The covering was intended to help prevent fires from exposure to direct 
ignition sources like cigarettes.  Polyurethane foam degrades at around 600F 
and the flashpoint of the foam is still somewhere near or slightly above 200F 
so the fire resistant covering isn't going to change the combustion properties 
of the underlying foam material.  So from a fire scenario standpoint, it's an 
unknown just what delay the covering would really have against fire.  But heat 
is heat, when the fire gets to a certain temperature, the foam is going to 
either ignite or the pile collapse.


Craig L. Prahl, CET   
Fire Protection Specialist
Mechanical Department
CH2MHILL
Lockwood Greene
1500 International Drive
PO Box 491, Spartanburg, SC  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
[email protected]
http://www.ch2m.com 


-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of George Church
Sent: Monday, February 08, 2010 4:01 PM
To: [email protected]
Subject: L'il Abner-Mattress Tester

Back in 2007 the CPSC required a fire-resistant outer (fabric) shell on all 
mattresses and box springs for sale in the USA.

Is anyone familiar with this to be able to tell if this reduces the hazardous 
classification of the foam when stored in a retail store stockroom to 12' high? 
Stored on floor, flat, as if prepared for a princess and a pea.

Owner would prefer not to take .2/1500 to .6 for obvious reasons, one being 
tenant fitout of a portion of an existing retail center.

George Church
Rowe Sprinkler 


_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to