > Based on both your responses, I think I'll just leave it well alone!
> > Need to get to grips with pacemaker/corosync anyway for other reasons
> > s
What guide are you following?
On Tue, Nov 5, 2013 at 5:26 PM, Mario Giammarco wrote:
> Marty Sweet writes:
>
> >
> > What have you configured VLAN 200 and 300 for in Cloudstack?
> >
> Because official documentation says to do it.
> Anyway I tried also without creating them and it does not work...
>
>
>
Others may have had more success with this but from experience of MySQL in
multi-master setups I would avoid this entirely.
A common setup is using DRDB to provide a master/slave:
Management 1 (MySQL Master) w/ virtual IP
Management 2 (MySQL Slave)
HA IP Address (for agents/services requiring DB
What have you configured VLAN 200 and 300 for in Cloudstack?
Marty
On Tue, Nov 5, 2013 at 12:26 PM, Mario Giammarco wrote:
> Marty Sweet writes:
>
> >
> > Hi Mario,
> >
> > Are you tagging VLANS to this host?
> > If so, is the switch connected to
,
Marty
On Tue, Nov 5, 2013 at 7:00 AM, Mario Giammarco wrote:
> Marty Sweet writes:
>
> >
> > Ok, is that IP a gateway? It would need to be able to route traffic.
> > If you haven't specified VLANS then VLANS will not be used (as far as I'm
> > aware), and
Giammarco wrote:
> Marty Sweet writes:
>
> >
> > Hi Mario,
> >
> > What is the IP address of the machine you are using to access your VMs?
> > Does the gateway of 10.1.1.1 exist as a physical device?
> >
>
> Until two minutes ago I had no physical devic
Hi Mario,
What is the IP address of the machine you are using to access your VMs?
Does the gateway of 10.1.1.1 exist as a physical device?
Marty
On Mon, Nov 4, 2013 at 7:57 PM, Mario Giammarco wrote:
> Mario Giammarco writes:
>
>
> >
> > I choose "basic networking" type.
> > I have a network
is there a way to clean it up?
> unfortunately it was my mistake to try to migrate the disk to another
> primary storage in progress when i deleted, .
>
> Thanks,
>
>
> On Fri, Nov 1, 2013 at 9:17 AM, Marty Sweet wrote:
>
> > Did you try and migrate the disk to another
Did you try and migrate the disk to another Primary Storage before
attempting to delete it?
On Fri, Nov 1, 2013 at 3:38 PM, motty cruz wrote:
> yes, I meant to mentioned that I had change those settings in Global
> Settings already,
>
>
> expunge.delay =150
> expunge.interval = 160
>
> Thanks,
I had this issue with 4.1.1, upgrading to 4.2.0 fixed it.
You might be able to create the usage databases manually by looking at the
schema update files (if you are confident doing so).
Marty
On Wed, Oct 30, 2013 at 1:13 PM, Dean Kamali wrote:
> Yes it is running
>
> /etc/init.d/cloudstack-us
Thanks :)
On Wed, Oct 30, 2013 at 12:08 AM, Nux! wrote:
> On 29.10.2013 22:51, Marty Sweet wrote:
>
>> It appears my setup is using e1000 for networking instead of virtIO (shown
>> via virsh dumpxml), how is this set through Cloudstack on KVM?
>>
>> e1000 drivers
It appears my setup is using e1000 for networking instead of virtIO (shown
via virsh dumpxml), how is this set through Cloudstack on KVM?
e1000 drivers can be found on Intels website using Google.
Marty
On Tuesday, October 29, 2013, Nux! wrote:
> On 29.10.2013 13:49, motty cruz wrote:
>
>> Hi a
else who has noticed these anomalies,
Marty
On Tue, Oct 29, 2013 at 3:19 PM, Marty Sweet wrote:
> Yeah it's odd, can anyone do the following test (on Linux machines) - who
> have bandwidth limiting enabled:
>
> Test 1 (VM Outbound):
> Physical: iperf -s
> Virtual: iper
t remember sorry!)
> >> it
> >> gave:
> >>
> >>
> >>
> >>
> >> But it gave a bandwidth of 1.32Mbit/s
> >>
> >>
> >> This is a tad odd, surely a higher value should result in more bandwidth
being allowed through?
Thanks,
Marty
On Mon, Oct 28, 2013 at 11:56 AM, Nux! wrote:
> On 28.10.2013 11:18, Marty Sweet wrote:
>
>> Hi Guys,
>>
>> Following my upgrade from 4.1.1 -> 4.2.0, I have noticed that VM traffic
>> is
>> now limited to 2Mbits.
>>
Hi Guys,
Following my upgrade from 4.1.1 -> 4.2.0, I have noticed that VM traffic is
now limited to 2Mbits.
My compute offerings were already 1000 for network limit and I have created
new offerings to ensure this wasn't the issue (this fixed it for someone in
the mailing list).
Is there anything
Hi,
There should be some errors above the ones you have included. They should
give a better idea on why the zone is not ready, possibly due to the lack
of a system template.
Marty
On Sun, Oct 27, 2013 at 4:59 PM, Sanjay Tripathi wrote:
> Can you check if the agents are also up for the system
Hi,
Technically a subnet is a network, in terms of how CS implements it with a
Gateway and CIDR.
Adding more subnets to extend your /29 (within the same CS network)
wouldn't make logical sense as your default gateway would have to be
different for each subnet, otherwise the subnet given to each VM
Hi Guys,
I have just upgraded to 4.2.0 from 4.1.1 and am having some issues with the
SystemVMs.
I understand that we are meant to upgrade to the new system image? Using
the script in the 'Prepare systemvm' documentation I did this with no
avail, editing the database to suit what I think would work
se note
> that I have not created any vlan's or bridges on host or switch or
> management server.
> So is there anything I should do on switch (Dell 6248) and should I
> create any vlan's on host (which I already mentioned in my previous post)?
>
> Thank you.
>
> Regard
Hi Motty,
Looking in your management-server.log will yield more information.
This is most probably because your Agents do not have 2 cores at 4Ghz, but
the log will show the exact issue.
Marty
On Wed, Oct 23, 2013 at 8:46 PM, motty cruz wrote:
> Hello, I created a Custom Compute Offering 2 co
What base OS are you using? Can you run # brctl show?
Marty
On Wed, Oct 23, 2013 at 7:36 AM, Bjoern Teipel <
bjoern.tei...@internetbrands.com> wrote:
> Is somebody using cloustack >= 4.1 and openvswitch ?
>
> I configured everything according the cloudstack wiki and openswitch seems
> to work f
less than 15 days...so lot of stuff was done in kind of
> rush, but got 99% of networkng understood then. Now, 9 months later, I got
> that 1% I missed :)
>
> Thanks
>
>
> On 22 October 2013 21:04, Marty Sweet wrote:
>
> > Hi Andrija,
> >
> > Your setup se
Hi Vairavan,
The main highlight here is that you are using 20.xxx.xxx.xxx as your
private network, this is not compliant with RFC1918 and would cause
connectivity issues to public address in this subnet.
Do you own a range of public IP address you wish to allocate to VMs? If so,
this will effect
Hi Andrija,
Your setup seems fine to me, I am not sure why you would want to get rid of
VLANs as it provides the flexibility you require when it comes to isolated
public/private networking all on the same infrastructure.
I run a shared network for our 'Public' addresses, on a set VLAN and also
hav
Ah, I am referring to Volume Snapshot!
Marty
On Sun, Oct 13, 2013 at 2:14 PM, Indra Pramana wrote:
> Hi Marty,
>
> Are you referring to VM snapshot or volume snapshot?
>
> Thank you.
> On 13 Oct 2013 05:19, "Marty Sweet" wrote:
>
> > This is odd, ru
This is odd, running on 4.0.2 (I think), (I had) KVM snapshotting not work.
After upgrading to 4.1.1 it has since worked, although automated snapshots
does not work.
If you are saying they are not working in 4.2 then something very funky is
happening.
Marty
On Saturday, October 12, 2013, Dean Ka
roblem.
>
>
> On 9 October 2013 10:44, Marty Sweet wrote:
>
> > Hi!
> >
> > Have you tried to reboot the Console Proxy? If that doesn't work try
> > destroying it and remaking it.
> >
> > Marty
> >
> > On Wednesday, October 9, 2013, Cloudwizz
Hi!
Have you tried to reboot the Console Proxy? If that doesn't work try
destroying it and remaking it.
Marty
On Wednesday, October 9, 2013, Cloudwizz wrote:
> Yes, but it is expiring the session immediately after I login and view
> console, so all in under a minute of logging in.
>
>
> > On 9
Hi Karan,
Try assigning a static address to the interface then bring it up using
ifup. This should in theory not close down the IP address once link has
been lost.
Hope this helps,
Marty
On Sun, Sep 29, 2013 at 7:41 PM, Karan . wrote:
> Hi
>
> I'll be giving a short demo on CLOUDSTACK in my o
UI tries to connect to some "realhostip.com" and got
> timeout, of course. I have seeing somewhere in documentation that for
> external access Proxy must be configured correctly.
> Will look into documentation once again.
>
> Vadim.
>
>
> -Original Messag
Hi Vadim,
It's probably best to try and wget the URL from the Secondary Storage VM,
this will be where it is failing.
Also check that the Secoundary Storage is mounted on that VM.
There is documentation which shows the steps on how to connect to the SSVM
depending on your hypervisor in the main d
This is mostly confusing that the packets are not seen on the VR public
interface, seeing as other services are working.
If it was a local NAT issue then the packet would atleast get into that
interface. Do you have any upstream devices providing NAT? Or any other VR
with the issue?
It may be wort
Hi Noel,
Can you answer: Does the traffic come back on the public interface? and
then onto the Guest interface?
Thanks,
Marty
On Sun, Sep 15, 2013 at 2:05 PM, Noel Kendall wrote:
> Indeed, yes, a wget executed on the VR to a public website works just fine.
> Noel
>
> > Date: Sun, 15 Sep 2013 1
Hi Noel,
Does the traffic come back on the public interface? and then onto the Guest
interface?
Does a wget on the VR work?
Marty
On Sat, Sep 14, 2013 at 8:19 PM, Noel Kendall wrote:
> I have that Marty. I see the http outbound request coming in on the guest
> interface of the VR,and see the
Hi Noel,
Can you run a tcpdump on both VR interfaces, this should make it apparent
what is happening?
Thanks,
Marty
On Sat, Sep 14, 2013 at 6:41 PM, Noel Kendall wrote:
> http://pastebin.com/3FZmFnvZ
> Many thanks Marty.
> Noel
> > Date: Sat, 14 Sep 2013 18:07:55 +0100
> > Subject: Re: Advance
Hi Noel,
Could you put the IP tables on pastebin? GMail has collapsed the lines
horrifically.
Have you also tried a tcpdump on both interfaces on the VR?
tcpdump -i eth0 <--- Or whatever it may be called
I would expect worse connectivity if it was a pure NAT issue, but I will
review the tables la
Hi Noel,
Can you try using telnet to connect to an external webserver? telnet
www.google.com 80
Can you also clarify: do you see the response packets reach the VR and/or
on what interfaces?
Thanks,
Marty
On Saturday, September 14, 2013, Noel Kendall wrote:
> Guest OS cannot receive responses to
Hi Michael,
I also have very temperamental results with the Console Proxy sometimes,
what version of Cloudstack are you using?
Thanks,
Marty
On Sun, Sep 8, 2013 at 4:44 PM, Michael Phillips wrote:
> Has anyone else experienced the console access to a vm being unavailable?
> Combination of thin
Hi,
I couldn't find any screenshots in the string of messages.
Looking at the logs it almost seems as like the VPC is stopping
unexpectedly.
Looking at my VPC, the first interface is a Link Local for Control type
traffic, which is running on KVM.
I will CC this into the dev mailinglist in search
comment-13756254
> >>
> >> they said there it could be a problem with vhd-util that was not sent to
> >> the hypervisor, but I do not know where I should put it on a xen server
> >> that is also using the XCP TOOLSTACK.
> >>
> >>
> >> 2
Hi,
It looks like your issue is with the local storage, as opposed to resources.
Personally, I don't know exactly what 'can not find local sr' means but I'm
sure someone can chip in.
In the meantime, I would check what you have defined as primary storage on
cloudstack and that it is functioning
Hi Karthikeyan,
I've had this issue before when I changed an encrypted value in the
database and cloudstack-management wasn't able to open the database.
Please could you provide your management log? Your best bet is to restore a
backup (which hopefully you took before editing the database) and wor
Hi Indra,
Due to the lack of response I assume not, personally if I had this issue, I
would familiarise myself with the database and do some manual edits (after
a backup of course!).
Marty
On Sat, Aug 31, 2013 at 7:09 PM, Indra Pramana wrote:
> Dear all,
>
> Anyone had changed their public I
Hi guys,
Great idea! Has anything been added to the docs regarding this?
Marty
On Sat, Aug 31, 2013 at 7:44 AM, Rajesh Battala
wrote:
> If possible, push them to SuseStudo It's a nice appliance building site.
>
>
> -Original Message-
> From: Musayev, Ilya [mailto:imusa...@webmd.net]
>
Only if they are not prompted for a password.
On Saturday, August 31, 2013, Chirag Choudhary wrote:
> Won't a user added in sudoers work ?
>
> Thanks
> On 30 Aug 2013 20:39, "Marty Sweet" >
> wrote:
>
> > Hi Chirag,
> >
> > What username
Hi Lisa,
/var/log/cloud was the old logging location before v4 (I think!), logs are
now at /var/log/cloudstack/management/
management-server.log is the most useful I find, if there isn't anything
immediate there attach it and I will take a look for you.
Marty
On Fri, Aug 30, 2013 at 7:45 AM, L
Hi Chirag,
What username are you using when you add the host in the cloudstack
interface?
This should be 'root', as explained on line 114 of your pastebin.
Marty
On Fri, Aug 30, 2013 at 12:42 PM, Chirag Choudhary
wrote:
> Hello,
> I am having this problem that after installing cloudstack
I am also interested in this, using snapshots as a 'last resort backup' or
a simple fallback is something that I think people would find very useful,
without having to remake VM instances.
Marty
On Fri, Aug 30, 2013 at 11:02 AM, Gaspare A Silvestri <
g.silves...@netsons.com> wrote:
> Hello ever
Hi Ron,
I would be interested in having a meeting if we can get a couple of people
involved and amending documentation where we see fit.
I have setup KVM clusters successfully but do feel that the documentation
doesn't always give the correct outcome. This could be due to the merge of
Ubuntu and C
surprising as Cloudstack has some very random log
directories, for example /var/log/cloudstack-management is made, but I have
never seen anything in it.
Let me know how you get on,
Marty
On Fri, Aug 30, 2013 at 12:19 AM, Marty Sweet wrote:
> Hi Dean,
>
> I will be able to check for
, do
> you see any log files created in /var/log/cloudstack/usage
>
> Thanks
>
>
> On Thu, Aug 29, 2013 at 6:51 PM, Marty Sweet
> >
> wrote:
>
> > Can you see if there are any errors in your management logs?
> > I remember seeing usage errors in our
1 - 100 of 123 matches
Mail list logo
