Woahhhhh there are kids here, watch the language! ;) On May 15, 2016 10:41 AM, "Jaime Solorza" <[email protected]> wrote:
> Orale > On May 15, 2016 9:36 AM, "Faisal Imtiaz" <[email protected]> wrote: > >> hehe.. yes I know.. I guess these are the nuances between Cuban Spanish / >> Puerto Rican Spanish and Mexican Spanish... >> There was another Cuban Spanish phrase I could have used, but it would >> not have been appropriate for the list :) >> >> All of them are terms of endearment ! (not ! ) >> >> :) >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >> >> ------------------------------ >> >> *From: *"Jaime Solorza" <[email protected]> >> *To: *"Animal Farm" <[email protected]> >> *Sent: *Sunday, May 15, 2016 11:08:41 AM >> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >> >> Careful!!!!....como...can also be " I eat".... ...here is a better >> translation... "mikrotik vale madre......" >> On May 15, 2016 8:53 AM, "Faisal Imtiaz" <[email protected]> >> wrote: >> >>> loose translation .... 'como mierada' ! >>> >>> >>> :) >>> >>> Faisal Imtiaz >>> Snappy Internet & Telecom >>> 7266 SW 48 Street >>> Miami, FL 33155 >>> Tel: 305 663 5518 x 232 >>> >>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>> >>> ------------------------------ >>> >>> *From: *"Jaime Solorza" <[email protected]> >>> *To: *"Animal Farm" <[email protected]> >>> *Sent: *Sunday, May 15, 2016 10:36:02 AM >>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>> >>> ...mikrotik POS? Piece of Salmon, point of sale, phaser on stun??? >>> On May 15, 2016 7:34 AM, "Gino Villarini" <[email protected]> wrote: >>> >>>> faisal, thanks. I read this today, but we already fixed the issue by >>>> replacing the mikrotik POS with a Juniper SRX100 unit... problem solved! >>>> Thanks to all! >>>> >>>> On Fri, May 13, 2016 at 9:25 AM, Faisal Imtiaz < >>>> [email protected]> wrote: >>>> >>>>> Which model CCR are you using ? >>>>> Pay attention to the ports you are using on that CCR due to how they >>>>> are connected to the switch chip/CPU. >>>>> e.g. on CCR 1008, don't use the 1st 4 ports (they are all on a switch >>>>> chip with a 1g connection to the CPU, so with nat the packets can be >>>>> hitting the CPU multiple times... >>>>> >>>>> if that does not work... then ......Just for kicks.... try the >>>>> following:- >>>>> >>>>> Do the tests with one change at a time. >>>>> -------------------- >>>>> make sure you are on the latest 6.35.2 ROS and routerboard firmware is >>>>> up to date. >>>>> >>>>> 1) Turn off connection tracking. >>>>> >>>>> 2) change the interface queue to multi-queue- ethernet (reboot >>>>> required) >>>>> >>>>> 3) make sure flow control on the ports to the Radio are on. >>>>> >>>>> 4) put a simple queue for the desired BW on the CCR. >>>>> ------------------- >>>>> >>>>> Regards. >>>>> >>>>> Faisal Imtiaz >>>>> Snappy Internet & Telecom >>>>> 7266 SW 48 Street >>>>> Miami, FL 33155 >>>>> Tel: 305 663 5518 x 232 >>>>> >>>>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>>>> >>>>> ------------------------------ >>>>> >>>>> *From: *"Gino Villarini" <[email protected]> >>>>> *To: *"Animal Farm" <[email protected]> >>>>> *Sent: *Friday, May 13, 2016 9:01:22 AM >>>>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>>>> >>>>> yes, using fiber, same issue >>>>> >>>>> On Thu, May 12, 2016 at 4:35 PM, [email protected] < >>>>> [email protected]> wrote: >>>>> >>>>>> Did you check for duplex mismatch? >>>>>> >>>>>> On Thu, May 12, 2016 at 3:51 PM, Gino Villarini <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> laptop direct to mimosa has no issue >>>>>>> >>>>>>> Get Outlook for iOS <https://aka.ms/o0ukef> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Thu, May 12, 2016 at 12:47 PM -0700, "Jason Wilson" < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>> Rory had that issue with SME if the mimosa ptmp the CPU in the >>>>>>>> laptop was maxing out. >>>>>>>> On May 12, 2016 11:39 AM, "Josh Reynolds" <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> http://wiki.mikrotik.com/wiki/Manual:Wiki/Fasttrack#Description >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, May 12, 2016 at 1:37 PM, Josh Reynolds < >>>>>>>>> [email protected]> wrote: >>>>>>>>> > I don't know much about the CCRs. Do they have FastPath and >>>>>>>>> FastTrack >>>>>>>>> > enabled by default? >>>>>>>>> > >>>>>>>>> > On Thu, May 12, 2016 at 1:33 PM, Gino Villarini < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >> no >>>>>>>>> >> >>>>>>>>> >> simple config, static ip on the wan, private ip on lan, nat >>>>>>>>> >> >>>>>>>>> >> On Thu, May 12, 2016 at 2:30 PM, Josh Reynolds < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>> >>>>>>>>> >>> Did you copy the config from one CCR to the other? >>>>>>>>> >>> >>>>>>>>> >>> On Thu, May 12, 2016 at 1:24 PM, Gino Villarini < >>>>>>>>> [email protected]> >>>>>>>>> >>> wrote: >>>>>>>>> >>> > Got a customer with a dedicated pipe, 250 Mbps >>>>>>>>> >>> > >>>>>>>>> >>> > Mimosa B11 to a CCR >>>>>>>>> >>> > >>>>>>>>> >>> > BW test from the CCR to our head router provides the BW no >>>>>>>>> problem. >>>>>>>>> >>> > >>>>>>>>> >>> > But Laptop (capable) behind CCR in NAT mode, throughput dies >>>>>>>>> at about >>>>>>>>> >>> > 120 >>>>>>>>> >>> > Mbps >>>>>>>>> >>> > >>>>>>>>> >>> > Changed routers, same issue >>>>>>>>> >>> > >>>>>>>>> >>> > Any ideas? >>>>>>>>> >> >>>>>>>>> >> >>>>>>>>> >>>>>>>> >>>>>> >>>>> >>>> >>
