What is the max client associations on an APPO without comprimising the performance of the throughput? I have 1 APPO that has 35 clients on it, and 1 APPO that has only 5 clients... the lesser of the two can get 2 Mbps throuput, which is what we are feeding it from the backhaul, however on the APPO with 35 clients, the max throughput I can get is about 700 to 800 Kbps. The setup is as follows: 1 APPO --> .5 Watt Amp --> Splitter --> 2 - 120 degree sector antennas. 1 APPO --> 1 - 120 degree sector antenna
The APPO experiencing throughput problems it the one that has the splitter on it.. could this be causing the problem? We just purchased the WISP that setup the APPOs and I am not opposed to adding a 3rd APPO if that would be a viable solution, but I am concerned if 35 clients is going to hinder the performance that much. Thanks, Eric The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
