Is the two way system on a really low band that would be a harmonic of the frequency that you're on right now?
— Sent from Mailbox On Thu, Jul 23, 2015 at 5:15 PM, Craig House <cr...@totalhighspeed.net> wrote: > We have another tower that we have installed 900 FSK equipment on that seems > to be causing problems with a 2 way repeater system. The noise floor on the > 2 way system is 20 db higher when the equipment is on. The down side to this > is the tower owner is the repeater owner and without his repeater his > business suffers and the need for the tower is gone. We have in the past had > this issue and ran coax all the way up the tower to have only the antennas on > top and it solved this issue but I dont want to do this for a FSK 900 radio? > So my question would be, what are the odds that the new 450 900 mhz that is > only moments away from being released would work without running Coax up the > tower? I think this is an issue with the processor in the FSK board not the > RF @ 900mhz that is causing the problem. What have others done about this. > We have another tower that seems to be on the brink of this same issue as > well and I dont want to completely pull off all 900 FSK but maybe I should? > Should I just go to UBNT 900 until the 450's release?