If it's eating the entire core (which it is), it isn't doing fine. You're not 
having timely route convergence. 


On the 1100AHx2 vs. 1100AHx4: 
https://www.facebook.com/thebrotherswisp/posts/1200772160048234 




----- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 




----- Original Message -----

From: "Stefan Englhardt" <[email protected]> 
To: [email protected] 
Sent: Tuesday, May 9, 2017 6:29:56 AM 
Subject: Re: [AFMUG] rb1100ahx2 bgp load 

Works quite well and very stable on the bigger CCR models (memory). We use 
2x CCR1036-8G-2S+. 
Eating one of the cpus for the bgp process. 1100AHx2 cpu is a bit slow. 
There is a newer 1100AHx4 
which is twice as fast as 1100AHx2. 

Mikrotik BGP Routers are holy cows. There are no updates/config changes at 
normal times. 

On Tue, 9 May 2017 11:20:30 +0000 
Mike Hammett <[email protected]> wrote: 
> I hear there are some versions better than others in 
>terms of BGP performance, but Mikrotik BGP really belongs 
>on x86 boxes until v7 is out. 
> 
> 
> 
> 
> ----- 
> Mike Hammett 
> Intelligent Computing Solutions 
> 
> Midwest Internet Exchange 
> 
> The Brothers WISP 
> 
> 
> 
> 
> ----- Original Message ----- 
> 
>From: "[email protected]" 
><[email protected]> 
> To: [email protected] 
> Sent: Tuesday, May 9, 2017 5:59:50 AM 
> Subject: Re: [AFMUG] rb1100ahx2 bgp load 
> 
> 
> 
> Take a look at /tool profile (on in Winbox) to see where 
>the CPU load is going. It is 
> probably going to routing for BGP but you can verify it 
>here. 
> 
> 
> Is anything else running on the router? OSPF, VPN, 
>PPPoE, etc? 
> 
> 
> Where BGP really matters is when you lose one of your 
>peers and it goes through 
> and updates the tables. On lower powered boxes, this 
>will peg the CPU and can 
> cause OSPF flaps, dropped packets and other issues. 
> 
> 
> On Mon, May 8, 2017 at 11:42 PM, Steve Jones < 
>[email protected] > wrote: 
> 
> 
> 
> 
> We turned up BGP on one of our routers today, 2 peers, 
>full routes, this is just one upstream, we will be 
>turning up bgp with another provider shortly elsewhere on 
>the network, I assume those tables will make their way to 
>this router. 
> load averaged 4-12% prior to turning up BGP now its 
>running 60-90, even occasionally pegged 
> 
> 
> is this a matter of tuning BGP and ROS packages, or is 
>this just too much for the router? this is only at 
>150mbps, as we increase capacity I feel we have already 
>scaled out of this router if its not a misconfiguration 
>of something on my end 
> 
> 
> 
> 
> Inline image 1 
> 
> 
> 

----- GENIAS INTERNET -- www.genias.net ------ 
Stefan Englhardt Email: [email protected] 
Dr. Gesslerstr. 20 D-93051 Regensburg 
Tel: +49 941 942798-0 Fax: +49 941 942798-9 

Reply via email to