Re: [wsjt-devel] Ubuntu installation

2022-09-02 Thread Richard Stanley via wsjt-devel
I do this, I am sure there are better ways to do it but for an hours initial setup updates take minutes. Richard G7OED -- Install required files open terminal and copy and paste

Re: [wsjt-devel] Automatization QSO

2018-06-14 Thread Richard Stanley via wsjt-devel
Hi all Already been done by sv5dkl his station has worked in excess of 13,500 stations since last July he has posted a howto on youtube. I cannot see the point in a robot station or understand how people cannot click for themselves and feel the need for autoseq on which makes the whole

Re: [wsjt-devel] Bug Report: Version 1.9.1

2018-06-07 Thread Richard Stanley via wsjt-devel
You seem intent on proving there is something wrong with vista or wsjt-x. Do you use any other digital mode programs for say psk31 or SSTV ?. I would maybe suggest using one of those and see if they lock up when you tune. I fail to see why you are looking at your operating system or the software

Re: [wsjt-devel] Bug Report: Version 1.9.1

2018-06-06 Thread Richard Stanley via wsjt-devel
Mine used to do this regular on 40 mtrs even at 5 watts. I changed to a shielded USB cable and never had it happen since on any band or power. Yours may not be an RFI issue but the symptoms are identical to mine. Richard G7OED From: John C. Westmoreland, P.E. Sent: Wednesday, June 6, 2018 8:03

Re: [wsjt-devel] How much operating time before rebooting your computer

2018-04-25 Thread Richard Stanley via wsjt-devel
Mine is running all the time unless I do the occasional reboot. Never been an issue here. Richard G7OED From: Ray Jacobs Sent: Wednesday, April 25, 2018 11:51 PM To: wsjt-devel@lists.sourceforge.net Subject: [wsjt-devel] How much operating time before rebooting your computer I left WSJT

Re: [wsjt-devel] DXpedition Mode on 40 Meters?

2018-03-29 Thread Richard Stanley via wsjt-devel
I do not understand why the dxp mode cannot be used on the standard FT8 freqs, ft8 users do not want the junk on their freqs but are quite happy to walk all over everyone else is that the modern day version of the ham spirit :(. I keep reading that band blocks cannot be put in but that is a lie

Re: [wsjt-devel] Ft 8 in Exhibition Mode

2018-03-22 Thread Richard Stanley via wsjt-devel
Anybody could see this was going to happen I would be surprised if anybody is shocked Richard G7OED From: Ray Jacobs Sent: Wednesday, March 21, 2018 10:16 PM To: wsjt-devel@lists.sourceforge.net Subject: [wsjt-devel] Ft 8 in Exhibition Mode You were right they were on the same frequency as

Re: [wsjt-devel] DXpedition mode: dissapointed somehow

2018-03-14 Thread Richard Stanley via wsjt-devel
Hi all I do not think that pleading for “good operating sensibilities and consideration for others” will do much good. I did query ages ago when this mode was 1st being mentioned that if it was a good idea but got shouted down. All I see nowadays is people answering a cq then deciding to call

Re: [wsjt-devel] FT8 DXpedition Mode

2018-02-02 Thread Richard Stanley via wsjt-devel
Hi I assume the sample freq of 14.080 was just that as the rtty boys will not be happy if we start walking all over what is generally accepted as rtty space (at least in Europe). I did like the mention that they may look for the lower SN might give the qrp boys a chance. Richard G7OED

Re: [wsjt-devel] Unable to Build

2017-09-29 Thread Richard Stanley via wsjt-devel
It is a corrupt file somewhere, rename C:/JTSDK/src/wsjtx to say C:/JTSDK/src/wsjtx1 Then try build-wsjtx rinstall and it will build just fine and update after that. Richard g7oed -Original Message- From: Dan Malcolm Sent: Friday, September 29, 2017 7:37 PM To: 'WSJT software

Re: [wsjt-devel] Unable to Build

2017-09-29 Thread Richard Stanley via wsjt-devel
I have the same issue here but only for 1.7 If I do build-wsjtx -b dev -n wsjtx-1.8 -c release -t install It updates (to 8084) just fine but build-wsjtx rinstall or build-wsjtx -b dev -n wsjtx -c release -t install both give the same sourceforge update error ? Not over fussed myself as not keen

Re: [wsjt-devel] Build instructions

2017-08-29 Thread Richard Stanley via wsjt-devel
build-wsjtx package will give you a self installing file. Richard G7OED From: Tom Melvin Sent: Tuesday, August 29, 2017 10:43 PM To: WSJT software development Subject: [wsjt-devel] Build instructions Hi Simple question - or can someone point me at related docs. Downloaded the JTSDK (For

Re: [wsjt-devel] increasing false decodes in Version R7895

2017-07-16 Thread Richard Stanley via wsjt-devel
Hi Ron not sure if there is a more elegant way but I wsjtx-list –u build-wsjtx -b dev -n wsjtx-1.8 -c release -t install This works for me. Richard G7OED From: Ron Gibson Sent: Sunday, July 16, 2017 4:45 PM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] increasing false

Re: [wsjt-devel] Distribution

2017-07-11 Thread Richard Stanley via wsjt-devel
Because I saw somewhere that you would prefer for people to only run the official ones for now I downloaded from Joes link and it is 7843 so should I stop using it and build from JTSDK as normal ? Joe has released it so I fail to understand how it could be an unofficial source ? I am out so

Re: [wsjt-devel] JTSDK Usage and Policy Guidelines

2017-07-03 Thread Richard Stanley via wsjt-devel
I did that even made videos and posted them on facebook even though Gregs instructions are more than adequate. I had a friend who started to distribute and I got grief for teaching him. I have even used teamviewer to setup JTSDK on peoples computers buut since the grief I have not done this.

[wsjt-devel] 1.6.0 jt9 submodes

2015-11-17 Thread Richard Stanley
jt9 submodes don't appear to be working in jt9 works fine in 1.6.1 decoding far superior in recent version, it now outperforms the jt65hf variant 100% of the time. Richard g7oed ex m0clz --

Re: [wsjt-devel] 1.6.0 jt9 submodes

2015-11-17 Thread Richard Stanley
sorry should have said using build 6108 -Original Message- From: Richard Stanley Sent: Tuesday, November 17, 2015 3:58 PM To: WSJT software development Subject: [wsjt-devel] 1.6.0 jt9 submodes jt9 submodes don't appear to be working in jt9 works fine in 1.6.1 decoding far superior

Re: [wsjt-devel] 1.6.0 jt9 submodes

2015-11-17 Thread Richard Stanley
Sorry That would be why :) Richard g7oed -Original Message- From: Joe Taylor Sent: Tuesday, November 17, 2015 4:24 PM To: WSJT software development Subject: Re: [wsjt-devel] 1.6.0 jt9 submodes JT9 submodes do not exist in v1.6.0. On 11/17/2015 10:58 AM, Richard Stanley wrote: > &g

Re: [wsjt-devel] jt65 signal subtraction

2015-10-29 Thread Richard Stanley
Hi I missed 6020 because I was out but have been running 6021 alongside jt65hf for most of the evening on 40 mtrs. Where as before jt65hf-hb9hqx would consistently outperform wsjt-x 95% of the time in the last 3 to 4 hours wsjt-x has picked up everything received by jt65hf plus others missed

Re: [wsjt-devel] Fwd: Fortran runtime error

2015-10-18 Thread Richard Stanley
The fortran error is only with jt65, select just jt9 and no fortran error, it's been like that for the last week or so. I assumed it was just because the sfrsd2 was being tested and everything was being optimised for that. Richard -Original Message- From: sq5rix Sent: Monday, October

Re: [wsjt-devel] WSJT-X JT65A Decode performance

2015-09-20 Thread Richard Stanley
A zlp is a g4zlp interface Built in sound card using Texas Instruments audio codec Richard m0clz -Original Message- From: Joe Taylor Sent: Wednesday, September 16, 2015 10:15 PM To: WSJT software development Subject: Re: [wsjt-devel] WSJT-X JT65A Decode performance I have no

Re: [wsjt-devel] WSJT-X JT65A Decode performance

2015-09-16 Thread Richard Stanley
The 15:29 and 15:30 wsjt-x got nothing. the 1531 had 1 extra. I will put it on 20 mtrs in a bit and post some more wav files here with all the info as 15 is pretty dead here. The lost decodes are very regular, so regular that I now run wsjt-x and jt65-hf-hb9hqx together because wsjt-x is missing

Re: [wsjt-devel] WSJT-X JT65A Decode performance

2015-09-16 Thread Richard Stanley
@lists.sourceforge.net Subject: Re: [wsjt-devel] WSJT-X JT65A Decode performance On 16/09/2015 21:50, Richard Stanley wrote: Hi Richard, My sample rate is 1 channel 16 bit 48000 Hz This is the interface built into the IC-7100 I do have a spare zlp interface so will get it out tomorrow and run the jt65-hf

Re: [wsjt-devel] WSJT-X JT65A Decode performance

2015-09-16 Thread Richard Stanley
each of the above files? Can we see the decoded results? If the recordings were made with WSJT-X, was the computer set up properly with 48 kHz sample rate? -- Joe, K1JT On 9/16/2015 4:17 PM, Richard Stanley wrote: > The 15:29 and 15:30 wsjt-x got nothing. > the 1531 had 1 extra. > I

Re: [wsjt-devel] WSJT-X JT65A Decode performance

2015-09-16 Thread Richard Stanley
My sample rate is 1 channel 16 bit 48000 Hz This is the interface built into the IC-7100 I do have a spare zlp interface so will get it out tomorrow and run the jt65-hf-hb9hqx from that and wsjt-x from the built in interface, this way it will be different soundcard interfaces with the same

Re: [wsjt-devel] Problems with wsjt and Rigblaster advantage on Ubuntu

2015-08-31 Thread Richard Stanley
I never use wsjt what mode are you after ? That version is very old current version is 10.0 5755 to build wsjt build-wsjt after jtsdk is installed. do not need anybodys ppa if you compile from the info i gave you. I have been reading what you write on the reflector. I use wsjt-x 1.6.1 it has jt65

Re: [wsjt-devel] wsjtx decodes

2015-08-27 Thread Richard Stanley
me to do the limited test. It was on 48 but recently upgraded to win10 and it must have reset it to 44 ? Richard m0clz From: Bill Somerville Sent: Thursday, August 27, 2015 10:09 PM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] wsjtx decodes On 27/08/2015 22:01, Richard

Re: [wsjt-devel] Doc checkout and generation

2015-07-01 Thread richard stanley
I use build-wsjt Richard m0clz From: Bill Ockert - ND0B Sent: Wednesday, July 01, 2015 6:21 PM To: WSJT Developers Subject: [wsjt-devel] Doc checkout and generation Good afternoon, I am attempting to update the WSJT documentation to include my recent changes to ISCAT and am running into

Re: [wsjt-devel] WSJT-Suite v1.0.30 Available For Testing

2015-06-15 Thread richard stanley
Hi Pat I click the Halt Tx button if it is already txing. From: Pat Gmail Sent: Monday, June 15, 2015 1:04 PM To: wsjt-devel@lists.sourceforge.net Subject: [wsjt-devel] WSJT-Suite v1.0.30 Available For Testing Hi All, I have install the WSJT-Suite v1.0.30 and found the same problem in the

Re: [wsjt-devel] WSJT-X: WSPR band hopping and tune up.

2015-06-06 Thread richard stanley
Hi This is more a request is it possible to have 6mtrs and 4mtrs included as options in the band hopping schedule ? I have looked through in case there was a switch for it but cannot find one. Regards Richard m0clz. -Original Message- From: Bill Somerville Sent: Saturday, June 06,

Re: [wsjt-devel] WSJT-X: WSPR band hopping and tune up.

2015-06-06 Thread richard stanley
Hi Bill Yes that works great Thanks Richard m0clz -Original Message- From: Bill Somerville Sent: Saturday, June 06, 2015 3:06 PM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] WSJT-X: WSPR band hopping and tune up. On 06/06/2015 14:45, richard stanley wrote: Hi Hi

Re: [wsjt-devel] WSPR issue after JT split operation

2015-06-02 Thread richard stanley
I will be honest i'm not at all literate in FFT effects so may have completely the wrong end of the stick here.. I use split because I can tx a full 5 watts in the centre of the waterfall but as I go below 1000 or above 2000 my power drops off. Now I use split the tx moves so i'm back to 5

Re: [wsjt-devel] Beginner trying to build WSJT-X

2015-06-01 Thread richard stanley
Hi Bill It's the links on the development page http://physics.princeton.edu/pulsar/K1JT/devel.html They link to jtsdk 1.5 it doesn't build anymore. I have shown Charlie where the version 2 stuff is so he should be ok now. Richard m0clz -Original Message- From: Bill Somerville Sent:

Re: [wsjt-devel] JTSDK Question

2015-05-23 Thread richard stanley
build-wsjtxexp rinstall build-wsjtxexp package (not really needed as can run rinstall from C:\JTSDK\wsjtx_exp\install\Release\bin\wsjtx.exe You need to edit the wsjt-x ini file or delete it and start from fresh as the frequencys in the list have changed and it played up for me until I deleted

Re: [wsjt-devel] WSPR mode in WSJT-X v1.6.1

2015-05-13 Thread richard stanley
Some more feedback using 5376 on 40 mtrs wspr pleased to see the line with band marking on the receive window and the counter in the status bar till next tx is a nice touch. it's decoding and sending great. I have not used wspr since the early versions so I cannot compare it to that but it

Re: [wsjt-devel] WSPR mode in WSJT-X 1.6.1-devel

2015-05-13 Thread richard stanley
Hi Claude I'm not a programmer i'm just an impatient user who compiles so he doesn't have to wait. I check https://sourceforge.net/p/wsjt/wsjt/HEAD/tree/ If it says /branches/wsjtx_exp then I know that 1.6.1 has been updated so I compile and hope it runs (99% run so far) If it says

Re: [wsjt-devel] WSJTX 1.6.1

2015-05-12 Thread richard stanley
checkout-wsjtxexp build-wsjtxexp checkout command maybe wrong but the build command will give the correct checkout command. From: Josh Rovero Sent: Tuesday, May 12, 2015 10:48 PM To: wsjt-devel@lists.sourceforge.net Subject: [wsjt-devel] WSJTX 1.6.1 I'm routinely svn'ing and building wjstx

Re: [wsjt-devel] WSPR mode in WSJT-X 1.6.1-devel

2015-05-12 Thread richard stanley
it's in version 1.6.1 not 1.5 or 1.6.0 Richard m0clz -Original Message- From: Claude Frantz Sent: Tuesday, May 12, 2015 12:08 PM To: WSJT software development Subject: Re: [wsjt-devel] WSPR mode in WSJT-X 1.6.1-devel On 05/12/2015 12:45 PM, David White wrote: I used WSPR mode the

Re: [wsjt-devel] WSPR mode in WSJT-X v1.6.1

2015-05-11 Thread richard stanley
I have been playing with it on 20 mtrs and 40 mtrs. I noticed with tx pct 20% it appeared to tx every other minute but at 10% it appears to be random. I have not tried 20% in recent versions so it may be more random now. A nice mode with just 0.5 watts I was seen in vk/zl/vp8 on 40mtrs 2 nights

Re: [wsjt-devel] Summary of wsprnet.org server processing times

2015-04-22 Thread richard stanley
-Original Message- From: Joe Taylor Sent: Wednesday, April 22, 2015 2:17 PM To: WSJT software development Subject: Re: [wsjt-devel] Summary of wsprnet.org server processing times snip Comments on this possible course of action would be welcome, from anyone! -- 73, Joe, K1JT I would

Re: [wsjt-devel] Temporary files

2015-04-11 Thread richard stanley
I just checked I have 35 so mine seems ok, I use jtsdk to build wsjt-x only. Richard m0clz -Original Message- From: Guy G4DWV/4X1LT Sent: Saturday, April 11, 2015 1:40 PM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] Temporary files Alessandro Gorobey algiuga@...

Re: [wsjt-devel] Build error on r5088

2015-03-23 Thread richard stanley
I normally watch here https://sourceforge.net/p/wsjt/wsjt/HEAD/tree/ Richard m0clz From: Neil Zampella Sent: Monday, March 23, 2015 10:46 PM To: WSJT software development Subject: Re: [wsjt-devel] Build error on r5088 Didn't see the update come across in the list digest. Just kicked off a

Re: [wsjt-devel] WSJT-X: automatic processing of received messages enhancements

2015-03-15 Thread richard stanley
The double clicking on the incoming text is good for people like my wife who is nervous of making a mistake and though she never does make a mistake is always worried about making one. Using this method she knows everything is in the right order. I understand things go wrong but she is always

Re: [wsjt-devel] WSJT-X: automatic processing of receivedmessagesenhancements

2015-03-15 Thread richard stanley
processing of receivedmessagesenhancements On 15/03/2015 01:35, richard stanley wrote: Hi Richard, I have had several qso's this evening using 5056 both calling cq and answering cq calls and the double clicking the sent text for a reply worked fine as did the log input but all calls were

Re: [wsjt-devel] WSJT-X: automatic processing of received messagesenhancements

2015-03-14 Thread richard stanley
I have had several qso's this evening using 5056 both calling cq and answering cq calls and the double clicking the sent text for a reply worked fine as did the log input but all calls were standard calls. The 1 thing I noticed was I started to call cq but got distracted a station replied and

Re: [wsjt-devel] CMake error wsjtx on svn .gt. r5026

2015-03-11 Thread richard stanley
It's in now Alessandro. I like the band notification as i'm always band hopping. Can't wait for someone to test jt4 with. @Joe I always keep 1.4 just in case but so far only had 1 revision that I couldn't use and that was before xmas. I just wished I understood code more. Richard m0clz

Re: [wsjt-devel] Band Activity Sort

2015-03-08 Thread richard stanley
I hadn't really noticed they were in order before for me it # is jt65 and @ is jt9 Richard m0clz -Original Message- From: Neil Zampella Sent: Sunday, March 08, 2015 7:31 PM To: wsjt-devel@lists.sourceforge.net Subject: [wsjt-devel] Band Activity Sort Hi all, I'm not sure if I'm the

[wsjt-devel] psk reporter

2015-02-23 Thread richard stanley
Hi Has the way wsjtx sends reports/version to the psk reporter website changed ?. Normall it say for example WSJT-X r4978 ARMv7 1 DG0OPK WSJT-X r4978-dirty 1 KK1D WSJT-X r4982 2 W9MDB, M0CLZ WSJT-X r4982 ARMv7 1 DG0OPK WSJT-X r4986 ARMv7 1 DG0OPK Now it

Re: [wsjt-devel] psk reporter

2015-02-23 Thread richard stanley
Hi Bill Great I had visions of stations wanting their own line in the stats and the whole lot becoming a mess. I understand why the version bit was added I just think that the other bit might get abused by people once they work out how to do it Regards Richard m0clz

Re: [wsjt-devel] WSPR frequency protection range in WSJTX

2015-02-21 Thread richard stanley
I see jt65 signals in the wspr section on 30MHz I assume that other jt65 programs do not have the wspr section protected. Richard m0clz -Original Message- From: Joe Taylor Sent: Saturday, February 21, 2015 1:52 AM To: WSJT software development Subject: Re: [wsjt-devel] WSPR

Re: [wsjt-devel] JTSDK v2.0.0-B2 for Linux Available For BuildTesting

2015-02-17 Thread richard stanley
just search for jtsdk https://sourceforge.net/projects/jtsdk/files/linux-x86/ Richard m0clz -Original Message- From: nick Sent: Tuesday, February 17, 2015 10:38 AM To: Greg Beam ; WSJT software development Subject: Re: [wsjt-devel] JTSDK v2.0.0-B2 for Linux Available For BuildTesting

Re: [wsjt-devel] Possible Detection/Fix for KV Decoder Errors w/Windows OS

2014-12-23 Thread richard stanley
I have run most revisions since r6373 and at the moment am running r4848 and never had a crash while decoding yet. I have windows 7 with all updates installed. It is a six core amd unit with 8GB ram. WSJTX is set for decode deepest and the waterfall to bins/pixels 3 and the default jt65 2500

[wsjt-devel] multiple users ?

2014-12-09 Thread richard stanley
Hi My wife has decided to take up jt65 as well. What I did was rename wsjtx-log wsjtx-log moclz then just put here name into the program, then when I go on rename her log file to wsjtx-log 2e0nce and remove the m0clz from mine. This seems long winded is there an easier way ? I know I could set

[wsjt-devel] jstdk version 2

2014-12-05 Thread richard stanley
I had problems the last time I tried as it wouldn't execute on my 64 bit windows, and ended up installing to a 32 bit windows in a vm box then copying everything over but I had issues still. The latest one installs and works great and everything builds fine. I have built everything with no

[wsjt-devel] JTSDK-2.0.0-B1-Win32 on a 64 bit machine ?

2014-12-03 Thread richard stanley
I downloaded this earlier and it wouldn’t work on my 64 bit windows 7. To get the files I had to install it into a 32bit windows in a vm window then rar the files and install to my 64 bit machine that way. I have programs that don’t run on 64 bit win7 hence the reason I have a vm for 32bit

[wsjt-devel] Fw: JTSDK-2.0.0-B1-Win32 on a 64 bit machine ?

2014-12-03 Thread richard stanley
I downloaded this earlier and it wouldn’t work on my 64 bit windows 7. To get the files I had to install it into a 32bit windows in a vm window then rar the files and install to my 64 bit machine that way. I have programs that don’t run on 64 bit win7 hence the reason I have a vm for 32bit

Re: [wsjt-devel] where is wsjt-dev-guide.html

2014-11-29 Thread richard stanley
Hi Alan Try http://physics.princeton.edu/pulsar/K1JT/wsjtx-doc/dev-guide-main.html Richard M0CLZ -Original Message- From: Alan VK2ZIW Sent: Saturday, November 29, 2014 10:14 AM To: WSJT software development Subject: [wsjt-devel] where is wsjt-dev-guide.html Hi all, The webpage:

[wsjt-devel] Cat control and the ic-7410

2014-10-20 Thread richard stanley
Hi Has anybody got the new wsjt-x to talk to an ic-7410 ?. Mine keeps refusing the connection, I have tried with the built in usb and a separate cat lead and keep getting Hamlib error: Command rejected by the rig while setting current VFO Just tried it with r4549 still no joy. I have tried

Re: [wsjt-devel] Cat control and the ic-7410

2014-10-20 Thread richard stanley
-Original Message- From: Bill Somerville Sent: Tuesday, October 21, 2014 12:31 AM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] Cat control and the ic-7410 On 21/10/2014 00:25, richard stanley wrote: Hi Hi Richard, Has anybody got the new wsjt-x to talk to an ic-7410

Re: [wsjt-devel] Cat control and the ic-7410

2014-10-20 Thread richard stanley
-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] Cat control and the ic-7410 On 21/10/2014 01:05, richard stanley wrote: Hi Bill Hi Richard, Thanks for the reply Still no Joy I have ci-v transceive off ci-v address 80h ci-v baud rate19200 data mode usb on the radio

Re: [wsjt-devel] Cat control and the ic-7410

2014-10-20 Thread richard stanley
Somerville Sent: Tuesday, October 21, 2014 1:57 AM To: wsjt-devel@lists.sourceforge.net Subject: Re: [wsjt-devel] Cat control and the ic-7410 On 21/10/2014 01:50, richard stanley wrote: Hi Bill Hi Richard, I don't know why my compiles are not working but that works great with or without the dtr

Re: [wsjt-devel] Cat control and the ic-7410

2014-10-20 Thread richard stanley
-1.4.0-rc3-win32-r4547.exe this is a normal release version without the tracing. It should keep you going until I can get the Hamlib changes published. 73 Bill G4WJS. On 21/10/2014 01:57, Bill Somerville wrote: On 21/10/2014 01:50, richard stanley wrote: Hi Bill Hi Richard, I don't know why my

Re: [wsjt-devel] WSJT Developers Guide

2014-10-16 Thread richard stanley
Hi Joe My bad just read the special instructions. 73 Richard m0clz -Original Message- From: Joe Taylor Sent: Thursday, October 16, 2014 2:42 PM To: algi...@libero.it ; WSJT software development Subject: Re: [wsjt-devel] WSJT Developers Guide Hi Alessandro, You are correct: the posted