Re: [wsjt-devel] AGC affecting SuperFox decoding #FH

peeds of AGC. They all work in almost all cases (for me). RF gain is almost always full tilt. Signals were from +18 to -15/-16. 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] CY9C

it works. :-( Sorry for off topic for this list. 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] CY9C

nd comes up. 73 and GL to all. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] CY9C

because I am currently very antenna limited. 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] SuperFox vs Fox

> On Aug 24, 2024, at 15:12, Gary via wsjt-devel > wrote: > > The reduced overall sensitivity compared to 3 stream regular F/H was at play > in my case. On 3 streams, they decoded on regular F/H at -17. Think about what you’re saying. On SF mode, he is running 100% of

Re: [wsjt-devel] SuperFox vs Fox

pond to two or three of them. When things went right, they were responding to up to 8 callers at a time, plus a CQ or verified message. 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] SuperFox vs Fox

power.  Like 40-100w at least.  I heard that N5J was only running 10w.  That could have been a big part of the problem, if true. 73 de Gary - W9BS On 8/24/2024 4:50 PM, Jim Shorney via wsjt-devel wrote: It is a matter of deciBels as has been documented. Each time a stream is added in multi-stream

Re: [wsjt-devel] SuperFox vs Fox

ed to regular fox near the end of their deployment that I was able to finally work them on 17 and 30.  They were running 3 streams at the time.  Never decoded them once on Superfox on any band, after frustratingly listening for them all week. 73 de Gary - W9BS On 8/24/2024 11:51 AM, Jim Shorne

Re: [wsjt-devel] Comment on Superfox/hound release rc6

ing with the ability to increase the number of completed Qs. By the way, my receiver showed a record number of FT8 callers one day with 4.8KHz of callers from the lower audio spectrum to 4.8K on my 890, all in the same sequences. The spectrum was full, and the software decoded it

Re: [wsjt-devel] Superfox CQ with grid #FH

bad feed line and poor weather. Still waiting for 10/15/20m. By the way, if you put the grid in on your software, it should be fine. Use the same grid for each contact. AI99xo. Put it in your JARVIS configuration (you don’t have one???) and it will be there all the time when you

Re: [wsjt-devel] SuperFox Testing - Timor-Leste/4W

> On Aug 3, 2024, at 10:27, Charles Suckling via wsjt-devel > wrote: > > Charlie DL3WDG Thanks, Charlie. I thought I read it somewhere. Gary ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourcefor

Re: [wsjt-devel] SuperFox Testing - Timor-Leste/4W

but I think NCDX may be a good one and I hope Joe doesn’t get overrun by requests. Contact him and see. 73, and GL Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Am I doing something wrong?

ts (clicking on a call to call them) if he can’t see them. A screen shot of WSJT-X might help. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] ALL.TXT RX freq is not RX DIAL freq

> On Jul 30, 2024, at 15:11, k0vm via wsjt-devel > wrote: > > If you put your dial on their tx frequency, you'll never decode them. > They'll be below your rx passband. > AL, K0VM Is that supposed to argue with my comment (which is what y

Re: [wsjt-devel] ALL.TXT RX freq is not RX DIAL freq

arrier frequency of their transmitted signal are very confusing and leave you trying to guess where to find them. 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Mac

Also you might want to upgrade your MacOS to Sonoma 14. As you can see from the responses here, many of us are using Sonoma. Sent from my iPhoneOn Jul 27, 2024, at 5:55 AM, Gary Rogers wrote:Dan, you could try WSJT-X Improved which has packages compiled for the Mac M1 chip:wsjt-x_improved

Re: [wsjt-devel] Mac

Dan, you could try WSJT-X Improved which has packages compiled for the Mac M1 chip:wsjt-x_improved - Browse /WSJT-X_v2.7.1/macOS at SourceForge.netsourceforge.netJust download your preferred layout, open the zip file and drag the app to your Applications folder. Click to open. Sent from my iPhoneOn

Re: [wsjt-devel] MAC

> > > >> On Jul 26, 2024, at 4:12 PM, V. Scott Moore via wsjt-devel >> wrote: >> >> Yes. Studio M1 OS 14. >> Scott >> Sent from my iPhone >> >>>> On Jul 26, 2024, at 4:03 PM, Gary Rogers via wsjt-devel >>>> wrot

Re: [wsjt-devel] MAC

What problem are you having? Sent from my iPhone > On Jul 26, 2024, at 3:49 PM, Dan Merrifield via wsjt-devel > wrote: > > Has anyone been able to get 2.7.0 RC6 working on a MAC with Apple ARM based > CPU ? > > ___ > wsjt-devel mailing list > wsjt

Re: [wsjt-devel] SF rc6 TX signal "fuzz"

decode all the way around the horn. 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Signal reports for -rc6

> On Jul 19, 2024, at 20:53, Hasan N0AN via wsjt-devel > wrote: > > New veision is doing well. +6 is as strong as I have seen any signal from K8R > and it decoded it no problem. Pretty sure I have had good decodes up around +15 or mor

Re: [wsjt-devel] Call for SuperFox files

me I’ve run into the problem, other than occasional random sequences. They’ve been pretty reliable here, when I find them. I also have a theory of what the cause is, based on some repeated testing during this “failing period”. Gary - AG0N ___ wsjt-dev

Re: [wsjt-devel] crash on Apple MAC with M1 Processor

In MacOS, the unix executable is in /Applications/wsjtx.app/Contents/MacOS/sfrx > On Jul 15, 2024, at 9:37 AM, Kari Sillanmäki via wsjt-devel > wrote: > > Hi all, > > Here is a workaround that prevents the error from ending WSJT-X: > > Copy program "sfrx" to ".sfrx" in the same same director

Re: [wsjt-devel] Verified message not always present v2.7.0-rc5

by the DX station during the wide responses and simultaneous QRM. Is there any information available on that? 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] MacOS - error in SuperFox mode

Not sure if this is helpful but I am using https://sourceforge.net/projects/wsjt-x-improved/files/WSJT-X_v2.7.1/macOS/wsjtx-2.7.1-devel_improved_AL_PLUS_240712_M1.zip/download and am NOT having the subprocess error reported by other Mac users in Superhound mode. MacBook Pro M2 chip Sonoma 14.6 (

Re: [wsjt-devel] Adjustable frequency shift for split operation?

W. You didn’t say what rig you are running, and what transmit bandpass you have selected. Your symptoms seem to point to transmit on a transmitter with a non-flat audio bandpass response. 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@list

Re: [wsjt-devel] Yaesu FT-891 USB Ports not listed in WSJT-X Radio settings on MacOS 14.5

I’m using a MacBook also running 14.5 on my FTDX-10 and have no problem finding the ports. Are you using a USB cable between the radio and the Mac and have the radio powered on when looking for the ports? Not familiar with the digirig but is it supposed to also provide a cat connection? Sent fr

Re: [wsjt-devel] Release Candidate WSJT-X 2.7.0-rc5

Since Alex is asking this question, does that mean there won't be any Mac M1 builds? > On Jul 1, 2024, at 8:30 PM, Alex Lelievre via wsjt-devel > wrote: > > Unfortunately I found out that this part of the code is actually closed > source! There goes the neighborhood! > > On a serious note h

Re: [wsjt-devel] WSJT-X program will not start

When you downloaded the .dmg file, there was also a readme and plist file. You need to follow the instructions in the readme and make sure you restart your Mac as instructed. > On Jun 28, 2024, at 8:34 AM, Thomas via wsjt-devel > wrote: > > Hello, > > I went back in and joined the list as th

Re: [wsjt-devel] Beacons / Non-synchronous Mode

as an avid participant and was very disappointed when it went away. Maybe this time use a SIMPSK protocol instead of vanilla PSK31. Food for thought. Best regards, Gary, K7EK ⁣Get BlueMail for Android ​ On May 19, 2024, 07:55, at 07:55, Ev Tupis via wsjt-devel wrote: >Hi Lance,We

Re: [wsjt-devel] Response to CQ ignored

e up a few seconds, I haven’t dig deeper. I’m not sure whether it did similar in other recent versions or not. Will also update Friday when it comes out. Love the software! 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] wsjt-devel Digest, Vol 119, Issue 45

I had the same thing happen as with Fred. Improved rc3 for Mac M1Sent from my iPhoneOn Jan 26, 2024, at 11:00 AM, Fred Price via wsjt-devel wrote: Screenshot of it happening to me with TX5S.  On Jan 26, 2024, at 10:51 AM, Uwe, DG2YCB via wsjt-devel wrote:  But it worked also when I

Re: [wsjt-devel] Error with Watchdog Timer in FT8 Mode

again. Sounds normal. The timer has timed out, so you need to reinitiate. To call that station, just double click that line where he is calling you. This happens regularly when someone calls after you’ve run out of time. Gary - - AG0N

Re: [wsjt-devel] FT8 on 160m with Beverage antenna

ver the overall noise. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] CQ Hound mode

frequency (which you can determine yourself), and he should never be in hound mode if he is in the normal FT frequency segment. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] No 73 allowed after RR73?

e band to one that is questionable and don’t realize it (not think to check it). It only happens once, as I noticed it immediately and make the change before the next contact. 73, Gary ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.

Re: [wsjt-devel] macOS - Is there a "quick" way of updating Hamlib on MacOS implementation?

Hi Dwayne: The Mac equivalent of the .dll file is the .dylib file. I compile the .dylib file daily (if there are changes) and can provide via my drop box. This morning’s version is here: https://www.dropbox.com/s/0m9v3i1ceb1bv19/libhamlib.4.dylib?dl=0 You would need to download and copy the li

Re: [wsjt-devel] Release Candidate WSJT-X 2.7.0-rc1

Here is the most recent Hamlib libhamlib.so.4.0.6 for Raspberry Pi (RPi version of the .dll) https://www.dropbox.com/s/a9gdyo3qayp86yc/libhamlib.so.4.0.6?dl=0 > On May 13, 2023, at 5:28 AM, Gary Rogers wrote: > > Here is the most recent Hamlib .dylib for MacOS (dylib is the Mac v

Re: [wsjt-devel] Release Candidate WSJT-X 2.7.0-rc1

I’m traveling today but will build hamlib for Mac in the morning and provide a link. Sent from my iPhone > On May 12, 2023, at 3:43 PM, Black Michael via wsjt-devel > wrote: > > Try this dll please > > https://www.dropbox.com/s/snmkzu8eif89yqs/libhamlib-4.dll?dl=0 > > Mike W9MDB > > >

Re: [wsjt-devel] Statement regarding WSJTX.groups.io

Thanks. Just joined. Gary N8GT Sent from my iPhone > On Apr 25, 2023, at 5:20 PM, William Smith via wsjt-devel > wrote: > > Log into Groups.io first, then follow the link, and there's a button to join. > > 73, Willie N1JBJ > > >> On Apr 25, 2023, at

Re: [wsjt-devel] Statement regarding WSJTX.groups.io

I’ve followed the links to the new group but it is circular. I asked for a new password( didn’t know I had one) and it says my email is incorrect. Gary N8GT Sent from my iPhone On Apr 25, 2023, at 10:30 AM, Uwe, DG2YCB via wsjt-devel wrote:  Dear WSJT-X Users, Unfortunately, complaints

Re: [wsjt-devel] Sourceforge download from https://wsjt.sourceforge.io/wsjtx.html should work again

This link worked for me. Thanks > On Apr 9, 2023, at 9:08 AM, Uwe, DG2YCB via wsjt-devel > wrote: > > Download of the v2.6.1 WSJT-X installer packages via our > https://wsjt.sourceforge.io/wsjtx.html homepage should work again now. There > seems to be some problem with SourceForge at the mome

Re: [wsjt-devel] Sourceforge download

The updated link works for me. Best regards, Gary, K7EK ⁣Get BlueMail for Android ​ On Apr 9, 2023, 06:02, at 06:02, Craig Bosworth KR4Q via wsjt-devel wrote: >As documented elsewhere, the suggestion below does not work. I would of >course be delighted if it were not so. > >

[wsjt-devel] Sourceforge download

Seeing multiple reports that WSJT-X cannot be downloaded from the Source forge website. I’ve tried both the WSJTX site and Source forge sites and have not been able to download WSJTX. Sent from my iPhone ___ wsjt-devel mailing list wsjt-devel@lists.s

[wsjt-devel] WSJT-X

t fix. Thanks and regards, Gary, G7RES. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Cat Control Mac #Mac

Been off the air for about five weeks. I’ve downloaded 2.6.1 on my MacBook Pro Ventura OSX 13. Tried to get on the air this evening and having rig control problems. I’ve selected the Silicon Labs driver and get a green cat control light and get a red PTT test light. As soon as I click ok the ban

[wsjt-devel] Request from WSPRNet Devs

infrastructure and will be undertaking at a rewrite of the spot ingress. It would be nice to have some WSJT-x contacts to be able to keep in the loop as we proceed. For example, I would like to look at a new spot upload format, for example, using a JSON schema. -- Gary _

Re: [wsjt-devel] WSJT-X 2.6.0 GA Release

anks to all for this software! > On Jan 6, 2023, at 9:22 AM, Uwe, DG2YCB via wsjt-devel > wrote: > > Try to download again. I think Sourceforge still had the old copy. But the > one I downloaded 1 minute ago has the correct entry. > > 73 de DG2YCB, > Uwe > > &

Re: [wsjt-devel] WSJT-X 2.6.0 GA Release

Same issue for me downloaded from new WSJT-X site. > On Jan 6, 2023, at 8:55 AM, Kari Sillanmäki via wsjt-devel > wrote: > > > Hi Uwe, > > I just downloaded the tarball. > It still has the wrong CmakeLists.txt entry... > > I used this link to download: > https://sourceforge.net/projects/wsj

Re: [wsjt-devel] Hamlib 4.5.2 test #hamlib

I’ve compiled 4.5.2 for Mac here: https://www.dropbox.com/s/ycqzp7uen1ktsrs/libhamlib.4.dylib?dl=0 > On Dec 21, 2022, at 9:12 AM, Charles Suckling via wsjt-devel > wrote: > > Hi Mike > > Also tested SDR-Console and my IC202 (that uses G4JNT IC756 emulator in a > PIC). So, happy here. > >

Re: [wsjt-devel] Hamlib 4.5.2 test #hamlib

problem. > > Hamlib is not involved in decoding at all. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Hamlib 4.5.2 test #hamlib

w days. Win 10 on an I7 older machine with lots of ram. As before, closing X and reopening, cures the problem. Reloads operating just fine. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/list

Re: [wsjt-devel] WSJT-X 2.6.0-rc5 hamlib failure for Flex radio

George, I compiled Hamlib for Mac this morning: https://www.dropbox.com/s/gqgp5yvu3cpbdre/libhamlib.4.dylib?dl=0 In findr, go to Applications, right click on WSJT-X app, select show package contents. Paste the file above into frameworks and respond yes when it asks to replace the file. > On N

Re: [wsjt-devel] WSJT-X 2.6.0-rc5 hamlib failure for Flex radio

George I compiled hamlib for Mac this AM: https://www.dropbox.com/s/gqgp5yvu3cpbdre/libhamlib.4.dylib?dl=0 libhamlib.4.dylib dropbox.com To to Applications, right click on WSJT-X app, select show package contents. Paste the file above into frameworks and respond yes when it asks to replace th

Re: [wsjt-devel] RC4 crashes

> On Nov 23, 2022, at 21:58, Black Michael via wsjt-devel > wrote: > > Would that switch to FT4 be occurring while decodes are still appearing on > the screen? Probably while or before decodes are happening, since they come so fast with heavy activit

Re: [wsjt-devel] RC4 crashes

. That’s on my list of things to do. Any idea when RC5 will break loose? Thank you, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Program crash

rought things back to normal again as far as I know. WSJT-X is restarted now and then when things settle down, just on principle. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Possible RC4 issue

t the mode drop down. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Possible RC4 issue

> enough and no need to reboot the total system. Will try to remember that, but I will be surprised if it happens again. ;-) Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Possible RC4 issue

estarted the night before. As for actually working people, probably no more than 10 minutes when I walked into the shack. Before that, it was just monitoring the band. By the way, it has again run trouble free since last night, so still may be a one-off deal.

Re: [wsjt-devel] Possible RC4 issue

> On Sun, Sep 18, 2022 at 10:32 PM Black Michael via wsjt-devel > mailto:wsjt-devel@lists.sourceforge.net>> > wrote: > About how long were you running when this happened? > > I also had a segfault when WSJTX was just decoding but it was probably 20 > hours of runtime.

[wsjt-devel] Possible RC4 issue

rs popped up. In order to get it back up and running, I had to reboot the system entirely. It seems to be running smoothly since then, as it had before. I suspect everything is fine and this was just a glitch. Gary - AG0N ___ wsjt-devel mailing

Re: [wsjt-devel] wsjt-x2.6.0-rc4-win64 map65 portaudio issue

long single horizontal antenna, LNA and a SSB TCVR with wsjt-x software can work the big stations like HP9Q, Hope this helps. Regards Gary G8EOH On 18/09/2022 11:30, piRshared.org via wsjt-devel wrote: Gary, May I please have a one sentence list of your EME transmitter, receiver and antennas

Re: [wsjt-devel] wsjt-x2.6.0-rc4-win64 map65 portaudio issue

Evening My present favourite Radio is - Yaesu FTdx101MD, antenna is a trapped vertical, op is 1-200Watts depending on conditions.. Regards Gary VK4OO > On 18 Sep 2022, at 20:30, piRshared.org via wsjt-devel > wrote: > > Gary, May I please have a one sentence list of your EME

[wsjt-devel] wsjt-x2.6.0-rc4-win64 map65 portaudio issue

needs to be looked at. But thought you may need to know my temporary fix. Regards Gary  G8EOH ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Linux alert woes

le. Apologies. Gary ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Linux alert woes

le are spewing out on the band when they don’t know how to properly configure their audio. Sorry, I think the program should remain quiet, as should all of them when running digital modes. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.source

Re: [wsjt-devel] Release Candidate WSJT-X 2.6.0-rc4

I was able to build rc4 for Windows with JTSDK (with the latest Hamlet build) and used it last night to make 17 QSOs. No issues to report. Also built it for Mac Intel but I am only able to test it in receive mode at present. No issues there either. > On Sep 7, 2022, at 9:28 AM, Joe Taylor via w

Re: [wsjt-devel] RC4 Minor Nit

Mine shows RC4 on both Windows and Mac... > On Sep 7, 2022, at 8:19 PM, Dennis Younker NE6I via wsjt-devel > wrote: > > I notice that RC4 displays itself as 2.5.4 instead of 2.6.0-rc4. Obviously > this does not affect performance but thought I would point it out. > > >

Re: [wsjt-devel] Watchdog timer for F/H?

e you “reset” the timer. In early documentation on the subject, it was explained. 73, Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Release Candidate WSJT-X 2.6.0-rc2

Was also able to build from source for Raspberry Pi without errors. Sent from my iPhone > On Jul 21, 2022, at 11:05 AM, Andrew Neumeier via wsjt-devel > wrote: > >  > To the WSJT-X team, > > Thanks for the release and the fix for my Omni VII, which now, no longer > hangs up in xmit. Speci

Re: [wsjt-devel] Release Candidate WSJT-X 2.6.0-rc2

For those compiling from source, note that the extracted folder is dated June 14, 2022 so you may have to look back in your download folder to find it. When compiling for Mac, got Hamlib errors but running: in your wsjt-x build directory, cd hamlib-prefix/src/hamlib then type: ./configure F

Re: [wsjt-devel] Release Candidate WSJT-X 2.6.0-rc1 Waterfall Issue

So I had the N Avg set to 2 which gave the intermittent displays. Reducing to N avg to 1 solved the problem. Any N Avg setting above 3 eliminates the time hack and band label. Guess I’ll leave it at 1…Thanks for your help! Gary KO3F > You've got barely enough room to show it -- the h

Re: [wsjt-devel] Release Candidate WSJT-X 2.6.0-rc1 Waterfall Issue

make the difference. > > If you decrease your "N Avg" by 1 they should all show up. > > I take it you increased your font size? > > Mike W9MDB > > > > > On Tuesday, June 21, 2022, 11:10:52 PM CDT, Gary Rogers via wsjt-devel > wrote: > >

[wsjt-devel] Fwd: [WSJTX] WSJT-X 2.6.0rc1 build error #macOS

FYI Sent from my iPhone Begin forwarded message: > From: "Gary Rogers via groups.io" > Date: June 16, 2022 at 10:22:04 AM PDT > To: m...@wsjtx.groups.io > Subject: [WSJTX] WSJT-X 2.6.0rc1 build error #macOS > Reply-To: m...@wsjtx.groups.io > > I’ve installe

Re: [wsjt-devel] Are you building WSJT-X ?

Hi Joe, - Building on what platform? Windows, Linux, macOS, or other? I am primarily a Mac user and after a couple of years' struggle, I finally was able to build v2.5.4 just last week. I used the late Bill Somerville’s documentation at https://www.evernote.com/pub/bsomervi/wsjt-xmacbuilds#st

Re: [wsjt-devel] Are you building WSJT-X ?

Hi Joe, - Building on what platform? Windows, Linux, macOS, or other? I am primarily a Mac user and after a couple of years' struggle, I finally was able to build v2.5.4 just last week. I used the late Bill Somerville’s documentation at https://www.evernote.com/pub/bsomervi/wsjt-xmacbuilds#st=

Re: [wsjt-devel] SUGGESTION

Thanks for the suggestions. Gary N8GT Sent from my iPhone > On Mar 6, 2022, at 1:09 PM, Gary McDuffie via wsjt-devel > wrote: > >  > >> On Mar 5, 2022, at 21:19, Gavin ZL3GAV via wsjt-devel >> wrote: >> >> With the TUNE button, can this be l

Re: [wsjt-devel] SUGGESTION

> On Mar 6, 2022, at 02:56, Alan via wsjt-devel > wrote: > > it's an important feature because many XCVR's do not offer this function in > a simple manner. Put the radio in CW mode and lock the key. Simple. Gary - AG0N _

Re: [wsjt-devel] SUGGESTION

he transmitter from destroying itself, or QRMing the rest of the people on the band. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] QSO 15 meters FT8 F/H not logged!

> On Feb 19, 2022, at 14:51, Grant VK5GR via wsjt-devel > wrote: > > As for how to ID exactly what mode they are running…. Let’s be clear. You’re not talking about MODEs here. Logged mode is till FT8. You’re talking about protocol or format. The mode is still FT8.

Re: [wsjt-devel] "Pwr" Slider Acting Goofy in WSJT-X v2.5.4

I’m a novice but I do use the mouse to control the power slider. I think W9MDB showed me that. Gary N8GT Sent from my iPhone > On Feb 12, 2022, at 3:24 AM, Saku via wsjt-devel > wrote: > > HI Tony! > > Have you tried to move mouse cursor on Pwr slider, not click at all

Re: [wsjt-devel] WSJT-X for Apple M1?

Yes i would love to see your instructions! Thanks Gary KO3F > On Dec 27, 2021, at 3:11 PM, Alex Lelievre via wsjt-devel > wrote: > > I wanted to post a progress update to getting WSJT-X built and running > natively on Apple M1 hardware. > > Today I managed to get FT

Re: [wsjt-devel] 2.5.3: missing diist tar ball

Try here: wsjtx-2.5.3.tgz > On Dec 24, 2021, at 6:50 PM, Tomasz Kłoczko via wsjt-devel > wrote: > > Hi, > > Looks like on https://sourceforge.net/projects/wsjt/files/wsjtx-2.5.3/ >

Re: [wsjt-devel] WSJT-X 2.5.3 crashes on TX5 with slash in call

You gentlemen are amazing Sent from my iPhone On Dec 24, 2021, at 12:27 PM, Black Michael via wsjt-devel wrote:  The problem is somewhat random. We've already found a fix for it and a new version should be released soon. Mike W9MDB On Friday, December 24, 2021, 11:19:53 AM CST, alan2---

Re: [wsjt-devel] WSJT-X 2.5.3 GA Release for macOS

John and Joe, I made 27 QSOs on FT8 and FT4 last night using 2.5.3 on Monterey 12.0.1…Everything seems to be working as it should. > On Dec 14, 2021, at 4:03 AM, John Nelson via wsjt-devel > wrote: > > Hi Joe, > > This morning I checked the DMG download on 12.0.1 and also 12.1 on an Intel >

Re: [wsjt-devel] WSJT-X 2.5.3 GA Release for macOS

It installed ok on my MacBook Pro (Intel) and connected to my radio…Haven’t had a chance to use it on the air yet though. > On Dec 13, 2021, at 10:38 AM, George J Molnar via wsjt-devel > wrote: > > Working without incident on my M1 Mac mini under Monterey 12.0.1. > > George J Molnar > Colleg

Re: [wsjt-devel] Bill Somerville, G4WJS, SK

Very sad news, my condolences to Bills friends and family…. Gary VK4OO > On 5 Dec 2021, at 19:15, John Nelson via wsjt-devel > wrote: > > Joe, > > I am saddened to learn of your news. This is blow to the WSJT-X community. > > In the early days of Bill’s involv

Re: [wsjt-devel] Question FT8

r opinion right now, but I know I’m not the only one. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Question, FT8

O clicks. Yep, takes probably a half a sequence to figure out those steps and get it done. By then, it won’t decode and you have to wait until the next cycle. Ridiculous waste of time. Just default it to send. It takes ONE click to kill it if it isn’t

Re: [wsjt-devel] Audio Button

Thanks so much. Will try Bill’s suggestions. Will call if I am still not successful. 73, Gary Sent from my iPhone > On Sep 18, 2021, at 4:18 PM, Gary trock wrote: > > Wow. Didn’t know any of this. Will try when I get back to it, working > tomorrow. Will call if I need more

Re: [wsjt-devel] Audio Button

Wow. Didn’t know any of this. Will try when I get back to it, working tomorrow. Will call if I need more help. Thanks again. 73 Gary Sent from my iPhone > On Sep 18, 2021, at 4:05 PM, Bill Somerville via wsjt-devel > wrote: > > On 18/09/2021 20:18, Gary trock via wsjt-devel wrot

[wsjt-devel] Audio Button

request any assistance. Gary Trock N8GT gtroc...@msn.com Sent from my iPhone ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Possible feature request, time skew notification?

y can’t tell a thing about the timing or quality of incoming signals. That’s the cost of setting up that way. Use the tools within the program itself. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net

Re: [wsjt-devel] Message Bit to Request Other Station to QSY to your Frequency

craft reflections coming out of DIA and we are quite thankful that we all transmitting at the same time most of the time. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Message Bit to Request Other Station to QSY to your Frequency

ng factor as far as I can see. Not many people can run down to the corner radio store and grab a new radio off the shelf just to add some extra bandwidth for digital modes. Gary - AG0N___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://

Re: [wsjt-devel] WSJT-X - 2.4.0 startup screen handling

On Jul 8, 2021, at 4:51 AM, Bill Somerville wrote:you are the first to report that behaviour. What should happen, and does when I start WSJT-X, is a message about the number of worked before records discovered in your WSJT-X ADIF log is written to the status bar *in place* o

Re: [wsjt-devel] Message Bit to Request Other Station to QSY to your Frequency

Again, I think you’re trying to program a fix for something that can easily be done by the operators. Gary - AG0N___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Re: [wsjt-devel] Call for information about PC systems being used for WSJT-X

ou need to check it > on Intel web page. I did check Intel’s page, as reported. There is no number after i7, unless the separate number 920 makes a diff. Full line : Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz 2.67GHz. The CPU date is 2008. Intel makes no mention of features, other th

Re: [wsjt-devel] Call for information about PC systems being used for WSJT-X

Bill, I looked into what I’m running here and found it is a Gen 1 i7 2.67GHz from Intel. Basically says no features on the Intel site, and no mention of AVX or similar on that processor. Gary - AG0N ___ wsjt-devel mailing list wsjt-devel

  1   2   3   4   5   >