10 years of DotA has helped me learn more Spanish than any high school class ever did. And Russian.
Chris Wright Network Administrator Velociter Wireless 209-838-1221 x115 From: Af [mailto:[email protected]] On Behalf Of Jaime Solorza Sent: Monday, May 16, 2016 6:37 AM To: Animal Farm Subject: Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik Yep...but most would just say "mierda" in disgust On May 16, 2016 5:27 AM, "Gino Villarini" <[email protected]<mailto:[email protected]>> wrote: pedazo de mierda is more accurate On Sun, May 15, 2016 at 11:46 AM, Josh Reynolds <[email protected]<mailto:[email protected]>> wrote: Woahhhhh there are kids here, watch the language! ;) On May 15, 2016 10:41 AM, "Jaime Solorza" <[email protected]<mailto:[email protected]>> wrote: Orale On May 15, 2016 9:36 AM, "Faisal Imtiaz" <[email protected]<mailto:[email protected]>> wrote: hehe.. yes I know.. I guess these are the nuances between Cuban Spanish / Puerto Rican Spanish and Mexican Spanish... There was another Cuban Spanish phrase I could have used, but it would not have been appropriate for the list :) All of them are terms of endearment ! (not ! ) :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232<tel:305%20663%205518%20x%20232> Help-desk: (305)663-5518<tel:%28305%29663-5518> Option 2 or Email: [email protected]<mailto:[email protected]> ________________________________ From: "Jaime Solorza" <[email protected]<mailto:[email protected]>> To: "Animal Farm" <[email protected]<mailto:[email protected]>> Sent: Sunday, May 15, 2016 11:08:41 AM Subject: Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik Careful!!!!....como...can also be " I eat".... ...here is a better translation... "mikrotik vale madre......" On May 15, 2016 8:53 AM, "Faisal Imtiaz" <[email protected]<mailto:[email protected]>> wrote: loose translation .... 'como mierada' ! :) Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232<tel:305%20663%205518%20x%20232> Help-desk: (305)663-5518<tel:%28305%29663-5518> Option 2 or Email: [email protected]<mailto:[email protected]> ________________________________ From: "Jaime Solorza" <[email protected]<mailto:[email protected]>> To: "Animal Farm" <[email protected]<mailto:[email protected]>> Sent: Sunday, May 15, 2016 10:36:02 AM Subject: Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik ...mikrotik POS? Piece of Salmon, point of sale, phaser on stun??? On May 15, 2016 7:34 AM, "Gino Villarini" <[email protected]<mailto:[email protected]>> wrote: faisal, thanks. I read this today, but we already fixed the issue by replacing the mikrotik POS with a Juniper SRX100 unit... problem solved! Thanks to all! On Fri, May 13, 2016 at 9:25 AM, Faisal Imtiaz <[email protected]<mailto:[email protected]>> wrote: Which model CCR are you using ? Pay attention to the ports you are using on that CCR due to how they are connected to the switch chip/CPU. e.g. on CCR 1008, don't use the 1st 4 ports (they are all on a switch chip with a 1g connection to the CPU, so with nat the packets can be hitting the CPU multiple times... if that does not work... then ......Just for kicks.... try the following:- Do the tests with one change at a time. -------------------- make sure you are on the latest 6.35.2 ROS and routerboard firmware is up to date. 1) Turn off connection tracking. 2) change the interface queue to multi-queue- ethernet (reboot required) 3) make sure flow control on the ports to the Radio are on. 4) put a simple queue for the desired BW on the CCR. ------------------- Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232<tel:305%20663%205518%20x%20232> Help-desk: (305)663-5518<tel:%28305%29663-5518> Option 2 or Email: [email protected]<mailto:[email protected]> ________________________________ From: "Gino Villarini" <[email protected]<mailto:[email protected]>> To: "Animal Farm" <[email protected]<mailto:[email protected]>> Sent: Friday, May 13, 2016 9:01:22 AM Subject: Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik yes, using fiber, same issue On Thu, May 12, 2016 at 4:35 PM, [email protected]<mailto:[email protected]> <[email protected]<mailto:[email protected]>> wrote: Did you check for duplex mismatch? On Thu, May 12, 2016 at 3:51 PM, Gino Villarini <[email protected]<mailto:[email protected]>> wrote: laptop direct to mimosa has no issue Get Outlook for iOS<https://aka.ms/o0ukef> On Thu, May 12, 2016 at 12:47 PM -0700, "Jason Wilson" <[email protected]<mailto:[email protected]>> wrote: Rory had that issue with SME if the mimosa ptmp the CPU in the laptop was maxing out. On May 12, 2016 11:39 AM, "Josh Reynolds" <[email protected]<mailto:[email protected]>> wrote: http://wiki.mikrotik.com/wiki/Manual:Wiki/Fasttrack#Description On Thu, May 12, 2016 at 1:37 PM, Josh Reynolds <[email protected]<mailto:[email protected]>> wrote: > I don't know much about the CCRs. Do they have FastPath and FastTrack > enabled by default? > > On Thu, May 12, 2016 at 1:33 PM, Gino Villarini > <[email protected]<mailto:[email protected]>> wrote: >> no >> >> simple config, static ip on the wan, private ip on lan, nat >> >> On Thu, May 12, 2016 at 2:30 PM, Josh Reynolds >> <[email protected]<mailto:[email protected]>> wrote: >>> >>> Did you copy the config from one CCR to the other? >>> >>> On Thu, May 12, 2016 at 1:24 PM, Gino Villarini >>> <[email protected]<mailto:[email protected]>> >>> wrote: >>> > Got a customer with a dedicated pipe, 250 Mbps >>> > >>> > Mimosa B11 to a CCR >>> > >>> > BW test from the CCR to our head router provides the BW no problem. >>> > >>> > But Laptop (capable) behind CCR in NAT mode, throughput dies at about >>> > 120 >>> > Mbps >>> > >>> > Changed routers, same issue >>> > >>> > Any ideas? >> >>
