Hi Bill, Will this fix solve the problem I reported yesterday with OS Big Sur? I’ll repost below in case you didn’t see it.
Thanks, John WA1EAZ Repost - some additions in red: John & Joe, I had been using the previous version successfully on a MacBook Pro (Intel not M1) OS Big Sur 11.2.2. Today, I downloaded Mac version 2.4.0-rc2. When running Q65, T/R = 30 seconds, Submode A, the program continues to transmit after the 30 second period is complete for 60 seconds total. However, it does not seem to drive my amplifier after 30 seconds. [PTT is activated for the second 30 seconds, but no audio to drive the amp.] I have since tried FT8 on WSJT-X and can confirm that it works as usual. Thus, the problem seems to be isolated to Q65. I did follow the instructions in the Readme file. If there is a file I can send you, please let me know. I would appreciate any suggestions you can provide. Best 73, John WA1EAZ > On Mar 6, 2021, at 5:55 AM, Bill Somerville <g4...@classdesign.com> wrote: > > Hi Dave and Kevin, > > we have finally tracked down the cause of this crash, thanks for your > patience it was not so easy to track down. It is repaired for the next > release, for now if you do not use of the Q65_Sync Wide Graph synchronization > plot the crash will be avoided. Note this is not a Mac specific issue > although it does seem to have the most severe effects on that platform. > > 73 > Bill > G4WJS. > > On 06/03/2021 03:59, David Schmocker wrote: >> Hello all, >> >> A second report that mirrors this one: WSJT-X 2.4.0rc2 >> >> OS 10.14.6, Mac Mini >> >> Mode Q65, Waterfall Q65_ Sync selected and slow to let go of PTT line to >> K3S radio (even after Tx period). (when I go into Radio Panel, the Test >> PTT Red bar stays on, won't easily release). >> >> Then when a decode should take place, I get a crash exactly as Kevin >> reported with the same exact message as reported below. >> >> Thank you, 73, >> >> Dave KJ9I >> >> >> >> On 3/5/21, 8:47 PM, "Kevin McQuiggin"<mcqui...@sfu.ca> wrote: >> >> Hi All: >> I tried submitting this earlier today, but it didn’t seem to make to the >> list. Hence, a re-submission: >> >> Just trying out RC2 on an iMac, MacOS version 10.14.6 Mojave. >> >> Selection of “Q65_Sync” from dropdown box on the wide graph causes a >> crash as soon as the application starts to TX. Selection of “Cumulative” >> (the default) and TX/RX are normal. >> >> Specific exception was "EXC_BAD_ACCESS (SIGSEGV)”. >> >> I have saved the crash dump and can provide as necessary. >> >> 73, >> >> Kevin VE7ZD > > > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
