Re: [wsjt-devel] [OT] Hamlib string for IC7300

There's no difference -- just when WSJTX compiles it adds it's own prefix to rigctld. Mike W9MDB On Saturday, July 6, 2024 at 08:54:30 PM CDT, Marco Calistri wrote: Hi Mike! So far I always used hamlib rigctld. Could you be so kind to explain what differs the two and whic

Re: [wsjt-devel] Adjustable frequency shift for split operation?

This is indicating an audio level drop. At 1999 Hz can you increase audio level for the same alc level as 1500, to verify you get the same power as expected ? In Data-U FT8 100% modulation should occur at slight indication of alc, however above should confirm that the audio level is changing,

Re: [wsjt-devel] [OT] Hamlib string for IC7300

Hi Mike! So far I always used hamlib rigctld. Could you be so kind to explain what differs the two and which is advisable to use? Many thanks! Marco, PY1ZRJ Inviato da Outlook per Android Da: Black Michael via wsjt-devel Inviato: Saba

[wsjt-devel] Fwd: Adjustable frequency shift for split operation?

I do not have a FT-991a, however I use other Yaesu's incl a FTDX-101MP and FT-897d etc. On all these and others I set alc for a slight lift off rest point ~2%, with audio feed level (wsjtx TX pwr) and sound  level set, at desired drive power at ext power meter. I use rig split and find the m

Re: [wsjt-devel] Adjustable frequency shift for split operation?

I do not have a FT-991a, however I use other Yaesu's incl a FTDX-101MP and FT-897d etc. On all these and others I set alc for a slight lift off rest point ~2%, with audio feed level (wsjtx TX pwr) and sound  level set, at desired drive power at ext power meter. I use rig split and find the m

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Richard, is that in SSB mode or something else? Is that "ALC" actually ALC feedback that is reducing the gain of the PA, or is it just a sort of power meter? If you are in SSB mode with no audio filtering, you should see a flat response well above 2.5 kHz. I'm assuming you have all processing di

Re: [wsjt-devel] Adjustable frequency shift for split operation?

On Sat, Jul 6, 2024 at 7:49 PM Adrian wrote: > Richard, Can you tell us the alc meter indication on each of these 1500 > -1999 power levels that you describe ? > > The alc indication, may provide clues as to whether audio(modulation) > level is a factor ? > That doesn't appear to be the case. at

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Richard, Can you tell us the alc meter indication on each of these 1500 -1999 power levels that you describe ? The alc indication, may provide clues as to whether audio(modulation) level is a factor ? 73 vk4tux On 7/7/24 03:50, Richard Shaw via wsjt-devel wrote: On Sat, Jul 6, 2024 at 12:

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Just regarding my last post 1 is clearly a typo and should read 1999. Thankyou 73 vk4tux On 7/7/24 03:32, Reino Talarmo via wsjt-devel wrote: >This does make me wonder though, why only jump in 0.5KHz increments? Not that the logic is difficult but wouldn't it be simpler to just allow

Re: [wsjt-devel] Adjustable frequency shift for split operation?

I think Richard does understand that, and is asking for a tighter audio frequency control window to maintain his tested & expected power output. The weird thing here is how he sees such differrence over a 500Hz audio range. I would be connecting a calibrated constant level audio generator fee

Re: [wsjt-devel] [OT] Hamlib string for IC7300

Show me your WSJT-X settings for the IC-7300. Mike W9MDB On Saturday, July 6, 2024 at 12:54:24 PM CDT, wsjtx-...@iz0kba.it wrote: Hi Mike, I'm using version 4.5.5 and I don't have any rigctld-wsjtx available. I configure the rigctld daemon for the TS2000 and it works very well set

Re: [wsjt-devel] Adjustable frequency shift for split operation?

It's important to remind ourselves now and then of the benefits of the work of the dev team on fake-it or real split in preventing the awful signals that used to be common. All of those horrors with 2,3,4 and even 5 in-band copies of the harmonics of signals at low audio base tones, created by

Re: [wsjt-devel] No audio output to FT-710 with Raspberry pi

Hi Mike, Thanks for the suggestion. I tried it, but I still get errors at 48000 on my RPi 5. On my amd64 platform, the 48000 rate gives me 100's of flags on pskreporter. If I change the output rate to 44100 in soundoutput, I get zip. Is there an assumption of a 48k sample rate for the output? If

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Richard, Please email me the settings you have made for the various menu items on your FT-991A. I have an FT-991 (without the "A"), and I don't have such problems with the bandwidth. I therefore suspect that either something is wrong with your rig or with your settings. 73 de Uwe, DG2YCB __

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Some rigs have 100Hz resolution for example. 500Hz is guaranteed to work on pretty much all rigs. Mike W9MDB ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] [OT] Hamlib string for IC7300

Hi Mike, I'm using version 4.5.5 and I don't have any rigctld-wsjtx available. I configure the rigctld daemon for the TS2000 and it works very well setting NET rigctl from WSJTX. The problem I have is when I have to set up the IC7300, I can't understand how to compose the rigctld configuration s

Re: [wsjt-devel] Adjustable frequency shift for split operation?

On Sat, Jul 6, 2024 at 12:36 PM Reino Talarmo via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > >This does make me wonder though, why only jump in 0.5KHz increments? Not > that the logic is difficult but wouldn't it be simpler to just allow a > "sweet spot" setting and use that to offset

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Thanks, Mike, I wasn't trying to report a bug as much as point out something I had observed. This was under Fedora 39, wjjt-x 2.6.1, flrig 2.0.05 for rig control. I'll do some more analysis to reproduce it reliably and report the results separately - I don't want to hijack Richards original thread

Re: [wsjt-devel] Adjustable frequency shift for split operation?

>This does make me wonder though, why only jump in 0.5KHz increments? Not that >the logic is difficult but wouldn't it be simpler to just allow a "sweet spot" >setting and use that to offset the TX frequency? Richard, you may have not fully understood the Split operation. Your actual RF tra

Re: [wsjt-devel] Adjustable frequency shift for split operation?

On Sat, Jul 6, 2024 at 9:16 AM Michael Pittaro via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Richard, > Also check the mode the TX VFO is using to make sure it's actually DATA. > My FT-891 is a similar radio and more than once when running true split, > VFO B / TX has been in SSB mod

Re: [wsjt-devel] [OT] Hamlib string for IC7300

Are you using rigctld-wsjtx ?  Are you running WSJT-X already?  You need to shut down WSJT-X, start rigctld-wsjtx, then select Hamlib NET rigctl in WSJT-X. Mike W9MDB On Saturday, July 6, 2024 at 11:11:39 AM CDT, wsjtx-dev--- via wsjt-devel wrote: Hi everyone, I successfully use

[wsjt-devel] [OT] Hamlib string for IC7300

Hi everyone, I successfully use an IC7300 with WSJTX. I would like to connect the radio via rigctld, but I can't connect, my string is: rigctld -m 3073 -r /dev/ttyUSB0 -s 19200 - Where am I wrong? The IC7300 works perfectly when connected directly via WSJTX, I was able to use a TS2000 perfec

Re: [wsjt-devel] Adjustable frequency shift for split operation?

What version of WSJT-X are you running? I see the FT-891 mode is not targetable to VFOB -- so we have to swap vfos, set mode, and swap back. If using the standard WSJT-X please send a debug log where VFOB is different than VFOA and you start a transmit which "should" change the VFOB mode. Plea

Re: [wsjt-devel] No audio output to FT-710 with Raspberry pi

Sending sound is only 50% of the sound I/O -- it's the sound reading that is being done most the time. You can minimize hamlib overhead with this data in hamlib_settings.json which would go in the same directory as WSJT-X.ini {         "config": {                 "multicast_data_addr": "0.0.0.0

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Richard, Also check the mode the TX VFO is using to make sure it's actually DATA. My FT-891 is a similar radio and more than once when running true split, VFO B / TX has been in SSB mode while VFO A / RX was in DATA mode. If the problem goes away running with split set to None as Reino suggested, t

Re: [wsjt-devel] No audio output to FT-710 with Raspberry pi

I changed the sample rate in Audio/soundout.cpp from 48000 to 44100. There are no errors logged and the oscilloscope shows data during transmit.  It looks like the RPi can't handle the higher rate. I'm still running to a dummy load, so I don't know yet if I'm getting out. What is interesting is

Re: [wsjt-devel] Adjustable frequency shift for split operation?

With a narrow waterfall the cutoff is sudden -- not gradual. Mike W9MDB On Saturday, July 6, 2024 at 08:13:07 AM CDT, Sam W2JDB via wsjt-devel wrote: Silly question, but what are the waterfall bandpass limits? 73, Sam W2JDB On Saturday, July 6, 2024 at 07:55:13 AM EDT, Richar

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Silly question, but what are the waterfall bandpass limits? 73, Sam W2JDB On Saturday, July 6, 2024 at 07:55:13 AM EDT, Richard Shaw via wsjt-devel wrote: On Fri, Jul 5, 2024 at 10:16 PM Black Michael wrote: And does the power go back up when you go above 1900? Sounds like it mi

Re: [wsjt-devel] Adjustable frequency shift for split operation?

Richard, You may check your transmitter passband by selecting None in the Split Operation. Then your transmit frequency is not jumped at 1500 and 2000 Hz boundaries. 73, Reino OH3mA From: Richard Shaw via wsjt-devel Sent: Saturday, July 6, 2024 2:49 PM To: Black Michael Cc: Richard S

Re: [wsjt-devel] Adjustable frequency shift for split operation?

On Fri, Jul 5, 2024 at 10:16 PM Black Michael wrote: > And does the power go back up when you go above 1900? > > Sounds like it might be a notch filter. > Doesn't seem to be the problem. The highest I can get is 1999Hz before the frequency changes but it's still <5W. I checked the data options