could it be possible to like if running CW with a logger like N1MM+ if
you need to make a repeat, be able to hit a "F" Key to send whatever is
needed to be repeated?
Joe WB9SBD
Sig
The Original Rolling Ball Clock
Idle Tyme
Idle-Tyme.com
http://www.idle-tyme.com
On 5/9/2019 8:28 AM, Drew White wrote:
Several times the other station failed to receive my RR73. I
addressed this problem by clicking the TX5 radio button then [Enable
TX] to send the 73 message. That worked.
I think it would be helpful for the called station to return a 73
message in response my RR73. As things are now, if I received nothing
after sending RR73, I do not know if the other station received my
RR73 or if I could no longer copy the other station due to band
conditions or QRM. If the other station started a new CQ, I took that
as confirmation.
I worked 47 in the mock contest. I was surprised at the number of
times a station that responded to my CQ on my frequency failed to move
frequency at the end of the exchange. I also discovered that when two
or more stations answered my CQ, all but the first station I answered
were generally gone by the time I called them. I transmitted the
"TU;..." a couple times, but it never resulted in a contact. I gave
up trying to grab the second caller.
It was a fun contest. For me, logging worked without any problems. In
fact, RC5 worked perfectly.
Drew K9CW
On 5/8/2019 10:44 PM, Ray Rocker wrote:
On Wed, May 8, 2019 at 10:21 PM Gary - K7EK via wsjt-devel
<[email protected]> wrote:
On multiple occasions the other station failed to receive my RR73
and kept sending his exchange over and over. Unfortunately there was
no timely method to requeue an exchange with RR73. This lost more
contacts and appeared to confuse the autosequencer. I am very sure
that I had set things up precisely as stated in the various emails.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
