I made a few minor corrections to draft 1 and draft 2 is available at https://tinyurl.com/2s3drdra
For those that don't wish to follow links I have reproduced the conclusions and the proposal below. I don't have the skill or knowledge to code this but I am willing to test if anyone else decides it is worth coding. I am also willing to update the user guide if the proposal is adopted. Initial conclusions: RX frequency recoded in ALL.TXT may be misleading unless the rig dial frequency is set by WSJT-X. RX frequency reported by PSK Reporter may be misleading unless the rig dial frequency is set by WSJT-X. Logged QSO frequency appears to be correct regardless of the method used to set rig frequency. Even if the rig frequency is set by WSJT-X the frequency display will be amber on red if there is no matching frequency in the loaded table. Proposal: It is likely that many HF operators will like to tune to a DXpedition using any of the rig tuning methods a) through e) described above [see draft for details]. Sometimes the DXpedition will not be on a published frequency and there will have been no opportunity to edit the frequency table before attempting a QSO. To remove the possibility of misleading ALL.TXT and PSK Reporter frequencies the operator should have the option to designate the current dial frequency as the reporting frequency. New option Settings/General/Behavior - Use dial frequency for reporting When this option is selected: 1. RX frequency recorded in ALL.TXT shall be displayed dial frequency 1. Frequencies reported to PSK Reporter shall be derived from displayed dial frequency. 1. The dial frequency display shall be amber on black with no consideration given to matching the loaded frequency table. 73, Andy, k3wyc
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel