m: Lissa Valletta/Poughkeepsie/IBM@IBMUS
To: xCAT Users Mailing list ,
Cc: xCAT Users Mailing list
Date: 10/26/2012 06:27 AM
Subject: Re: [xcat-user] postscript not run after install?
The chart is based on the type of install Statefull/stateless/statelite.
The type of hardw
: [xcat-user] postscript not run after install?
On Thu, 25 Oct 2012 11:59:31 Lissa Valletta wrote:
> So it depends on the OS and the type of install ( diskfull, diskless).
>
> Look at the description in the postscripts table of postscripts and
> postbootscripts attributes. To do this
On Thu, 25 Oct 2012 11:59:31 Lissa Valletta wrote:
> So it depends on the OS and the type of install ( diskfull, diskless).
>
> Look at the description in the postscripts table of postscripts and
> postbootscripts attributes. To do this run
>
> man postscripts
>
> If you want the details of
] postscript not run after install?
On Wed, 26 Sep 2012 23:45:07 you wrote:
> Yes, I sent another note when I discovered the note with the
information.
> I came to the same conclusion, if was really just some of the
postscripts
> not running. In this case the setup is fine, you jus
On Wed, 26 Sep 2012 23:45:07 you wrote:
> Yes, I sent another note when I discovered the note with the information.
> I came to the same conclusion, if was really just some of the postscripts
> not running. In this case the setup is fine, you just need to look at
> those postscripts.
>
>
We
293) 433-3102
From: Francois Bissey
To: xCAT Users Mailing list
Date: 09/26/2012 07:17 AM
Subject:Re: [xcat-user] postscript not run after install?
On 26/09/12 22:54, Lissa Valletta wrote:
> It does run the wget also. Typically, the problem here is the address
> to
2-3/T12
Poughkeepsie, NY 12601
(tie 293) 433-3102
From: François Bissey
To: xCAT Users Mailing list
Date: 09/25/2012 10:31 PM
Subject: Re: [xcat-user] postscript not run after install?
Ended up being extremely busy the last 2 days.
On Fri, 21 Sep 2012 08:06:20 Lissa Valle
On 26/09/12 22:54, Lissa Valletta wrote:
> It does run the wget also. Typically, the problem here is the address
> to MN is resolvable after install but not during. One difference is you
> are not running your otherpkgs postscript when you user updatenode -P.
> Did you remove otherpkgs from
lsdef of the node also.
Lissa K. Valletta
2-3/T12
Poughkeepsie, NY 12601
(tie 293) 433-3102
From: François Bissey
To: xCAT Users Mailing list
Date: 09/25/2012 10:54 PM
Subject:Re: [xcat-user] postscript not run after install?
On Fri, 21 Sep 2012 08:06:20 Lissa Valletta
On Fri, 21 Sep 2012 08:06:20 Lissa Valletta wrote:
> It is best not to put files under /install/postscripts except
> postscripts, because that is going to be copied to the nodes, everytime
> you run updatenode .Do you see all those files under /xcatpost and are
> you sure those 1000 files a
Ended up being extremely busy the last 2 days.
On Fri, 21 Sep 2012 08:06:20 Lissa Valletta wrote:
> It is best not to put files under /install/postscripts except
> postscripts, because that is going to be copied to the nodes, everytime
> you run updatenode .Do you see all those files under
-user] postscript not run after install?
On 21/09/12 23:26, Lissa Valletta wrote:
> why 1000+ files.Do you have a lot of your own files under
> /install/postscripts?
I must say that's more than I expected and certainly I/we didn't
put that many (certainly less than a 100 to ta
On 21/09/12 23:26, Lissa Valletta wrote:
> why 1000+ files.Do you have a lot of your own files under
> /install/postscripts?
I must say that's more than I expected and certainly I/we didn't
put that many (certainly less than a 100 to take a safe margin)
since it was first installed. I must s
To: xCAT Users Mailing list
Date: 09/21/2012 06:57 AM
Subject:Re: [xcat-user] postscript not run after install?
On 21/09/12 22:34, Lissa Valletta wrote:
>What level of code are you on again?
2.6.11
> Did you look at /tmp/wget.log on the node and see if there are errors
On 21/09/12 22:34, Lissa Valletta wrote:
>What level of code are you on again?
2.6.11
> Did you look at /tmp/wget.log on the node and see if there are errors.
yes and there was no errors. just downloads of rpm in the usual output
format of wget. No errors at all.
> Is there an /xcatpost
either in /tmp or in /xcatpost after the install depending on your
release.
This problem
Lissa K. Valletta
2-3/T12
Poughkeepsie, NY 12601
(tie 293) 433-3102
From: François Bissey
To: xCAT Users Mailing list
Date: 09/20/2012 07:58 PM
Subject: Re: [xcat-user] postscript not
> > > After install, look at /var/log/xcat.log, does it show running your
> > > postscripts.
>
> No /var/log/xcat.log found on the node:
>
> ls /var/log
> ConsoleKit acpid cups faillog lastlogmail.err
> messages platform scpm zypp
> NetworkManager boot.log d
On Thu, 20 Sep 2012 15:58:23 François Bissey wrote:
> On Wed, 19 Sep 2012 08:39:40 Lissa Valletta wrote:
> > A couple of things to check. The postscripts you added , are they all
> > -rwxr-xr-x in /install/postscripts.
> > IBMhpc.postscript,ge.create.fen,usrlocalpower7,credential
>
> All permis
On Wed, 19 Sep 2012 08:39:40 Lissa Valletta wrote:
> A couple of things to check. The postscripts you added , are they all
> -rwxr-xr-x in /install/postscripts.
> IBMhpc.postscript,ge.create.fen,usrlocalpower7,credential
All permissions are correct.
> After install, go to the /tmp directory on
293) 433-3102
From: Francois Bissey
To: xCAT Users Mailing list
Date: 09/19/2012 08:25 AM
Subject:Re: [xcat-user] postscript not run after install?
On 19/09/12 23:35, Lissa Valletta wrote:
> I need you to run lsdef on the Management node for the
>where you are
On 19/09/12 23:35, Lissa Valletta wrote:
> I need you to run lsdef on the Management node for the
>where you are having problems. Your mypostscript shows it
> was only asked to run the syslog postscript.
root@xcat2-c:~# lsdef p7n14-c
Object name: p7n14-c
arch=ppc64
cons=hmc
cur
ois Bissey
To: xCAT Users Mailing list
Date: 09/18/2012 09:46 PM
Subject: Re: [xcat-user] postscript not run after install?
On Fri, 17 Aug 2012 06:48:29 Lissa Valletta wrote:
> Could you give us a copy of you mypostscripts file from a node. An
lsdef
> of that node and what l
On Fri, 17 Aug 2012 06:48:29 Lissa Valletta wrote:
> Could you give us a copy of you mypostscripts file from a node. An lsdef
> of that node and what level of xCAT are you running.
> The code comes from /install/postscripts/xcatdsklspost. At least in 2.7.3,
> which is what I am running. This h
.
Lissa K. Valletta
2-3/T12
Poughkeepsie, NY 12601
(tie 293) 433-3102
From: François Bissey
To: xcat-user@lists.sourceforge.net
Date: 08/16/2012 11:27 PM
Subject:Re: [xcat-user] postscript not run after install?
On Thu, 16 Aug 2012 07:43:28 Lissa Valletta wrote:
> M
On Thu, 16 Aug 2012 07:43:28 Lissa Valletta wrote:
> Make sure syslog is setup to log to the Management Node from your node.
> Test with logger.
>
> On the Management Node tail -f /var/log/messages
> Run updatenode -V -P syslog
>
> Look for the below message in /var/log/messages. If this fai
.
Aug 16 07:27:47 xCAT: xCAT: Allowing getpostscript from
Lissa K. Valletta
2-3/T12
Poughkeepsie, NY 12601
(tie 293) 433-3102
From: François Bissey
To: xCAT Users Mailing list
Date: 08/15/2012 11:49 PM
Subject:Re: [xcat-user] postscript not run after install?
On Thu, 02 Aug
On Thu, 02 Aug 2012 14:51:05 Guang Cheng Li wrote:
> the run_ps() subroutine is not generated by /xcatpost/getpostscript.awk,
> you can see in the autoyast "Run xCAT post install" section that the run_ps
> is generated using the sed commands, might there be some problem when the "
> Run xCAT post i
M China System Technology Laboratory
Email: ligua...@cn.ibm.com
Address: Building 28, ZhongGuanCun Software Park,
No.8, Dong Bei Wang West Road, Haidian District Beijing 100193,
PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: François Bissey
To: xCAT Users Mailing list
Date:
On Wed, 01 Aug 2012 11:24:26 Guang Cheng Li wrote:
> The /xcatpost/mypostscript* are generated on the node on the fly, not
> copied from somewhere else.
>
> You can take a look at the autoyast file /install/autoinst/,
> specifically the section "Run xCAT post install", check if the env vars
> MAST
ct Beijing 100193,
PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: François Bissey
To: xCAT Users Mailing list
Date: 2012-08-01 08:04
Subject: Re: [xcat-user] postscript not run after install?
On Tue, 31 Jul 2012 15:54:26 Guang Cheng Li wrote:
> Does /xcatpost/mypostscript
On Wed, 01 Aug 2012 12:03:17 François Bissey wrote:
> On Tue, 31 Jul 2012 15:54:26 Guang Cheng Li wrote:
> > Does /xcatpost/mypostscript and /xcatpost/mypostscript.post look correct?
>
Actually I have files /xcatpost/mypostscript_ on aix nodes but not on
linux nodes. So it could just be a linux v
On Tue, 31 Jul 2012 15:54:26 Guang Cheng Li wrote:
> Does /xcatpost/mypostscript and /xcatpost/mypostscript.post look correct?
I don't see those files at all on the newly installed nodes. I don't see then
in my /install/postscripts folder on the xcat server eitheir which explains
why they haven'
st]#
Thanks,
---------------------
Li,Guang Cheng (李光成)
IBM China System Technology Laboratory
Email: ligua...@cn.ibm.com
Address: Building 28, ZhongGuanCun Software Park,
No.8, Dong Bei Wang West Road, Haidian District Beiji
I just tried with another node and a regular profile. This time
the postbootscript have run normally but not the postscripts.
/tmp/wget.log is full of package fetching info but /var/log/xcat
doesn't exist at all.
Francois
---
Not sure if the stuck postbootscript is the cause of the problem but
after a fresh re-instal the node lacks a file called /var/log/xcat/xcat.log and
in /tmp/wget.log contains the following insteresting bit:
--2012-07-26 15:41:34--
ftp://192.168.14.116/post/otherpkgs/gpfs_updates/*.rpm
On Thu, 26 Jul 2012 11:02:43 Guang Cheng Li wrote:
> Since you already ran updatenode, then everything in /tmp/wget.log
> and /var/log/xcat/xcat.log should already be right. Do we still have nodes
> that just finished the os installation and have not run updatenode?
> the /tmp/wget.log and /var/log
路8号中关村软件园28号楼
邮编: 100193
From: François Bissey
To: xcat-user@lists.sourceforge.net
Date: 2012-07-26 06:37
Subject:Re: [xcat-user] postscript not run after install?
On Wed, 25 Jul 2012 07:06:39 Lissa Valletta wrote:
> In fact make sure all files in the /install/postscri
On Wed, 25 Jul 2012 07:06:39 Lissa Valletta wrote:
> In fact make sure all files in the /install/postscripts directory and
> subdirectories are world readable. This can cause a failure that will
> show up in the wget.log that Guang Cheng Li asked for below.
> Thanks!
>
Ok I will give you a bi
: Lissa Valletta/Poughkeepsie/IBM@IBMUS
To: xCAT Users Mailing list
Cc: xCAT Users Mailing list
Date: 07/25/2012 07:03 AM
Subject:Re: [xcat-user] postscript not run after install?
Do the postscripts you added to /install/postscripts have the correct
permission. They must be
?
Lissa K. Valletta
2-3/T12
Poughkeepsie, NY 12601
(tie 293) 433-3102
From: Guang Cheng Li
To: xCAT Users Mailing list
Date: 07/25/2012 12:14 AM
Subject:Re: [xcat-user] postscript not run after install?
Before the postscripts are run, the postscripts need to be downloaded
100193,
PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: SYED ASIF ZAHEER
To: XCAT Help
Date: 2012-07-25 12:04
Subject:Re: [xcat-user] postscript not run after install?
did you add your script to run in postscripts table
tabedit postscripts
[root@xgplg ~]# tabdump
ervicenode,xcatserver,xcatclient",,,
"compute","script_filename.sh",,,
Regards
Syed Asif Zaheer
sa_zah...@hotmail.com
> Date: Wed, 25 Jul 2012 14:26:34 +1200
> From: francois.bis...@canterbury.ac.nz
> To: xcat-user@lists.sourceforge.net
> Subject: Re: [xcat-use
On Wed, 25 Jul 2012 10:16:40 Guang Cheng Li wrote:
> HI,
>
> A lot of reasons might cause postscripts could not be run successfully,
> like the compute node can not resolve the hostname of the management node.
> Try the following debug procedure:
>
> 1. Anything in /tmp/wget.log? is the node tryi
Bei Wang West Road, Haidian District Beijing 100193,
PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
From: François Bissey
To: xcat-user@lists.sourceforge.net
Date: 2012-07-25 09:52
Subject:[xcat-user] postscript not run after install?
Hi,
I am doing experiments on a test lpar before
Hi,
I am doing experiments on a test lpar before making a change to
our cluster and I am discovering that while the install proceed
normally the postbootscripts are run but the postscripts themselves
aren't.
I am trying to install SLES11.1 on a power7 lpar with xcat 2.6.11
(it was upgraded in pla
45 matches
Mail list logo
