Tue, 20 Jul 2021 06:18:13 +0000 Conrad PA5Y via wsjt-devel <[email protected]> kirjoitti:
> Hello Jarno. I use an RX/TX sequencer. When I TX the station > controller/ sequencer takes input from a footswitch (for SSB), WSJT-X > via a com port to gnd to TX or a Winkeyer. The sequencer is as > follows. Relay is energised on RX. > > 1. RX/TX masthead relay > 2. LNA power > 3. Transverter (if used) > 4. PA PTT > 5. Radio TX > > This way when I TX all bands LNAs are protected. I only operate on > 6m, 4m,2m, 70cms and 23cms. I can also individually switch the relays > and LNA voltage off. I run EME on 2m and (soon) 70cms so it is > important to provide this level of protection. > > I have no RS232 from the sequencer on GND on TX so I use the SS > input. I had misunderstood the modulation source settings, now all is > working as expected. > > 73 > > Conrad PA5Y Hi Ok, I didn't figure your purpose... I'm using mostly on HF, try to get ES now on 6m, but that's highest... Anyway, good to get things working... Jarmo _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
