Hello Andy, I'm a bit late, but nice to hear that your problem is fixed now :). The Linux and Windows build were using exactly the same compound if I remember correctly, so I have no idea why it was broken on your side. Btw, I'm happy to hear that this little compound as been used in production. I only knew it has been extensively used at StereoD on Titanic3D and Abraham Lincoln: Vampire Hunter for bubbles and atmospheric dust effects. It is not always easy to tweak but I remember that the offset parameter was extremely important and needed to be changed based on the BBox size of your point cloud. Also, this algorithm was first designed for incompressible fluid effect. There is a mode to use it as a force (to use it in a classic Euler integration), but of course the curl motion won't always be there in this case. But playing with the various parameters can gives some nice results sometime :). I'm curious to know if other people used it in production!
Cheers, Guillaume On Tue, Nov 13, 2012 at 7:22 AM, Andy Nicholas <a...@andynicholas.com>wrote: > Sure thing. It's attached. > > Yep, for some reason the version of the compound included with our current > install of XSI is broken, but Michal's version works fine. > > It's awesome to finally have this set up working, I can see me using it > all the > time. Thanks for everyone's help. > > Cheers, > A > > > > On 12 November 2012 at 23:50 Byungchul Kang <k...@cgndev.com> wrote: > > > > could you forward the full compound of Michal Doniec? I want that, too. > > Thanks > > > > Kang > > > > 나의 iPad에서 보냄 Sent from my iPad > > > > > > 2012. 11. 13. 오전 7:44 Andy Nicholas <a...@andynicholas.com> 작성: > > > > > > > > > > Thanks for your help guys. Michal Doniec also sent me a full > compound > > > > as well as a screen shot of how everything should be connected. > So > > > > all that as well as your suggestions should be enough to go on, > I'll > > > > check it all out tomorrow. > > > > > > Thanks again! > > > Andy > > > > > > > > > On 12 Nov 2012, at 18:49, Rob Chapman wrote: > > > > > > > > > > > > think you have to have it connected AND setup properly > to see > > > > > > it working. depends if you are moving as forces or as > > > > > > postions as well. Ive used it a lot and highly > recommend it. > > > > > > also if you do Get>ICE|>get bubbles an ICE tree > compound is > > > > > > made with the curl noise framework correctly set up > inside > > > > > > already > > > > hope that helps! > > > > > > > > > > > > > > > > On 12 November 2012 18:36, Ciaran Moloney > > > > <moloney.cia...@gmail.com> wrote: > > > > > > > > Used it on a few jobs. It's great! Sorry, that's > not > > > > > > > > helpful at all. Also, no disconnected nodes here > when I > > > > > > > > do a simple d&d from the preset browser. 2012 or > 13? > > > > > > > > > > > > > > > On Mon, Nov 12, 2012 at 6:26 PM, Andy Nicholas > > > > > <a...@andynicholas.com> wrote: > > > > > > > > > > Hi guys, > > > > > > Has anyone managed to get the Curl Noise Framework > > > > > > compound working? I had a > > > > > > look inside it and there are a whole load of > disconnected > > > > > > nodes. It looks like > > > > > > it was exported without the "Embed internal > compounds" > > > > > > flag ticked (always a BIG > > > > > > mistake!) and is missing a compound that it relied > on. > > > > > > > > > > > > Having said that, I just checked the XML of the > compound > > > > > > and all the nodes > > > > > > mentioned in it are instantiated in the compound. > It's as > > > > > > if it was exported > > > > > > incorrectly at Autodesk's end. > > > > > > > > > > > > If anyone knows how to get it working, or can give > me a > > > > > > couple of pointers as to > > > > > > what needs to be plugged in to what, I'd be super > > > > > > appreciative. > > > > > > > > > > > > Thanks, > > > > > > Andy > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >