As I was searching in NFPA codes, I noticed that there are not that
much information about hose reels. Can we use 1 in. semi rigid hose on
hose reels instead of lay flat hoses in occupancies required 1 1/2 hose
stations? Because using a hose reel is much more easier for occupants, Is
there any guide when I can use hose reels instead of lay flat hoses?
What about minimum pressure requirements? As per NFPA-14 residual
pressure should be 65 psi at the outlet of the hydraulically most remote 1
1/2 in. hose station, but as per my experience hose reels need lower
pressure to work fine in comparison with lay flat hoses. Do I need 65
psi pressure even if I use hose reels?
The reason I am asking this question is that in a combined system, as
my standpipe system needs much more pressure than my sprinkler system,
if I can reduce my standpipe required pressure using hose reels I can
save much in selection of smaller fire pump & water tank, but I am not
sure if I am allowed.
I was checking a hose reel manufacture data sheets and I noticed that
a 1 in. hose reel in 45 psi pressure flow is 21 Gpm with throw
distance of 40 ft. Isn't it enough for a occupant use? am I allowed to design
based on 45 psi instead of 65 psi in 1 1/2 in outlets while I am using
hose reels?
Thanks,
Reza
---------------------------------
Never miss a thing. Make Yahoo your homepage.
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/mailman/listinfo/sprinklerforum
To Unsubscribe, send an email to:[EMAIL PROTECTED]
(Put the word unsubscribe in the subject field)