Take a look at /tool profile (on in Winbox) to see where the CPU load is going. It is probably going to routing for BGP but you can verify it here.
Is anything else running on the router? OSPF, VPN, PPPoE, etc? Where BGP really matters is when you lose one of your peers and it goes through and updates the tables. On lower powered boxes, this will peg the CPU and can cause OSPF flaps, dropped packets and other issues. On Mon, May 8, 2017 at 11:42 PM, Steve Jones <[email protected]> wrote: > We turned up BGP on one of our routers today, 2 peers, full routes, this > is just one upstream, we will be turning up bgp with another provider > shortly elsewhere on the network, I assume those tables will make their way > to this router. > load averaged 4-12% prior to turning up BGP now its running 60-90, even > occasionally pegged > > is this a matter of tuning BGP and ROS packages, or is this just too much > for the router? this is only at 150mbps, as we increase capacity I feel we > have already scaled out of this router if its not a misconfiguration of > something on my end > > > [image: Inline image 1] >
