I have seen down/up on an Ethernet interface before. On the older code of PIX's (5.x) , interfaces were required to be connected even if they were shutdown for a failover config. This was for keepalive purposes... You would end up with an admin down/up, as it was shutdown, but still receiving keepalives... Talk about a condition to make you scratch your head...
Thanks Larry -----Original Message----- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Friday, June 21, 2002 10:23 AM To: [EMAIL PROTECTED] Subject: Re: serial interface down/down or up/down [7:47101] I have seen down/up, but this was on xGS routers around release 9.x. In those cases, it meant there was a main processor hardware (or rarely software) failure. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=47164&t=47101 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]