Yeah.....I was wondering if it's 450mhz or thereabouts
On 7/23/2015 5:41 PM, Work wrote:
Is the two way system on a really low band that would be a harmonic of
the frequency that you're on right now?
—
Sent from Mailbox <https://www.dropbox.com/mailbox>
On Thu, Jul 23, 2015 at 5:15 PM, Craig House <cr...@totalhighspeed.net
<mailto:cr...@totalhighspeed.net>> wrote:
We have another tower that we have installed 900 FSK equipment on
that seems to be causing problems with a 2 way repeater system.
The noise floor on the 2 way system is 20 db higher when the
equipment is on. The down side to this is the tower owner is the
repeater owner and without his repeater his business suffers and
the need for the tower is gone. We have in the past had this issue
and ran coax all the way up the tower to have only the antennas on
top and it solved this issue but I dont want to do this for a FSK
900 radio? So my question would be, what are the odds that the new
450 900 mhz that is only moments away from being released would
work without running Coax up the tower? I think this is an issue
with the processor in the FSK board not the RF @ 900mhz that is
causing the problem. What have others done about this. We have
another tower that seems to be on the brink of this same issue as
well and I dont want to completely pull off all 900 FSK but maybe
I should? Should I just go to UBNT 900 until the 450's release?
