In my slash and burn days I left the JP off a pump installation, trying to make 
$ for my boss. We ended up putting one on later cause the pump would start. It 
wasn't tied in to central station, so it didn't bother the FD, but it would get 
warm if it happened at night- cause it ran till the AM. They did tie in to 
central station after a fire started and just one CSC 17/3-286 Model A from 
1985 +/- saved a large mfg plant (EX HAZ 2 occupancy) so we're glad the right 
stuff was there- and that the SSU did its job. Cause otherwise we'd have had 
some liability issues to deal with, having installed orig system in 1985 
(predecessor corp), just re=packed the pump after a long run, and added 
sprinklered 4 new plant expansion.

After the fire they thought they turned off the spkr system by pushing the OFF 
button on the fire pump. I happened by shortly afterward and found 55 Psi from 
city still coming outa the head.

George Church'
Rowe Sprinkler
[email protected]
570-837-7647

-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of 
[email protected]
Sent: Tuesday, December 07, 2010 9:09 AM
To: [email protected]
Subject: RE: High Rise Office Jockey pump

The same way it's done on any other project where there is no JP, from the fire 
loop.

Plus there is a Fire pump and JP on the fire main.  

Anyway,  I am leaving the JP in the package.

Craig L. Prahl, CET   
Fire Protection 
CH2MHILL
Lockwood Greene
1500 International Drive
Spartanburg, SCĀ  29304-0491
Direct - 864.599.4102
Fax - 864.599.8439
CH2MHILL Extension  74102
[email protected]



-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Mark.Phelps
Sent: Tuesday, December 07, 2010 8:42 AM
To: '[email protected]'
Subject: Re: High Rise Office Jockey pump

How do you fill the systems without a JP?

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum

For Technical Assistance, send an email to: [email protected]

To Unsubscribe, send an email to:[email protected]
(Put the word unsubscribe in the subject field)

Reply via email to