Switch to 10mbps to prove or disprove On Jul 23, 2015 4:16 PM, "Jaime Solorza" <losguyswirel...@gmail.com> wrote:
> Ethernet cable > On Jul 23, 2015 3:15 PM, "Craig House" <cr...@totalhighspeed.net> wrote: > >> We have another tower that we have installed 900 FSK equipment on that >> seems to be causing problems with a 2 way repeater system. The noise floor >> on the 2 way system is 20 db higher when the equipment is on. The down >> side to this is the tower owner is the repeater owner and without his >> repeater his business suffers and the need for the tower is gone. We have >> in the past had this issue and ran coax all the way up the tower to have >> only the antennas on top and it solved this issue but I dont want to do >> this for a FSK 900 radio? So my question would be, what are the odds that >> the new 450 900 mhz that is only moments away from being released would >> work without running Coax up the tower? I think this is an issue with the >> processor in the FSK board not the RF @ 900mhz that is causing the >> problem. What have others done about this. We have another tower that >> seems to be on the brink of this same issue as well and I dont want to >> completely pull off all 900 FSK but maybe I should? Should I just go to >> UBNT 900 until the 450's release? >> >>