Yep...but most would just say "mierda" in disgust On May 16, 2016 5:27 AM, "Gino Villarini" <[email protected]> wrote:
> pedazo de mierda is more accurate > > On Sun, May 15, 2016 at 11:46 AM, Josh Reynolds <[email protected]> > wrote: > >> Woahhhhh there are kids here, watch the language! ;) >> On May 15, 2016 10:41 AM, "Jaime Solorza" <[email protected]> >> wrote: >> >>> Orale >>> On May 15, 2016 9:36 AM, "Faisal Imtiaz" <[email protected]> >>> wrote: >>> >>>> hehe.. yes I know.. I guess these are the nuances between Cuban Spanish >>>> / Puerto Rican Spanish and Mexican Spanish... >>>> There was another Cuban Spanish phrase I could have used, but it would >>>> not have been appropriate for the list :) >>>> >>>> All of them are terms of endearment ! (not ! ) >>>> >>>> :) >>>> >>>> Faisal Imtiaz >>>> Snappy Internet & Telecom >>>> 7266 SW 48 Street >>>> Miami, FL 33155 >>>> Tel: 305 663 5518 x 232 >>>> >>>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>>> >>>> ------------------------------ >>>> >>>> *From: *"Jaime Solorza" <[email protected]> >>>> *To: *"Animal Farm" <[email protected]> >>>> *Sent: *Sunday, May 15, 2016 11:08:41 AM >>>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>>> >>>> Careful!!!!....como...can also be " I eat".... ...here is a better >>>> translation... "mikrotik vale madre......" >>>> On May 15, 2016 8:53 AM, "Faisal Imtiaz" <[email protected]> >>>> wrote: >>>> >>>>> loose translation .... 'como mierada' ! >>>>> >>>>> >>>>> :) >>>>> >>>>> Faisal Imtiaz >>>>> Snappy Internet & Telecom >>>>> 7266 SW 48 Street >>>>> Miami, FL 33155 >>>>> Tel: 305 663 5518 x 232 >>>>> >>>>> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >>>>> >>>>> ------------------------------ >>>>> >>>>> *From: *"Jaime Solorza" <[email protected]> >>>>> *To: *"Animal Farm" <[email protected]> >>>>> *Sent: *Sunday, May 15, 2016 10:36:02 AM >>>>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>>>> >>>>> ...mikrotik POS? Piece of Salmon, point of sale, phaser on stun??? >>>>> On May 15, 2016 7:34 AM, "Gino Villarini" <[email protected]> wrote: >>>>> >>>>>> faisal, thanks. I read this today, but we already fixed the issue by >>>>>> replacing the mikrotik POS with a Juniper SRX100 unit... problem solved! >>>>>> Thanks to all! >>>>>> >>>>>> On Fri, May 13, 2016 at 9:25 AM, Faisal Imtiaz < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Which model CCR are you using ? >>>>>>> Pay attention to the ports you are using on that CCR due to how they >>>>>>> are connected to the switch chip/CPU. >>>>>>> e.g. on CCR 1008, don't use the 1st 4 ports (they are all on a >>>>>>> switch chip with a 1g connection to the CPU, so with nat the packets >>>>>>> can be >>>>>>> hitting the CPU multiple times... >>>>>>> >>>>>>> if that does not work... then ......Just for kicks.... try the >>>>>>> following:- >>>>>>> >>>>>>> Do the tests with one change at a time. >>>>>>> -------------------- >>>>>>> make sure you are on the latest 6.35.2 ROS and routerboard firmware >>>>>>> is up to date. >>>>>>> >>>>>>> 1) Turn off connection tracking. >>>>>>> >>>>>>> 2) change the interface queue to multi-queue- ethernet (reboot >>>>>>> required) >>>>>>> >>>>>>> 3) make sure flow control on the ports to the Radio are on. >>>>>>> >>>>>>> 4) put a simple queue for the desired BW on the CCR. >>>>>>> ------------------- >>>>>>> >>>>>>> Regards. >>>>>>> >>>>>>> Faisal Imtiaz >>>>>>> Snappy Internet & Telecom >>>>>>> 7266 SW 48 Street >>>>>>> Miami, FL 33155 >>>>>>> Tel: 305 663 5518 x 232 >>>>>>> >>>>>>> Help-desk: (305)663-5518 Option 2 or Email: >>>>>>> [email protected] >>>>>>> >>>>>>> ------------------------------ >>>>>>> >>>>>>> *From: *"Gino Villarini" <[email protected]> >>>>>>> *To: *"Animal Farm" <[email protected]> >>>>>>> *Sent: *Friday, May 13, 2016 9:01:22 AM >>>>>>> *Subject: *Re: [AFMUG] Odd issue - Mimosa B11 and Mikrotik >>>>>>> >>>>>>> yes, using fiber, same issue >>>>>>> >>>>>>> On Thu, May 12, 2016 at 4:35 PM, [email protected] < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Did you check for duplex mismatch? >>>>>>>> >>>>>>>> On Thu, May 12, 2016 at 3:51 PM, Gino Villarini < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> laptop direct to mimosa has no issue >>>>>>>>> >>>>>>>>> Get Outlook for iOS <https://aka.ms/o0ukef> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, May 12, 2016 at 12:47 PM -0700, "Jason Wilson" < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>> Rory had that issue with SME if the mimosa ptmp the CPU in the >>>>>>>>>> laptop was maxing out. >>>>>>>>>> On May 12, 2016 11:39 AM, "Josh Reynolds" <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> http://wiki.mikrotik.com/wiki/Manual:Wiki/Fasttrack#Description >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Thu, May 12, 2016 at 1:37 PM, Josh Reynolds < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> > I don't know much about the CCRs. Do they have FastPath and >>>>>>>>>>> FastTrack >>>>>>>>>>> > enabled by default? >>>>>>>>>>> > >>>>>>>>>>> > On Thu, May 12, 2016 at 1:33 PM, Gino Villarini < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >> no >>>>>>>>>>> >> >>>>>>>>>>> >> simple config, static ip on the wan, private ip on lan, nat >>>>>>>>>>> >> >>>>>>>>>>> >> On Thu, May 12, 2016 at 2:30 PM, Josh Reynolds < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>> >>>>>>>>>>> >>> Did you copy the config from one CCR to the other? >>>>>>>>>>> >>> >>>>>>>>>>> >>> On Thu, May 12, 2016 at 1:24 PM, Gino Villarini < >>>>>>>>>>> [email protected]> >>>>>>>>>>> >>> wrote: >>>>>>>>>>> >>> > Got a customer with a dedicated pipe, 250 Mbps >>>>>>>>>>> >>> > >>>>>>>>>>> >>> > Mimosa B11 to a CCR >>>>>>>>>>> >>> > >>>>>>>>>>> >>> > BW test from the CCR to our head router provides the BW no >>>>>>>>>>> problem. >>>>>>>>>>> >>> > >>>>>>>>>>> >>> > But Laptop (capable) behind CCR in NAT mode, throughput >>>>>>>>>>> dies at about >>>>>>>>>>> >>> > 120 >>>>>>>>>>> >>> > Mbps >>>>>>>>>>> >>> > >>>>>>>>>>> >>> > Changed routers, same issue >>>>>>>>>>> >>> > >>>>>>>>>>> >>> > Any ideas? >>>>>>>>>>> >> >>>>>>>>>>> >> >>>>>>>>>>> >>>>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>> >
