Hi,
In general seaweed is thermodynamically very 'cold' and therefore hard to
digest. One way to obtain the minerals is to make a seaweed 'soup' by
letting it simmer in a kettle of water for awhile and the straining and
pouring the 'soup' into a hot bath. Sit in the bath for at least 1/2 hour.
It works very well. If you cannot do the body bath you can do a foot bath
but do it more often.
Don't throw out the seaweed it can be reboiled a couple of times. You can
even blend it after the second boil and then strain it.
PT
----- Original Message -----
From: "Dan Nave" <bhangcha...@gmail.com>
To: <silver-list@eskimo.com>
Sent: Thursday, May 27, 2010 10:54 AM
Subject: Re: CS>Electrolyte ratios and amounts
Tom,
Brooks Bradley has intimated that when supplementing minerals one
could end up by unbalancing the minerals in the body and recommended
taking large doses of kelp as a balanced supplement. Since I have
found that taking kelp gives me adverse side effects by way of my
intestinal system... I wanted to find a way to supplement the minerals
in another way.
My intent was to get a balanced amount of the various mineral elements.
Dan
On Wed, May 26, 2010 at 10:31 PM, poast <po...@prodigy.net> wrote:
Hello Dan,
While I don't know the exact ratio of the various electrolytes to use, I
would suggest using a conductivity meter to adjust amounts. Pick up some
"mineral" water and measure its conductivity. Then add your electrolytes
and try to come close to matching the conductivity of the "mineral" water.
My son was wanting to drink purified water. We started with distilled
water
and simply added some sea salt to it. I adjusted the amount to match the
conductivity of our tap water. While sea salt has some electrolyte
properties, I think you are looking for something a little stronger.
However you should get the idea behind this.
Tom
----- Original Message -----
From: "Dan Nave" <bhangcha...@gmail.com>
To: <silver-list@eskimo.com>
Sent: Wednesday, May 26, 2010 10:00 AM
Subject: CS>Electrolyte ratios and amounts
If one was to mix up a balanced set of electrolytes to add to
distilled water for drinking and cooking uses containing, perhaps,
bicarbonate of soda, magnesium chloride, and potassium chloride, what
ratios would one use, and how much total, say, per gallon?
Any thoughts?
Dan
--
The Silver List is a moderated forum for discussing Colloidal Silver.
Rules and Instructions: http://www.silverlist.org
Unsubscribe:
<mailto:silver-list-requ...@eskimo.com?subject=unsubscribe>
Archives:
http://www.mail-archive.com/silver-list@eskimo.com/maillist.html
Off-Topic discussions: <mailto:silver-off-topic-l...@eskimo.com>
List Owner: Mike Devour <mailto:mdev...@eskimo.com>
