I would not say new units shipping are okay was this info that was release by SB that in fact the new units shipping are okay and if so would there not be new firmware that works?? then if that were the case then they would pass the firmware to us which I don�t think has happened because I think your incorrect in saying the new units are working good???
I could be wrong SB any comments?? Thanks Quoting Gary Garrett <[EMAIL PROTECTED]>: > If I understand this correctly, The problem has been fixed. The new units are > shipping and working OK. > The problem here is some of us have deployed bad units from 1-2 months ago > that are giving us fits. > We reserve the right to piss and moan, but SB never would have got to where > they are if the stuff was just plain junk. > I would propose two options, low cost with SB and plan B with another vendor > and higher cost and let them decide. > Anyone care to comment about reliability in the last week shipments? We got > two bad units 2 weeks ago from EC. > > BTW, look at this graph now. RF is showing up again after the sun went down. > Sure looks like heat to me. > Rick, ramp up to build those shields, you could be the next Bill Gates. > > > Lancaster Networks wrote: > > > Hello, > > > > Ok, here's a jam now... > > > > I need to have a proposal ready for VP of a 786 employee ISP by > > Monday, and I can't screw this up! What equipment do you recommend? > > > > Looks like SB aren't a choice unless they get their problems fixed and > > stop testing them on consumers > > > > Sunday, July 20, 2003, 1:37:56 AM, you wrote: > > > > JH> Return-Path: <> > > JH> Received: from [66.150.163.162] (HELO m5) > > JH> by spamarrest.com (CommuniGate Pro SMTP 4.0.3) > > JH> with ESMTP id 10280714 for cbunting; Sat, 19 Jul 2003 23:05:08 > -0700 > > JH> Received: from part-15.org ([198.63.203.3]) > > JH> by mail.fission2.com (Merak 5.9.4) with SMTP id CPA74271 > > JH> for <[EMAIL PROTECTED]>; Sun, 20 Jul 2003 01:39:37 > -0400 > > JH> Received: from natasha.vircom.net [207.1.180.3] by pdqlink.com with > ESMTP > > JH> (SMTPD32-4.07) id AC902EC0122; Sun, 20 Jul 2003 00:45:52 CDT > > JH> Received: from rocky ([192.168.250.22]) > > JH> by natasha.vircom.net (8.11.6/8.11.6) with SMTP id > h6K5bwj09347 > > JH> for <[EMAIL PROTECTED]>; Sat, 19 Jul 2003 22:37:58 > -0700 > > JH> Message-ID: <[EMAIL PROTECTED]> > > JH> From: "John Hokenson" <[EMAIL PROTECTED]> > > JH> To: <[EMAIL PROTECTED]> > > JH> References: <[EMAIL PROTECTED]> > <[EMAIL PROTECTED]> > <[EMAIL PROTECTED]> > > JH> <[EMAIL PROTECTED]> > > JH> Date: Sat, 19 Jul 2003 22:37:56 -0700 > > JH> MIME-Version: 1.0 > > JH> Content-Type: text/plain; > > JH> charset="iso-8859-1" > > JH> Content-Transfer-Encoding: 7bit > > JH> X-Priority: 3 > > JH> X-MSMail-Priority: Normal > > JH> X-Mailer: Microsoft Outlook Express 6.00.2800.1106 > > JH> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 > > JH> Subject: Re: [smartBridges] Anyone having issues with the new > firmware? > > JH> Precedence: bulk > > JH> Sender: [EMAIL PROTECTED] > > JH> Reply-To: [EMAIL PROTECTED] > > > > JH> My rep at Tessco is making noises about dropping them. > > > > JH> JH > > JH> ----- Original Message ----- > > JH> From: "Ray" <[EMAIL PROTECTED]> > > JH> To: <[EMAIL PROTECTED]> > > JH> Sent: Saturday, July 19, 2003 9:10 PM > > JH> Subject: Re: [smartBridges] Anyone having issues with the new > firmware? > > > > >> My concern is that with all we've invested in these products (and I > really > > >> like them) distributors might start to drop them. Think about it, if > you > > >> were Ecomm would you want all this hassle? > > >> > > >> I would rather SB recall or at least put a hold on all shipments until > > JH> they > > >> get this issue fixed. I would rather use another CPE product that > works > > JH> so > > >> I don't look like a dumb a** to my clients by using beta products that > > >> simply aren't yet ready. > > >> > > >> I would switch back to SB as soon as the units are again working. > > >> > > >> Ray > > >> > > >> > > >> ----- Original Message ----- > > >> From: "Martin Moreno" <[EMAIL PROTECTED]> > > >> To: <[EMAIL PROTECTED]> > > >> Sent: Saturday, July 19, 2003 8:20 PM > > >> Subject: Re: [smartBridges] Anyone having issues with the new > firmware? > > >> > > >> > > >> > I would agree with that! > > >> > I did not catch what Dist they were getting them from? I get mine > from > > >> ECOMM > > >> > and they have been pretty good for the most part. I dont like the > idea > > JH> of > > >> > having a bad unit and they charge your card for the repalcement ahead > of > > >> time > > >> > then refund you when they get the non working one back??? Seems > > JH> backwards > > >> to me > > >> > I pitched a fit and got them to send me an APPO in advance exchange > liek > > >> their > > >> > warranty clearly states without being charged 1st then charge me if > I > > JH> dont > > >> send > > >> > it back within 10 days. This was after I ordered two new APPO's and > one > > JH> I > > >> > recieved was a used unit sent back for repair! > > >> > > > >> > > > >> > > > >> > Quoting Eje Gustafsson <[EMAIL PROTECTED]>: > > >> > > > >> > > shrug.. Now I am going to shock this entirely list by finally > agreeing > > >> > > with Chris.. Can't agree more with what you just said. > > >> > > > > >> > > If they all where bad out of the box or a lot of them where bad out > of > > >> > > the box it's the distributor/resellers problem not the > manufacturers > > >> > > if teh distributor or reseller don't want to work with you you > might > > >> > > try to resolve it with the manufacturer if someone gets sued it > should > > >> > > be the dist not the manufacturer. The manufacturer will not give you > a > > >> > > refund. They sold the unit for say $10 and you purchased it for > $20 > > >> > > from the dist so should the manufacturer give you a refund for $20 > and > > >> > > lose $10 ??? Come on I think not. If someone should give you a > refund > > >> > > it's the dist. However if the dist will not work it out then the > > >> > > manufacturer can give you a working replacement. > > >> > > > > >> > > Best regards, > > >> > > Eje Gustafsson mailto:[EMAIL PROTECTED] > > >> > > The Family Entertainment Network http://www.fament.com > > >> > > Phone : 620-231-7777 Fax : 620-231-4066 > > >> > > - Your Full Time Professionals - > > >> > > eBay UserID : macahan > > >> > > --- > > >> > > searchable smartBridges mailing list archive. > > >> > > http://www.mail-archive.com/smartbridges40part-15.org/ > > >> > > -- > > >> > > p> Ok T n T > > >> > > > > >> > > p> WOW Talk about a drastic calling for attention in my view, most > of > > >> the > > >> > > p> people on the board are working on resolving problems and your > > >> response > > >> > > toa > > >> > > p> firmware issue is that they are advertised as carrier class and > > JH> that > > >> > > they > > >> > > p> don't offer cash refunds? Umm does cisco or lucent? If so I'd > > JH> gladly > > >> like > > >> > > to > > >> > > p> get my money back on some AP1000's or CPE Ethernet Converters and > a > > >> few > > >> > > p> cisco 350's. A class action suit? Really I have yet to hear > anyone > > >> that > > >> > > is > > >> > > p> pissed at the fact that they only exchange units in a timely > manner > > >> and > > >> > > wont > > >> > > p> give them there cash back? Personally I don't recall many > groups > > JH> that > > >> > > will > > >> > > p> do cash refunds from the primary company isn't this a point to > deal > > >> with > > >> > > p> your SUPPLIER if you feel you need to return goods cause you > don't > > >> want > > >> > > p> them. > > >> > > > > >> > > p> As far as I can tell in the past SB has stood behind there > problems > > >> > > p> including phone calls from half way across the world at 10am to > > JH> help > > >> > > solve > > >> > > p> MANY users problems in a one on one basis, they take > suggestions > > JH> and > > >> work > > >> > > to > > >> > > p> help mold there product. Really you have invested 6,000$ wow I > have > > >> > > spent > > >> > > p> over 25,000 upgrading my network with SB's powering it and i > have > > JH> yet > > >> to > > >> > > p> find a reason to neglect the funds spent. > > >> > > > > >> > > > > >> > > p> AS A NOTE IT SAYS > > >> > > > > >> > > p> DOA Products must be returned in original condition, and the > return > > >> box > > >> > > must > > >> > > p> include all components and originally packaged with the > product, > > >> > > including > > >> > > p> cable, software, manual, etc. You must obtain an RMA number > before > > >> you > > >> > > p> return any defective or DOA products. > > >> > > > > >> > > p> REQUIRES ORIGINAL BOX ON DOA UNITS... DOA MEANS DEAD ON ARRIVAL > > JH> HENCE > > >> > > YOU > > >> > > p> JUST GOT IT SO THEY WANT IT BACK HOW THEY SENT IT SINCE IT WAS > DEAD > > >> AS > > >> > > SOON > > >> > > p> AS YOU GOT IT. > > >> > > > > >> > > p> As for the returning on a one to one basis it is not FINE PRINT > it > > JH> is > > >> > > p> blatantly shown in Standard Sized text under the warranty > > JH> conditions. > > >> > > Not > > >> > > p> like they used size 1 font to try to hide it from you. > > >> > > > > >> > > > > >> > > p> Sorry if I'm being a di*k but this is just my take on your > comment. > > >> > > > > >> > > p> Chris > > >> > > p> -----Original Message----- > > >> > > p> From: Tom & Toni Maris [mailto:[EMAIL PROTECTED] > > >> > > p> Sent: Saturday, July 19, 2003 10:44 PM > > >> > > p> To: [EMAIL PROTECTED] > > >> > > > > >> > > p> My husband Tom is very pissed. We have invested more than > > JH> $6,000.00 > > >> in > > >> > > this > > >> > > > > >> > > p> gear and we are constantly having prtoblems. > > >> > > p> On their web site thwy claim to be Carrier Class. Now we read > the > > >> fine > > >> > > print > > >> > > > > >> > > p> on the rmapage and it says they will not give refund just > > JH> replacement > > >> > > units > > >> > > p> and that you have to have the original box! > > >> > > p> Original box, replacement unit's, no refunds, Carrier class. > > >> > > p> This SmartBridges company certainly does not sound like an > honest > > >> > > company. > > >> > > p> First I would like to know where they get off saying anything > about > > >> > > Carrier > > >> > > p> class. > > >> > > p> Then if they are so sure about their Carrier class junk, why do > you > > >> need > > >> > > an > > >> > > p> original box to sned them back, and why don't they do refunds? > > >> > > > > >> > > p> Tom, has been talking about a lawsuite to make this Smartbridge > > >> company > > >> > > p> stand behind their products or give everyone their money back. > He > > >> thinks > > >> > > > > >> > > p> that their is probably enough people like us who got ripped off > to > > >> get a > > >> > > > > >> > > p> class action lawsuite against the company who sold us this pile > of > > >> junk > > >> > > > > >> > > p> Very very disapointed > > >> > > > > >> > > > > >> > > p> T n T > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > >>From: "Blazen Wireless" <[EMAIL PROTECTED]> > > >> > > >>Reply-To: [EMAIL PROTECTED] > > >> > > >>To: <[EMAIL PROTECTED]> > > >> > > >>Subject: Re: [smartBridges] Anyone having issues with the new > > >> firmware? > > >> > > >>Date: Sat, 19 Jul 2003 19:03:47 -0700 > > >> > > >> > > >> > > >>Okay so it appears I am not the only one having the problem here > We > > >> hav > > >> > > >>users at begining at 3.5 miles and some as far as 7.2 miles the > last > > >> > > >>revision 0.01.06 just will not associate to any of my APS I had > > >> sugested > > >> > > >>there is something going on here and I am finally able to get on > > JH> this > > >> > > list > > >> > > >>and post only to see what I have been telling support since last > > JH> week > > >> > > >>before > > >> > > >>the release only to be told its been working well in the "LAB" > > >> > > >> > > >> > > >>Here is my post from another forum these things need to be tested > in > > JH> a > > >> > > >>consistant manor not just really close up. > > >> > > >>1. Measure signal at 1, 2, 3, 4,5 ,6 and 7 miles if possible > > >> > > >>2. At each point do some speed tests to confirm it is working > and > > JH> how > > >> > > well > > >> > > >>or how bad as you can see at some ares out we get association > but > > >> speeds > > >> > > >>are > > >> > > >>WAY down. > > >> > > >>These are only 2 that need to be added to the list of testing > before > > >> ANY > > >> > > >>final revision is released to save time and nerves of those of us > in > > >> the > > >> > > >>field! > > >> > > >> > > >> > > >>I keep asking what is the closest and farthest they have been > tested > > >> in > > >> > > the > > >> > > >>"LAB" and I have yet to get an answer? is this something that is > a > > >> > > secret?? > > >> > > >>I too am not going to change firmware on the APPOS that are > working > > >> rock > > >> > > >>solid and have ALL my customers down. > > >> > > >> > > >> > > >> > > >> > > >> We have tried it (ver 0.01.06 rev 3 final release )and I have > seen > > >> > > >>problems > > >> > > >>but to be fair we still need to identify if this firmware is > > >> compatible > > >> > > >>with > > >> > > >>the OLD atmel chip they had. We tried this new firmware on the > only > > >> radio > > >> > > > > >> > > >>we > > >> > > >>have left since the other 2 locked up hardcore and are now > doorstops > > >> > > after > > >> > > >>doing firmware upgrades with rev 2 & rev 3 just before the final > > >> release. > > >> > > >> > > >> > > >>Here is what we found after 3 hours of testing and we found the > same > > >> > > thing > > >> > > >>on rev 2 > > >> > > >> > > >> > > >>I don't how you guys feel about it and maybe this firmware is > not > > >> > > >>compatible > > >> > > >>with the old good atmel chip per say. > > >> > > >>The two test radios that locked up we just bought less then a > month > > >> ago so > > >> > > > > >> > > >>I > > >> > > >>can only assume they had the problem. Unless they can come up with > a > > >> way > > >> > > to > > >> > > >>positively identify which units are suspect with the suspect > chip. > > >> > > >> > > >> > > >>I suggest you do the same tests with a spare radio that you can > > JH> afford > > >> to > > >> > > >>lose if the firmware upgrade goes bad. Basically what happens is > the > > >> > > radio > > >> > > >>locks up and it no longer gives an Ethernet connection to log > into > > JH> the > > >> > > >>radio, the power and wireless light stay on solid and you no > longer > > >> get a > > >> > > >>LAN connection or light many times I was told to reset and don't > see > > >> how > > >> > > >>that would work since that just resets passwords and the IP > address > > >> etc > > >> > > but > > >> > > >>I tried 20 times anyways they even sent me a utility to unlock > it > > JH> but > > >> > > that > > >> > > >>was useless because you need a network connection to the radio > > JH> hahaha. > > >> > > >> > > >> > > >>Anyways in a nut shell the firmware after testing as you can see > in > > >> our > > >> > > >>notes does not work for us yet Smart bridges claims it works well > in > > >> the > > >> > > >>lab > > >> > > >>and others have tested as well which I would like to know how > far > > JH> away > > >> > > they > > >> > > >>tested the radio. > > >> > > >> > > >> > > >>1. ver 0.01.04 loaded originally on this unit and at 3.5 miles > we > > >> > > associate > > >> > > >>fine and get download speeds in 900kbps to 1.2 megs > > >> > > >> > > >> > > >>2. Loaded ver 0.01.06 final rev into radio it loads fine and at > same > > >> 3.5 > > >> > > >>mile location we get not even half the speeds we did with rev > > JH> 0.01.04 > > >> we > > >> > > >>get > > >> > > >>200kbps to 300kbps at most and have lots of packet loss. > > >> > > >>RSSI 85% and signal quality 90-95% with both firmware. > > >> > > >> > > >> > > >>3. Moved to 5 mile location ran same speed tests with firmware > > JH> 0.01.04 > > >> > > get > > >> > > >>speeds of 800kbps consistently loaded ver 0.01.06 final revision > and > > >> we > > >> > > >>associate but thats it radio will not ping APPO on tower but we > can > > >> ping > > >> > > >>ABO > > >> > > >>radio with new firmware. RSSI 80% signal quality 80% with both > > >> firmware. > > >> > > >> > > >> > > >>So as you can see this firmware will not work for us. I don't > > >> understand > > >> > > >>what happened it seems that this is now possibly a timing issue? > > >> > > >> > > >> > > >>The only question I have is will version 0.01.06 work on old > radios > > >> with > > >> > > >>old > > >> > > >>atmel chip? and if not then we will proceed further to load the > > >> 0.01.06 > > >> > > on > > >> > > >>clients radios but once again we have no way of telling which > radios > > >> have > > >> > > >>new or old atmel chip? > > >> > > >> > > >> > > >>Our coverage area begins at 3.5 miles and runs > > >> > > >>out to 7.2 miles. > > >> > > >> > > >> > > >>----- Original Message ----- > > >> > > >>From: "Colorado Wisp" <[EMAIL PROTECTED]> > > >> > > >>To: <[EMAIL PROTECTED]> > > >> > > >>Sent: Saturday, July 19, 2003 1:18 PM > > >> > > >>Subject: RE: [smartBridges] Anyone having issues with the new > > >> firmware? > > >> > > >> > > >> > > >> > > >> > > >>Nish, > > >> > > >> > > >> > > >>We updated several of one of our "overheating" units this > morning > > JH> and > > >> it > > >> > > >>will not associate with our APs running 1.4j.5. We have no plans > to > > >> > > update > > >> > > >>the firmware on the APs, they have been rock solid. Is there > going > > JH> to > > >> be > > >> > > >>firmware that will interact this firmware version? > > >> > > >> > > >> > > >>Chris > > >> > > >> > > >> > > >>--- > > >> > > >>Colorado WISP llc. http://www.cowisp.net > > >> > > >>Bringing high speed internet to rural communities. > > >> > > >>P.O. Box 55 > > >> > > >>Wellington, Colorado 80549 > > >> > > >>970-218-5295 > > >> > > >> > > >> > > >> > > >> > > >>-----Original Message----- > > >> > > >>From: [EMAIL PROTECTED] > > >> > > >>[mailto:[EMAIL PROTECTED] > > >> > > >>On Behalf Of Nish Park > > >> > > >>Sent: Saturday, July 19, 2003 2:49 AM > > >> > > >>To: [EMAIL PROTECTED] > > >> > > >>Subject: RE: [smartBridges] Anyone having issues with the new > > >> firmware? > > >> > > >> > > >> > > >> > > >> > > >>Tim, > > >> > > >>Can you please elaborate a little more on this "still doing the > same > > >> > > >>thing!". What was the problem, new unit (June or July > purchase?), > > JH> RSSI > > >> > > and > > >> > > >>LQ values, Brand of AP? > > >> > > >> > > >> > > >>We have confirmed that the problem of loosing association at > > JH> elevated > > >> > > >>temperature has been solved. This has been the focus of all our > > >> efforts > > >> > > and > > >> > > >>we are quire confident that issue no longer exist. Now we will > be > > >> > > focusing > > >> > > >>on testing if there has been any other side effects. > > >> > > >> > > >> > > >> >From some of the emails it appears that some of you are trying > to > > >> see > > >> > > >> >if > > >> > > >>the new F/W also fixes the old/lingering problem of "periodic > > JH> lockup". > > >> I > > >> > > >>will be pleasantly surprised to hear that it does, but that has > not > > >> been > > >> > > >>the > > >> > > >>focus of the current activity on hand. > > >> > > >> > > >> > > >>Thanks for your support. > > >> > > >> > > >> > > >>Nish > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >>-----Original Message----- > > >> > > >>From: [EMAIL PROTECTED] > > >> > > >>[mailto:[EMAIL PROTECTED] > > >> > > >>On Behalf Of Tim Harris > > >> > > >>Sent: Saturday, July 19, 2003 12:32 PM > > >> > > >>To: '[EMAIL PROTECTED]' > > >> > > >>Subject: Re: [smartBridges] Anyone having issues with the new > > >> firmware? > > >> > > >> > > >> > > >>Yep, I installed it this afternoon on a client's unit. Had to > > JH> unplug > > >> it > > >> > > to > > >> > > >>get it to start working after uploading the new firmware. > Started > > >> > > working > > >> > > >>fine. > > >> > > >> > > >> > > >>Customer called back an hour later and left two messages, still > > JH> doing > > >> the > > >> > > >>same thing! > > >> > > >> > > >> > > >>If it smells like it, if it looks like it........ > > >> > > >> > > >> > > >>Hmm, maybe the guy with the Hotmail address might have a point. > > JH> This > > >> > > seems > > >> > > >>to be getting ridiculous. > > >> > > >> > > >> > > >>I'm doing two more tomorrow morning, I'll post a response then.. > > >> > > >> > > >> > > >> > > >> > > >>Tim Harris, Operations > > >> > > >>www.dwisp.net > > >> > > >>[EMAIL PROTECTED] > > >> > > >> > > >> > > >> > > >> > > >>----- Original Message ----- > > >> > > >>From: "Sam" <[EMAIL PROTECTED]> > > >> > > >>To: <[EMAIL PROTECTED]> > > >> > > >>Sent: Friday, July 18, 2003 10:09 AM > > >> > > >>Subject: [smartBridges] Anyone having issues with the new > firmware? > > >> > > >> > > >> > > >> > > >> > > >> > Has anyone installed the new firmware? I'm getting ready to > try, > > >> but > > >> > > >> > wanted to check first to see what sort of luck others have > had. > > >> > > >> > > > >> > > >> > Thanks > > >> > > >> > Sam > > >> > > >> > > > >> > > >> > > > >> > > >> > The PART-15.ORG smartBridges Discussion List > > >> > > >> > To Join: mailto:[EMAIL PROTECTED] (in the body type > subscribe > > >> > > >>smartBridges <yournickname> > > >> > > >> > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > >> unsubscribe > > >> > > >>smartBridges) > > >> > > >> > Archives: http://archives.part-15.org > > >> > > >> > > > >> > > >> > > >> > > >>The PART-15.ORG smartBridges Discussion List > > >> > > >>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> > > >>smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] > > JH> (in > > >> > > the > > >> > > >>body type unsubscribe > > >> > > >>smartBridges) > > >> > > >>Archives: http://archives.part-15.org > > >> > > >> > > >> > > >> > > >> > > >>The PART-15.ORG smartBridges Discussion List > > >> > > >>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> > > >>smartBridges <yournickname> To Remove: > mailto:[EMAIL PROTECTED] > > JH> (in > > >> > > the > > >> > > >>body type unsubscribe smartBridges) > > >> > > >>Archives: http://archives.part-15.org > > >> > > >> > > >> > > >>The PART-15.ORG smartBridges Discussion List > > >> > > >>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> > > >>smartBridges <yournickname> > > >> > > >>To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe > > >> > > >>smartBridges) > > >> > > >>Archives: http://archives.part-15.org > > >> > > >> > > >> > > >>The PART-15.ORG smartBridges Discussion List > > >> > > >>To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> > > >>smartBridges <yournickname> > > >> > > >>To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe > > >> > > >>smartBridges) > > >> > > >>Archives: http://archives.part-15.org > > >> > > > > >> > > p> > _________________________________________________________________ > > >> > > p> The new MSN 8: smart spam protection and 2 months FREE* > > >> > > p> http://join.msn.com/?page=features/junkmail > > >> > > > > >> > > p> The PART-15.ORG smartBridges Discussion List > > >> > > p> To Join: mailto:[EMAIL PROTECTED] (in the body type > subscribe > > >> > > p> smartBridges <yournickname> > > >> > > p> To Remove: mailto:[EMAIL PROTECTED] (in the body type > > JH> unsubscribe > > >> > > p> smartBridges) > > >> > > p> Archives: http://archives.part-15.org > > >> > > > > >> > > -- > > >> > > [This E-mail scanned for viruses by Declude Virus] > > >> > > > > >> > > The PART-15.ORG smartBridges Discussion List > > >> > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> smartBridges > > >> > > <yournickname> > > >> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > unsubscribe > > >> > > smartBridges) > > >> > > Archives: http://archives.part-15.org > > >> > > > > >> > > > >> > > > >> > Martin Moreno > > >> > Blazen Wireless > > >> > 909-907-4106 > > >> > www.blazenwireless.com > > >> > The PART-15.ORG smartBridges Discussion List > > >> > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > >> smartBridges <yournickname> > > >> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > >> smartBridges) > > >> > Archives: http://archives.part-15.org > > >> > > > >> > > >> > > >> --- > > >> Outgoing mail is certified Virus Free. > > >> Checked by AVG anti-virus system (http://www.grisoft.com). > > >> Version: 6.0.500 / Virus Database: 298 - Release Date: 7/11/2003 > > >> > > >> The PART-15.ORG smartBridges Discussion List > > >> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > JH> smartBridges <yournickname> > > >> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > > JH> smartBridges) > > >> Archives: http://archives.part-15.org > > > > JH> The PART-15.ORG smartBridges Discussion List > > JH> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > JH> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > JH> Archives: http://archives.part-15.org > > > > -- > > Best regards, > > Chris Bunting, MCSE > > President > > Cellular: 717-278-6639 > > Nextel ID: 196*50*18726 > > -------------------------------------------------------- > > Microsoft Certified Systems Engineer > > A+ Hardware Certification > > 3com NBX Certified Technician > > -------------------------------------------------------- > > Lancaster Networks > > 1085 Manheim Pike > > Lancaster PA 17601 > > 717-735-2279 > > www.lancasternetworks.com > > -------------------------------------------------------- > > > > NOTICE: This Email message and all attachments transmitted with it may > contain proprietary information intended solely for > > the use of the addressee. If the reader of this message is not the > intended recipient, you are hereby notified that any > > reading, dissemination, distribution, copying, or other use of this message > or its attachments is strictly prohibited. If > > you have received this message in error, please notify the sender > immediately by electronic mail at > > [EMAIL PROTECTED], and delete this message and all copies and backups > thereof. Thank you. > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > smartBridges <yournickname> > > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe > smartBridges) > > Archives: http://archives.part-15.org > Martin Moreno Blazen Wireless 909-907-4106 www.blazenwireless.com The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
