I think they said 152.x mhz I could check but if it's harmonics we are screwed for 900mhz no matter what
Sent from my iPhone > On Jul 23, 2015, at 16:48, Adam Moffett <dmmoff...@gmail.com> wrote: > > Yeah.....I was wondering if it's 450mhz or thereabouts > >> On 7/23/2015 5:41 PM, Work wrote: >> Is the two way system on a really low band that would be a harmonic of the >> frequency that you're on right now? >> >> >> — >> Sent from Mailbox >> >> >>> On Thu, Jul 23, 2015 at 5:15 PM, Craig House <cr...@totalhighspeed.net> >>> wrote: >>> We have another tower that we have installed 900 FSK equipment on that >>> seems to be causing problems with a 2 way repeater system. The noise floor >>> on the 2 way system is 20 db higher when the equipment is on. The down side >>> to this is the tower owner is the repeater owner and without his repeater >>> his business suffers and the need for the tower is gone. We have in the >>> past had this issue and ran coax all the way up the tower to have only the >>> antennas on top and it solved this issue but I dont want to do this for a >>> FSK 900 radio? So my question would be, what are the odds that the new 450 >>> 900 mhz that is only moments away from being released would work without >>> running Coax up the tower? I think this is an issue with the processor in >>> the FSK board not the RF @ 900mhz that is causing the problem. What have >>> others done about this. We have another tower that seems to be on the brink >>> of this same issue as well and I dont want to completely pull off all 900 >>> FSK but maybe I should? Should I just go to UBNT 900 until the 450's >>> release? >>> >> >