I wonder if this unit is capable of doing gigabit with 450i? It does gigabit on the ePMP.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Oct 28, 2015 at 5:36 PM, Matt <matt.mailingli...@gmail.com> wrote: > > I have a PacketFlux SyncInjector Gigabit that goes to the 450i. It's > got a > > 48v power supply. There is no syncpipe, nor would anything work in the > lab. > > The test PC has two Intel gigabit NICs. > > > > My issue is that I can only get a 100 Mbit here. > > > > I have it set to generate sync right now and I can access it just fine. > If > > I have it set for autosync + free run I get some problems accessing the > > device (ping works for a few seconds on, then off, web interface is not > > responsive at all, CNUT flat out doesn't work). The ethernet link does > not > > go down/up with sync at all. > > > > Any other clues or things to look at? > > FYI, I am seeing same thing. It passes through a GigE-APC-HV on way > to 450i AP. AP is getting sync from daisy chained syncpipe source > hooked too Gigabit SyncInjector powered by 48 volt. AP is working > fine just at 100mbps ethernet. >
