Orale On May 15, 2016 9:36 AM, "Faisal Imtiaz" <fai...@snappytelecom.net> wrote:
> hehe.. yes I know.. I guess these are the nuances between Cuban Spanish / > Puerto Rican Spanish and Mexican Spanish... > There was another Cuban Spanish phrase I could have used, but it would not > have been appropriate for the list :) > > All of them are terms of endearment ! (not ! ) > > :) > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net > > ------------------------------ > > *From: *"Jaime Solorza" <losguyswirel...@gmail.com> > *To: *"Animal Farm" <af@afmug.com> > *Sent: *Sunday, May 15, 2016 11:08:41 AM > *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik > > Careful!!!!....como...can also be " I eat".... ...here is a better > translation... "mikrotik vale madre......" > On May 15, 2016 8:53 AM, "Faisal Imtiaz" <fai...@snappytelecom.net> wrote: > >> loose translation .... 'como mierada' ! >> >> >> :) >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >> >> ------------------------------ >> >> *From: *"Jaime Solorza" <losguyswirel...@gmail.com> >> *To: *"Animal Farm" <af@afmug.com> >> *Sent: *Sunday, May 15, 2016 10:36:02 AM >> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >> >> ...mikrotik POS? Piece of Salmon, point of sale, phaser on stun??? >> On May 15, 2016 7:34 AM, "Gino Villarini" <ginovi...@gmail.com> wrote: >> >>> faisal, thanks. I read this today, but we already fixed the issue by >>> replacing the mikrotik POS with a Juniper SRX100 unit... problem solved! >>> Thanks to all! >>> >>> On Fri, May 13, 2016 at 9:25 AM, Faisal Imtiaz <fai...@snappytelecom.net >>> > wrote: >>> >>>> Which model CCR are you using ? >>>> Pay attention to the ports you are using on that CCR due to how they >>>> are connected to the switch chip/CPU. >>>> e.g. on CCR 1008, don't use the 1st 4 ports (they are all on a switch >>>> chip with a 1g connection to the CPU, so with nat the packets can be >>>> hitting the CPU multiple times... >>>> >>>> if that does not work... then ......Just for kicks.... try the >>>> following:- >>>> >>>> Do the tests with one change at a time. >>>> -------------------- >>>> make sure you are on the latest 6.35.2 ROS and routerboard firmware is >>>> up to date. >>>> >>>> 1) Turn off connection tracking. >>>> >>>> 2) change the interface queue to multi-queue- ethernet (reboot >>>> required) >>>> >>>> 3) make sure flow control on the ports to the Radio are on. >>>> >>>> 4) put a simple queue for the desired BW on the CCR. >>>> ------------------- >>>> >>>> Regards. >>>> >>>> Faisal Imtiaz >>>> Snappy Internet & Telecom >>>> 7266 SW 48 Street >>>> Miami, FL 33155 >>>> Tel: 305 663 5518 x 232 >>>> >>>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >>>> >>>> ------------------------------ >>>> >>>> *From: *"Gino Villarini" <ginovi...@gmail.com> >>>> *To: *"Animal Farm" <af@afmug.com> >>>> *Sent: *Friday, May 13, 2016 9:01:22 AM >>>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>>> >>>> yes, using fiber, same issue >>>> >>>> On Thu, May 12, 2016 at 4:35 PM, can...@believewireless.net < >>>> p...@believewireless.net> wrote: >>>> >>>>> Did you check for duplex mismatch? >>>>> >>>>> On Thu, May 12, 2016 at 3:51 PM, Gino Villarini <ginovi...@gmail.com> >>>>> wrote: >>>>> >>>>>> laptop direct to mimosa has no issue >>>>>> >>>>>> Get Outlook for iOS <https://aka.ms/o0ukef> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Thu, May 12, 2016 at 12:47 PM -0700, "Jason Wilson" < >>>>>> ja...@remotelylocated.com> wrote: >>>>>> >>>>>> Rory had that issue with SME if the mimosa ptmp the CPU in the laptop >>>>>>> was maxing out. >>>>>>> On May 12, 2016 11:39 AM, "Josh Reynolds" <j...@kyneticwifi.com> >>>>>>> wrote: >>>>>>> >>>>>>>> http://wiki.mikrotik.com/wiki/Manual:Wiki/Fasttrack#Description >>>>>>>> >>>>>>>> >>>>>>>> On Thu, May 12, 2016 at 1:37 PM, Josh Reynolds < >>>>>>>> j...@kyneticwifi.com> wrote: >>>>>>>> > I don't know much about the CCRs. Do they have FastPath and >>>>>>>> FastTrack >>>>>>>> > enabled by default? >>>>>>>> > >>>>>>>> > On Thu, May 12, 2016 at 1:33 PM, Gino Villarini < >>>>>>>> ginovi...@gmail.com> wrote: >>>>>>>> >> no >>>>>>>> >> >>>>>>>> >> simple config, static ip on the wan, private ip on lan, nat >>>>>>>> >> >>>>>>>> >> On Thu, May 12, 2016 at 2:30 PM, Josh Reynolds < >>>>>>>> j...@kyneticwifi.com> wrote: >>>>>>>> >>> >>>>>>>> >>> Did you copy the config from one CCR to the other? >>>>>>>> >>> >>>>>>>> >>> On Thu, May 12, 2016 at 1:24 PM, Gino Villarini < >>>>>>>> ginovi...@gmail.com> >>>>>>>> >>> wrote: >>>>>>>> >>> > Got a customer with a dedicated pipe, 250 Mbps >>>>>>>> >>> > >>>>>>>> >>> > Mimosa B11 to a CCR >>>>>>>> >>> > >>>>>>>> >>> > BW test from the CCR to our head router provides the BW no >>>>>>>> problem. >>>>>>>> >>> > >>>>>>>> >>> > But Laptop (capable) behind CCR in NAT mode, throughput dies >>>>>>>> at about >>>>>>>> >>> > 120 >>>>>>>> >>> > Mbps >>>>>>>> >>> > >>>>>>>> >>> > Changed routers, same issue >>>>>>>> >>> > >>>>>>>> >>> > Any ideas? >>>>>>>> >> >>>>>>>> >> >>>>>>>> >>>>>>> >>>>> >>>> >>> >