Guyz/Gals:
I know that, at one time, there was a 'blurb' about sprinkler protection over swimming pool areas. We have just spent a fairly significant amount of time looking for the 'requirement' in recent editions of 13 - and have been unable to find a specific citation. Aside from "all areas are required to be sprinklered..." can anyone assist us with a specific reference to swimming pool areas (hotel/motels, et al) - in any Code - needing to be sprinkler protected. I remember reading about the possibility of the pool being emptied and the pool itself and/or surrounding areas being used for 'storage' of combustible materials, but that was years ago... Any assistance will be much appreciated - we are performing a third-party review and our PE/FPE is stuck. Regards to All. Gracias!! Jerry [email protected] Jerry D. Watts, SFPE President & Co-Founder ACCENT FIRE ENGINEERING INT'L. Ltd. Santa Fe, New Mexico USA -----Original Message----- From: Brian Harris <[email protected]> To: sprinklerforum <[email protected]> Sent: Wed, Jan 22, 2014 3:09 pm Subject: RE: Reusing Heads Thanks! Brian Harris, CET BVS Systems Inc. bvssytemsinc.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steve Leyton Sent: Wednesday, January 22, 2014 12:34 PM To: [email protected] Subject: RE: Reusing Heads It's also in NFPA 25 for good measure. Steve Leyton -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Morey, Mike Sent: Wednesday, January 22, 2014 9:25 AM To: [email protected] Subject: RE: Reusing Heads In 2013 6.2.1 (and added clarification in section 6.2.1.1) Mike Morey, CFPS, SET Planner Scheduler/Designer BMWC Constructors, Inc. 1740 W. Michigan St, Indianapolis, IN 46222 O: 317.651.0596 | C: 317.586.8111 [email protected] | www.bmwc.com ________________________________________ From: [email protected] [[email protected]] on behalf of Brian Harris [[email protected]] Sent: Wednesday, January 22, 2014 12:17 PM To: [email protected] Subject: Reusing Heads I know I've seen it somewhere but can someone point me to the section of NFPA-13 that says once you remove a head you have to replace it with a new one? Brian Harris, CET BVS Systems Inc. Sprinkler Division bvssystemsinc.com<http://bvssystemsinc.com/> Phone: 704.896.9989 Fax: 704.896.1935 _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler .org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler .org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
