Stupid question.... Does the 450i have this like 13.x on the regular
450? Default is auto 100f/100h/10f/10h.
On 10/28/2015 4:37 PM, Josh Luthman wrote:
I wonder if this unit is capable of doing gigabit with 450i? It does
gigabit on the ePMP.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Wed, Oct 28, 2015 at 5:36 PM, Matt <matt.mailingli...@gmail.com
<mailto:matt.mailingli...@gmail.com>> wrote:
> I have a PacketFlux SyncInjector Gigabit that goes to the 450i. It's got
a
> 48v power supply. There is no syncpipe, nor would anything work
in the lab.
> The test PC has two Intel gigabit NICs.
>
> My issue is that I can only get a 100 Mbit here.
>
> I have it set to generate sync right now and I can access it
just fine. If
> I have it set for autosync + free run I get some problems
accessing the
> device (ping works for a few seconds on, then off, web interface
is not
> responsive at all, CNUT flat out doesn't work). The ethernet
link does not
> go down/up with sync at all.
>
> Any other clues or things to look at?
FYI, I am seeing same thing. It passes through a GigE-APC-HV on way
to 450i AP. AP is getting sync from daisy chained syncpipe source
hooked too Gigabit SyncInjector powered by 48 volt. AP is working
fine just at 100mbps ethernet.
