And the later NFPA 20 code requires 'dedicated' rated room for pumps- Ron will say REFERENCE!!!- but I do not think it is going to come to that :)
-----Original Message----- From: Joel Chaim [mailto:[email protected]] Sent: Monday, April 04, 2011 1:08 PM To: [email protected] Subject: RE: Design solution needed According to the GC it will be a $70,000.00 job, I am trying to get him to do the bigger service because in that 4000 sq. ft. area there is not much room to place tanks From: [email protected] [mailto:[email protected]] On Behalf Of Matthew J. Willis Sent: Monday, April 04, 2011 1:49 PM To: [email protected] Subject: RE: Design solution needed .I can't imagine where tap fees, road openings, trenching > >and permits can cost more, so it must be delay penalties. > > Some jurisdictions have "imact fees" for taps. I remember one where an 1.5 costs almost $8000.00. A 10" was like $80,000,00. This is just for the tap. Running the pipe in the same location will still be like running new I would think. You still have to dig the area for deadmen and thrust blocks and the like. R/ Matt Matthew J. Willis Automatic Fire Sprinklers Norred Fire Systems L.L.C. 318-387-1134 Voice 318-816-1087 Mobile 318-387-1163 Facsimile [email protected] _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _____ No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1209 / Virus Database: 1500/3549 - Release Date: 04/04/11 _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field) _______________________________________________ Sprinklerforum mailing list [email protected] http://fireball.firesprinkler.org/mailman/listinfo/sprinklerforum For Technical Assistance, send an email to: [email protected] To Unsubscribe, send an email to:[email protected] (Put the word unsubscribe in the subject field)
