What does ignitenet say to this missing 10-15db? Alignment problem?




Von: Af [mailto:af-boun...@afmug.com] Im Auftrag von Carl Peterson
Gesendet: Donnerstag, 21. Juli 2016 17:58
An: af@afmug.com
Betreff: Re: [AFMUG] Metrolinq



We haven't had any issues with 5GHz but the 60GHz side underwhelms.  We tried a 
900' link and couldn't get the 60Ghz side to work.  We were able to move one 
end and get it down to 600' and have a 60GHz link at -55 but that is 10-15db 
below where it should be.  It's working, but at this point I wouldn't use it 
for anything over 500' or so.



On Thu, Jul 21, 2016 at 10:40 AM, Stefan Englhardt <s...@genias.net 
<mailto:s...@genias.net> > wrote:

We’ve only dfs bands in 5 GHz. Metrolinq supports only the lower band with 
lower allowed power (1W EiRP).

I’ve installed the newest FW before doing anything so I might be lucky to avoid 
the biggest problems (hopefully).





Von: Af [mailto:af-boun...@afmug.com <mailto:af-boun...@afmug.com> ] Im Auftrag 
von Faisal Imtiaz
Gesendet: Donnerstag, 21. Juli 2016 16:30
An: af@afmug.com <mailto:af@afmug.com>
Betreff: Re: [AFMUG] Metrolinq



Interesting.. most folks have the opposite issue.



FWIW, there is no dfs support on 5ghz (not sure about non-american rules).

If you are bench testing... you need to turn down the power on 5ghz .. way 
down....



Regards



Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232 <tel:305%20663%205518%20x%20232>

Help-desk: (305)663-5518 <tel:%28305%29663-5518>  Option 2 or Email: 
supp...@snappytelecom.net <mailto:supp...@snappytelecom.net>




  _____


From: "Stefan Englhardt" <s...@genias.net <mailto:s...@genias.net> >
To: af@afmug.com <mailto:af@afmug.com>
Sent: Thursday, July 21, 2016 8:13:34 AM
Subject: [AFMUG] Metrolinq

Got my first links. 60GHz work fine in lab. The 5GHz Part does strange things. 
Does not initialze or does not connect.

Syslog gives dfs or cant initialize messages.

60GHz is up immediately und runs stable in lab. Latency is low. Feels like a 1G 
cable connection. Powered by Netonix 24V.

Takes only 6 Watts. Good build quality. Webinterface is easy and fast.



So a cheap option for fast short hops where you dont want to dig.



















--

Carl Peterson

PORT NETWORKS

401 E Pratt St, Ste 2553

Baltimore, MD 21202

(410) 637-3707



Reply via email to