Well...Have fun porting 10K numbers. I didn't know anyone would port that
many.

On Thu, Jun 1, 2017 at 9:46 AM Chuck McCown <ch...@wbmfg.com> wrote:

> We would just be porting, not moving an NXX.
>
> *From:* Lewis Bergman
> *Sent:* Wednesday, May 31, 2017 7:36 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] VOIP Providers
>
>
> Maybe you didn't read it. Maybe you don't know whay your talking about in
> this specific instance.  Maybe I don't.  I am betting just this once it's
> you. Unless you have been a carrier in a remote rate center trying to get
> those NXX's somewhere else you may not be aware how this works.
>
> You can't port an NXX. You have to modify the LERG and assign those
> numbers to a different CLI. You can't,  or at least didn't use to be able
> to do that, without paying transport fees.  Last time I tried it they
> refused, as is their right, to do it with anything other than T1's or DS3
> which they would happily sell me. Of course I think Chuck would only have
> to pay the part of the circuit outside his rate center.
>
> In short, if you want to send an NXX somewhere, hook some Adtran boxes to
> your class 5 and route the NXX to it then send them wherever you like.
> That's the easiest solution and likely the cheapest long term.
>
> Voip is way easier than circuit switched. I don't know why Chuck doesn't
> just get some voip solution and did it himself.  Freepbx, NetSapiens,
> ipifony, Dialogic. There are so many.
>
> Ten again maybe your just sick of the distraction which I can completely
> understand.
>
> On Wed, May 31, 2017, 8:11 PM Mike Hammett <af...@ics-il.net> wrote:
>
>> He's not asking for anything special, other than the ratecenter he wants
>> covered.
>>
>>
>>
>>
>> -----
>> Mike Hammett
>> Intelligent Computing Solutions <http://www.ics-il.com/>
>> <https://www.facebook.com/ICSIL>
>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
>> <https://www.linkedin.com/company/intelligent-computing-solutions>
>> <https://twitter.com/ICSIL>
>> Midwest Internet Exchange <http://www.midwest-ix.com/>
>> <https://www.facebook.com/mdwestix>
>> <https://www.linkedin.com/company/midwest-internet-exchange>
>> <https://twitter.com/mdwestix>
>> The Brothers WISP <http://www.thebrotherswisp.com/>
>> <https://www.facebook.com/thebrotherswisp>
>>
>>
>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
>> ------------------------------
>> *From: *"Lewis Bergman" <lewis.berg...@gmail.com>
>> *To: *af@afmug.com
>> *Sent: *Wednesday, May 31, 2017 7:37:36 PM
>>
>> *Subject: *Re: [AFMUG] VOIP Providers
>>
>> NetSapiens does software. We have about 25 NXX's assigned to us.  There
>> is no way a standard voip provider can do what you want Chuck.  You have to
>> have somebody with an A-Z code and class 5 switch like you have. You then
>> have to reassign that block to that switch.  You then have to route that to
>> something that can turn it into voip. Your switch can I guess, I am sure
>> you know.  If outside your LATA you have to pay mileage. I think you are
>> the only one in your LATA right?
>>
>> Anyway. Call me If you want to talk about it Chuck.  I saw someone on a
>> voip list asking how to do this and describing your exact circumstances.  I
>> am guessing you talked to someone about it today.
>>
>> On Wed, May 31, 2017, 11:20 AM Mike Hammett <af...@ics-il.net> wrote:
>>
>>> NetSapiens does equipment, not service.
>>>
>>>
>>>
>>>
>>> -----
>>> Mike Hammett
>>> Intelligent Computing Solutions <http://www.ics-il.com/>
>>> <https://www.facebook.com/ICSIL>
>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
>>> <https://www.linkedin.com/company/intelligent-computing-solutions>
>>> <https://twitter.com/ICSIL>
>>> Midwest Internet Exchange <http://www.midwest-ix.com/>
>>> <https://www.facebook.com/mdwestix>
>>> <https://www.linkedin.com/company/midwest-internet-exchange>
>>> <https://twitter.com/mdwestix>
>>> The Brothers WISP <http://www.thebrotherswisp.com/>
>>> <https://www.facebook.com/thebrotherswisp>
>>>
>>>
>>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
>>> ------------------------------
>>> *From: *"Lewis Bergman" <lewis.berg...@gmail.com>
>>> *To: *af@afmug.com
>>> *Sent: *Wednesday, May 31, 2017 11:10:23 AM
>>>
>>> *Subject: *Re: [AFMUG] VOIP Providers
>>>
>>> CTI uses NetSapiens as do some others. They are a bit more expensive
>>> than some alternatives but if they do what they said they would do (handle
>>> 100% of all porting) that can be worth a bit depending on how big an ass
>>> your losing carrier wants to be. If this is going to be a main revenue
>>> source I would tell you to go ahead and go direct to NS. If not, probably a
>>> pretty good deal. Others on this list, Like Chuck Bender, might make you a
>>> better deal depending on what you want.
>>>
>>> I don't do any residential but a key to VoIP success up front is to
>>> limit the number of devices you support. I choose to only support 3 phones
>>> and one fax. I don't do ATA's at all. Trunks I handle with Adtran only.
>>>
>>>
>>>
>>> On Wed, May 31, 2017 at 10:58 AM Kurt Fankhauser <
>>> lists.wavel...@gmail.com> wrote:
>>>
>>>> I am using the CTI white label solution and it is very reliable,
>>>> biggest plus is no hardware and servers to maintain in my office. Its all
>>>> cloud based.
>>>>
>>>> On Tue, May 30, 2017 at 11:38 PM, Rory Conaway <r...@triadwireless.net>
>>>> wrote:
>>>>
>>>>> I waited for Ooma since last WISPAPALOOZA.  Finally gave up and
>>>>> partnered with a company last week.
>>>>>
>>>>> Rory
>>>>>
>>>>> -----Original Message-----
>>>>> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Rob Genovesi
>>>>> Sent: Tuesday, May 30, 2017 6:48 PM
>>>>> To: af@afmug.com
>>>>> Subject: Re: [AFMUG] VOIP Providers
>>>>>
>>>>> Ooma has launched a partnership programs with ISPs.  It's not fully
>>>>> white label as it requires the customer to use Ooma equipment (which means
>>>>> you can't use your own ATA).  An interesting option for anyone looking to
>>>>> add VOIP service without any overhead.
>>>>>
>>>>> We're not doing this (yet) but have talked to Ooma a few times.  If
>>>>> you want more info contact Tim Sullivan: tim.sulli...@ooma.com.
>>>>>
>>>>>
>>>>>
>>>>> Rob Genovesi • Coastside.Net • Owner
>>>>> 650-712-5900 • 525B Obispo Rd • Half Moon Bay CA
>>>>>
>>>>>
>>>>> On Tue, May 30, 2017 at 3:44 PM, Chuck McCown <ch...@wbmfg.com> wrote:
>>>>> > OK, then quote me white label hosted voip.
>>>>> >
>>>>> > From: Eric Kuhnke
>>>>> > Sent: Tuesday, May 30, 2017 4:27 PM
>>>>> > To: af@afmug.com
>>>>> > Subject: Re: [AFMUG] VOIP Providers
>>>>> >
>>>>> > Okay so that's not wholesale voip as telecom sales people would
>>>>> > usually define it. Wholesale usually meaning you connect your own SIP
>>>>> > server and run the traffic through a trunk, or set of trunks to
>>>>> > different providers based on optimal routing to destination. What
>>>>> > you're looking for is usually called white label hosted voip.
>>>>> >
>>>>> > On Tue, May 30, 2017 at 3:20 PM, Chuck McCown <ch...@wbmfg.com>
>>>>> wrote:
>>>>> >>
>>>>> >> Each ATA will register to the VOIP supplier.
>>>>> >>
>>>>> >> No, I already have a VoIP server called a GenBand Class 5 central
>>>>> >> office switch.
>>>>> >> I will not be using that for this service.
>>>>> >>
>>>>> >> From: Eric Kuhnke
>>>>> >> Sent: Tuesday, May 30, 2017 3:59 PM
>>>>> >> To: af@afmug.com
>>>>> >> Subject: Re: [AFMUG] VOIP Providers
>>>>> >>
>>>>> >> I think you may misunderstand VoIP....  This is a gross
>>>>> >> oversimplification but in general an ATA speaks analog POTS/dialtone
>>>>> >> on one side, and ethernet/IP and SIP on the other. Do you intend to
>>>>> >> have each the ATAs connect individually, directly to the service
>>>>> >> provider, or do you plan to run your own VoIP server which they
>>>>> will register to?
>>>>> >>
>>>>> >>
>>>>> >>
>>>>> >> On Tue, May 30, 2017 at 2:55 PM, Chuck McCown <ch...@wbmfg.com>
>>>>> wrote:
>>>>> >>>
>>>>> >>> Not looking for SIP trunking.  The calls will come from and go to
>>>>> an
>>>>> >>> ATA in the subscribers home.
>>>>> >>>
>>>>> >>> From: Eric Kuhnke
>>>>> >>> Sent: Tuesday, May 30, 2017 3:47 PM
>>>>> >>> To: af@afmug.com
>>>>> >>> Subject: Re: [AFMUG] VOIP Providers
>>>>> >>>
>>>>> >>> How many DIDs and how many minutes/month of SIP trunking are we
>>>>> >>> talking about?  You're looking for a whoelsale SIP trunking
>>>>> provider
>>>>> >>> to use with your own VoIP system, or you want it fully hosted?
>>>>> >>>
>>>>> >>> What kind of monthly spend are you looking at if you took all of
>>>>> >>> your minutes/month and figured that via wholesale SIP trunk they
>>>>> >>> might cost an average of 7/10ths of 1 cent per minute (0.007/min)?
>>>>> >>>
>>>>> >>> Voxbeam, Flowroute and Voip Innovations come to mind.
>>>>> >>>
>>>>> >>> On Tue, May 30, 2017 at 2:44 PM, Chuck McCown <ch...@wbmfg.com>
>>>>> wrote:
>>>>> >>>>
>>>>> >>>> I need a wholesale voip provider to serve my ILEC territory in
>>>>> >>>> Utah.  I would port my local 801-789 numbers to the VOIP provider.
>>>>> >>>>
>>>>> >>>> We need unlimited LD and solid 911.  Would prefer someone local.
>>>>> >>>>
>>>>> >>>> So, before I give XMission a call I thought I would put this out
>>>>> there.
>>>>> >>>
>>>>> >>>
>>>>> >>
>>>>> >>
>>>>> >
>>>>> >
>>>>>
>>>>
>>>>
>>>

Reply via email to